• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.95-117
• /
• 2006

In this paper, we describe the optimization of the link-level performance and the complexity of floating-point and fixed-point methods in IEEE 802.16e OFDMA/TDD mobile modem. In floating-point design, we propose the channel estimation methods for downlink traffic channel and select the optimized method using computer simulation. So we also propose efficent algorithms for time and frequency synchronization, Digital Front End and CINR estimation scheme to optimize the system performance. Furthermore, we describe fixed-point method of uplink traffic and control channels. The superiority of the proposed algorithm is validated using the performances of Detection, False Alarm, Missing Probability and Mean Acquisition Time, PER Curve, etc. For fixed-point design, we propose an efficient methodology for optimized fixed-point design from floating-point At last, we design fixed-point of traffic channel, time and frequency synchronization, DFE block in uplink and downlink. The tradeoff between performance and complexity are optimized through computer simulations.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.7.2-7
• /
• 2001

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.301-304
• /
• 2000

In this paper, we designed a 256-point FFT processor using VHDL. We adopted Radix-2$^2$SDC(Single-path Delay Commutator) architectures to reduce the number of complex multipliers. We confirmed the operation of the design through simulation using Altera MAX+PLUS II.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.255-260
• /
• 1999

This paper shows the design of a high throughput 512-point FFT processor. The performance target of the 512-point FFT processor is to achieve data symbol rate required for OFDM systems. The memory requirement of the 512-point FFT processor is minimized by adopting shuffle memory system. The hardware cost of the 512-point in processor is further reduced by using a complex multiplier with a new strength reduction method.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.198-208
• /
• 1998

For the development of a gas turbine engine, repetitive calculation process to determine design point and off-design performance based on basic design requirements resulted from the market survey is necessary Due attention then, must be given that design process must be carried out within the mechanical limits satisfying conservation laws of mass, work as well as speed equilibrium between the components for maximum performance. It is the purpose of the present study to deal with technical particulars during design point and off-design process of gas turbine engine performance analysis for simple cycle as well as combined cycle.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.157-164
• /
• 2023

The purpose of this study is to compare and analyze bust point information presented in literature and the 8th Korean Anthropometric Survey (Size Korea 2021) as a basis for pattern making for Korean adult women. Therefore, the the bust point position was analyzed through the length from the side neckline to the bust point and the horizontal length from the bust point to the chest. The results are as follows. First, Size Korea's population shows an increase in bust circumference and Side Neck Point to Bust Point with age, with the largest Bust-Point Breadth in the 30s, followed by the 20s, 40s, 60s, and 50s. Second, the Bust-Point Breadth in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created from the bust circumference measurements of Size Korea's population, was wider than the measurements, and the difference was verified as a highly significant. Third, in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee created with the bust circumference dimensions of Size Korea's population, the length of Neck Point to Bust Point was shorter than the measured value, and the difference was highly significant. Fourth, the Bust-Point Breadth and Neck Point to Bust Point in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created with the bust circumference of the population of Size Korea by age, were analyzed in different age groups and showed significant differences from the measurements of Size Korea.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.5
• /
• pp.335-343
• /
• 2006

Design changes for an original surface model are frequently required in a manufacturing area: for example, when the physical parts are modified or when the parts are partially manufactured from analogous shapes. In this case, an efficient 3D model updating method by locally adding scan data for the modified area is highly desirable. For this purpose, this paper presents a new procedure to update an initial model that is composed of combinatorial triangular facets based on a set of locally added point data. The initial surface model is first created from the initial point set by Tight Cocone, which is a water-tight surface reconstructor; and then the point cloud data for the updates is locally added onto the initial model maintaining the same coordinate system. In order to update the initial model, the special region on the initial surface that needs to be updated is recognized through the detection of the overlapping area between the initial model and the boundary of the newly added point cloud. After that, the initial surface model is eventually updated to the final output by replacing the recognized region with the newly added point cloud. The proposed method has been implemented and tested with several examples. This algorithm will be practically useful to modify the surface model with physical part changes and free-form surface design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.35-41
• /
• 2011

In order to design effectively the grounding system, it is very important to determine the optimum soil resistivity at the desired location of the connection to earth. This paper deals with the reasonable methods of measuring the soil resistivity where grounding electrodes are buried. The soil resistivity at three test sites with different resistivity of soil were measured as functions of the spacing between the test probes in the Wenner's four-point method and the length of test ground rod in the three-point method. In the case of the three-point method, the length of test ground rod of 2-10[m] in length was appropriate in two-layered soil structure. In the length range of 2-10[m], the results measured by the three-point method using the test ground rod with the length corresponding to the spacing between the test probes of the Wenner's four-point method are in good agreement with the data obtained from the Wenner's four-point method.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.91-101
• /
• 2004

For the grillage which is common types of structures in marine and land-based structural system, the elastic response and design methods are usually applied. However, plastic analysis and design methods are considered Tn those structures to maintain the structural stability at the limit states. In grillage design, the central intersection point load may be used as a worst loading condition. However, a point load may often move around on the grid system. in such case, the worst load point would not necessarily be at the central point. To investigate the variation of plastic collapse load according to the location of moving load between intersections, the plastic collapse loads are obtained for the three types of grillages with simply-supported ends. From the result of each case, it is confirmed that the worst load point is located between intersections. General formulae related with plastic collapse loads for the three groups of grillages with simply-supported boundaries are derived. Those plastic collapse formulae for the grillages are applied to the design of pontoon deck, and optimum design procedure is illustrated. Consequently, general formulae for the plastic collapse of grillages derived from this study can be easily applied to the plastic analysis and optimum design of similar grillages.

• Journal of the Korean Statistical Society
• /
• v.30 no.1
• /
• pp.163-178
• /
• 2001

We consider the experimental design problem of selecting values of design variables x for observation of a response y that depends on x and on model parameters $\theta$. The form of the dependence may be quite general, including all linear and nonlinear modeling situations. The goal of the design selection is to efficiently estimate functions of $\theta$. Three new criteria for selecting design points x are presented. The criteria generalized the usual Bayesian optimal design criteria to situations n which the prior distribution for $\theta$ amy be uncertain. We assume that there are several possible prior distributions,. The new criteria are applied to the nonlinear problem of designing to estimate the turning point of a quadratic equation. We give both analytic and computational results illustrating the robustness of the optimal designs based on the new criteria.