• 대한전자공학회논문지TC
• /
• 제43권11호
• /
• pp.95-117
• /
• 2006

본 논문에서는 IEEE 802.16e OFDMA/TDD 이동국 모뎀의 링크 성능과 복잡도 최적화를 위한 부동 및 고정 소수점 설계에 대하여 논한다. 부동 소수점 설계에서는 이동국 모뎀에서 하향링크 트래픽 채널의 채널 추정 방법을 제안하고, 모의실험을 통하여 최적의 알고리즘을 선정한다. 그리고 시간 및 주파수 동기화, Digital Front End와 CINR 추정 기법에 관하여 성능 향상과 시스템을 최적화하기 위한 알고리즘을 제안하고, 상향링크의 트래픽 채널과 제어 채널의 부동 소수점 설계 방법을 논한다. 제안된 알고리즘은 IEEE 802.16e OFDMA/TDD 시스템에 적용하여, 모의실험을 통한 성능을 Detection Probability, Mean Acqusition Time, PER 성능 그래프 등으로 그 우수성을 검증한다. 고정 소수점 설계에서는 부동 소수점 설계로부터 최적의 고정 소수점 설계를 위한 효율적인 방법론을 제시한다. 그리고 하향링크와 상향링크의 트래픽 채널, 시간 및 주파수 동기, DFE 블록을 고정 소수점 설계하고, 모의실험을 통하여 성능과 복잡도 간의 tradeoff 관계를 최적화한다.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 Bulletin of The 5th Asian Design Conference International Symposium on Design Science
• /
• pp.7.2-7
• /
• 2001

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.301-304
• /
• 2000

In this paper, we designed a 256-point FFT processor using VHDL. We adopted Radix-2$^2$SDC(Single-path Delay Commutator) architectures to reduce the number of complex multipliers. We confirmed the operation of the design through simulation using Altera MAX+PLUS II.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 학술대회
• /
• pp.255-260
• /
• 1999

본 논문에서는 데이터 입출력을 고속으로 수행하며 작은 지연시간을 갖는 512-point FFT프로세서의 구조및 설계에 대하여 보인다. 설계된 512-point FFT프로세서는 OFDM방송에서 요구하는 심볼 레이트로 테이타를 처리할 수 있는 것을 목표로 하였다. 설계된 512-point FFT프로세서는 써플메모리를 이용하여 메모리의 요구사항을 최소화하며, 새로운 strength reduction method를 적용한 복소곱셈기를 이용하여 기존의 복소곱셈기에 비하여 하드웨어의 비용이 적은 특징을 갖는다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.198-208
• /
• 1998

For the development of a gas turbine engine, repetitive calculation process to determine design point and off-design performance based on basic design requirements resulted from the market survey is necessary Due attention then, must be given that design process must be carried out within the mechanical limits satisfying conservation laws of mass, work as well as speed equilibrium between the components for maximum performance. It is the purpose of the present study to deal with technical particulars during design point and off-design process of gas turbine engine performance analysis for simple cycle as well as combined cycle.

• 한국의상디자인학회지
• /
• 제25권3호
• /
• pp.157-164
• /
• 2023

The purpose of this study is to compare and analyze bust point information presented in literature and the 8th Korean Anthropometric Survey (Size Korea 2021) as a basis for pattern making for Korean adult women. Therefore, the the bust point position was analyzed through the length from the side neckline to the bust point and the horizontal length from the bust point to the chest. The results are as follows. First, Size Korea's population shows an increase in bust circumference and Side Neck Point to Bust Point with age, with the largest Bust-Point Breadth in the 30s, followed by the 20s, 40s, 60s, and 50s. Second, the Bust-Point Breadth in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created from the bust circumference measurements of Size Korea's population, was wider than the measurements, and the difference was verified as a highly significant. Third, in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee created with the bust circumference dimensions of Size Korea's population, the length of Neck Point to Bust Point was shorter than the measured value, and the difference was highly significant. Fourth, the Bust-Point Breadth and Neck Point to Bust Point in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created with the bust circumference of the population of Size Korea by age, were analyzed in different age groups and showed significant differences from the measurements of Size Korea.

• 한국CDE학회논문집
• /
• 제11권5호
• /
• pp.335-343
• /
• 2006

Design changes for an original surface model are frequently required in a manufacturing area: for example, when the physical parts are modified or when the parts are partially manufactured from analogous shapes. In this case, an efficient 3D model updating method by locally adding scan data for the modified area is highly desirable. For this purpose, this paper presents a new procedure to update an initial model that is composed of combinatorial triangular facets based on a set of locally added point data. The initial surface model is first created from the initial point set by Tight Cocone, which is a water-tight surface reconstructor; and then the point cloud data for the updates is locally added onto the initial model maintaining the same coordinate system. In order to update the initial model, the special region on the initial surface that needs to be updated is recognized through the detection of the overlapping area between the initial model and the boundary of the newly added point cloud. After that, the initial surface model is eventually updated to the final output by replacing the recognized region with the newly added point cloud. The proposed method has been implemented and tested with several examples. This algorithm will be practically useful to modify the surface model with physical part changes and free-form surface design.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.35-41
• /
• 2011

In order to design effectively the grounding system, it is very important to determine the optimum soil resistivity at the desired location of the connection to earth. This paper deals with the reasonable methods of measuring the soil resistivity where grounding electrodes are buried. The soil resistivity at three test sites with different resistivity of soil were measured as functions of the spacing between the test probes in the Wenner's four-point method and the length of test ground rod in the three-point method. In the case of the three-point method, the length of test ground rod of 2-10[m] in length was appropriate in two-layered soil structure. In the length range of 2-10[m], the results measured by the three-point method using the test ground rod with the length corresponding to the spacing between the test probes of the Wenner's four-point method are in good agreement with the data obtained from the Wenner's four-point method.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.91-101
• /
• 2004

For the grillage which is common types of structures in marine and land-based structural system, the elastic response and design methods are usually applied. However, plastic analysis and design methods are considered Tn those structures to maintain the structural stability at the limit states. In grillage design, the central intersection point load may be used as a worst loading condition. However, a point load may often move around on the grid system. in such case, the worst load point would not necessarily be at the central point. To investigate the variation of plastic collapse load according to the location of moving load between intersections, the plastic collapse loads are obtained for the three types of grillages with simply-supported ends. From the result of each case, it is confirmed that the worst load point is located between intersections. General formulae related with plastic collapse loads for the three groups of grillages with simply-supported boundaries are derived. Those plastic collapse formulae for the grillages are applied to the design of pontoon deck, and optimum design procedure is illustrated. Consequently, general formulae for the plastic collapse of grillages derived from this study can be easily applied to the plastic analysis and optimum design of similar grillages.

• Journal of the Korean Statistical Society
• /
• 제30권1호
• /
• pp.163-178
• /
• 2001

We consider the experimental design problem of selecting values of design variables x for observation of a response y that depends on x and on model parameters $\theta$. The form of the dependence may be quite general, including all linear and nonlinear modeling situations. The goal of the design selection is to efficiently estimate functions of $\theta$. Three new criteria for selecting design points x are presented. The criteria generalized the usual Bayesian optimal design criteria to situations n which the prior distribution for $\theta$ amy be uncertain. We assume that there are several possible prior distributions,. The new criteria are applied to the nonlinear problem of designing to estimate the turning point of a quadratic equation. We give both analytic and computational results illustrating the robustness of the optimal designs based on the new criteria.