• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.123-127
• /
• 2009

This study was carried out to investigate the classification and the growing characteristics of biennial weed species in a newly formed transplanting lawn grass land. Measuring size in the experimental plot was $1{\times}1m$ in the 9 different locations, and experimental design was randomized complete plot with 3 replications. The results obtained are summarized as follows. 1) Weed species in a newly formed lawn field are consisted of 29.4% of Cruciferae, 29.4% of Compositae, 23.5% of Caryophyllaceae, 11.8% of Gramineae, and 5.9% of Labiatae family 2) Emerging percentage of weed species are consisted of 47.1% on October, 41.2% on November, 5.9% on both September and December, respectively. 3) Distribution rate about flowering time of weed species was in order of 58.5% on May, 23.5% on April, 11.8% on March, and 5.9% on June. 4) Weed species were grouped according to the plant height. It was observed that below 20cm, 20-40cm, 40-60cm and above 60cm of plant height were 23.5%, 47.1%, 17.6% and 11.8%, respectively.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.799-814
• /
• 2021

Information is lacking about the effect of date of a fall cut of alfalfa (Medicago sativa L.) on dry matter yield (DMY), forage nutritive value, and stands persistence. The objective of this study was to determine the effect of timing of a fall cut on DMY, forage nutritive value and stand persistence of three alfalfa varieties: low-lignin Hi-Gest 360, Roundup Ready Tonica, and conventional Gunner in Northeastern Kansas in the United States. The field study was carried out by splitting plot in randomized complete block design with four replications. The harvesting data of different maturity stages were collected in each year from 2015 to 2018. Three cuts were harvested based on the stage of maturity, and the last (fourth) cut was done on September 15, September 30, October 15, and October 30 of each year. The persistence of the alfalfa stands was determined each fall after the last cut, and each spring after the first cut, by counting the number of live plants in a randomly placed quadrat in each plot. Alfalfa cut on September 15 and September 30 had a higher stand persistence compared to alfalfa cut on October 15 and October 30. The DMY of the first cut in 2016 was significantly higher in roundup ready than the low-lignin alfalfa variety. In the second cut, DMY was significantly higher in conventional alfalfa than the roundup ready. There were no significant differences in DMY between alfalfa varieties in the rest of seasonal cuttings in 2016 and 2017 and annual total yield in both years. In general, low lignin alfalfa variety had higher crude protein and relative feed value and lower acid detergent fiber and neutral detergent fiber contents than those in roundup ready and conventional alfalfa varieties. On average, nutritive value of alfalfa was generally affected by last cutting dates in 2017. Based on 3-year data the last cutting of alfalfa in the fall could be done by September 30-October 15 without harmful effect on DMY.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.133-137
• /
• 1969

This experiment was conducted to determine the optimum row width and plant spacing within row under the tropical environment for a leading soybean variety Palmetto and it was carried out at Eakmat Experiment Station in Vietnam. The experiments were arranged in a split plot design with four replications and the test was repeated twice in two years. Variations for seed yield due to the distance between rows were significant at 1 per cent level in 1967 test(dry season growing) and at 5 per cent level in 1968 test. Significant differences for plant height, lodging, maturity, number of branches per plant, and number of pods per plant due to the row width were not found in both tests, while significant differences in difference spacing within row was found in all traits studied. Interaction between width of row and spacing within row for seed yield and plant height were found at five percent level in 1967 test. These results indicate that close planting may increase in seed yield and plant height in both seasons, and decrease in loadging. From these studies, one could be understood that the plant population, particularly in dry season, plays decisive roles on seed yield in soybean culture, and the maximum plant height and minimum value of lodging index were also observed in closest spacing plots. The highest soybean yield in late planting would be expected by a combinations of 30 cm(between rows)${\times}$5cm(between hills) plot, while 40cm ${\times}$ 5cm planting method would be suggested for rainy season growing. Highest seed yield was obtained at closet spacing in both dry and rainy season, and these results led to drilling method in seeding where about 20 seeds per meter of row could be recommended. Besides the seed yield, the close planting may produce some advantages, such as increase plant height and decrease lodging, weeds and erosion of surface soil.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1524-1534
• /
• 2022

Objective: The objective was to test if creep feeding (CF) improves the average daily gain (ADG) and weaning weight of calves submitted to temporary weaning (TW) and if the combination of CF and TW improves conception and pregnancy rates of cows. Methods: Primiparous (n = 74) and primiparous and multiparous (n = 104) cows grazing native grasslands were used in experiment 1 and 2; respectively. The experimental design was in plots divided into complete random blocks with two replications. The CF was the big plot and TW the small plot, thus four experimental groups were formed: i) -CF-TW (n = 21 and 27); ii) -CF+TW (n = 16 and 24); iii) +CF-TW (n = 20 and 26); iv) +CF+TW (n = 17 and 27) with cow-calf pairs for experiments 1 and 2; respectively. Nose plate application for TW had a duration of 14 and 15 days for experiment 1 and 2: respectively. In experiment 1, calves were fed at 1% of live weight for 112 days using a commercial supplement with 18.4% crude protein. In experiment 2, the supplementation lasted 98 days, and was carried out with corn dried distillers grains with soluble (DDGS) at 40% of the potential intake on a daily basis. Results: The TW reduced ADG during the TW period and the following 14 days, but the negative effect of TW was maintained until the final weaning only in experiment 2. The CF increased ADG during TW period in both experiments. The TW promoted an earlier conception of the dams (12 days in -CF treatment and 19 days in +CF treatment, p<0.01) and CF increased pregnancy rate in experiment 1, being the effects not consistent between experiments. Conclusion: The CF consistently promoted an increase in ADG during the period of TW and increased final weaning weight of calves, therefore it is economically viable.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.3
• /
• pp.2322-2341
• /
• 1971

The studies were conducted to determine the methods of irrigation control which is not only able to save the irrigation water as a adaptable measures for the insufficient irrigation water and the drought but also increase the yields of rice, in the paddy field which shows over percolating tendency through the couple years of 1968 and 1969 at Suwon. These experiments were carried with late maturing rice variety, Norim No. 6 and the major treatments in this experiments were filling the clay under surface soil, periodic irrigation and lining the Vinyl under the surface soil and three replicated completely randomized design was employed. Results obtained will be summarzed as follows. 1. Through the couple years, the plots tilled the clay under 15cm of the surface soil saved the irrigation water by 364% to 45% and 78% to 88% respectively. Particulary, the plot of filling the clay with 9cm thick under 15cm of the surface soil, saved the amount of irrigation water by 45% to 88% and also increased yields by 12% to 20% through the couple years. 2. The plots in which amount of 40mm of irrigation water is irrigated periodically from 5 to 8 days at the stages of tillering and ripening, saved theamount of irrigation water by 41% to 55% and also increased yields by 10% to 16% respectively through the couple years. 3. The plot lined the Vinyl under 15cm of the surface soil, saved the amount of irrigation water by 75% to 88% in accordance with the size of hole. The plot of lining the Vinyl with $3cm/m^2$ hole yielded almost same as the check plot, but in the case of lesser hole than above yielded less. 4. The plots inserted the Vinyl paper in 57cm depth and with 6cm height from the soil surface around the plot to prevent the ridge percolation reduced the amount of percolation by 25% to 33%. 5. The plot filled the wheat straw with 6cm thick under 15cm of the surface soil increased yields by 30% in former year but opposite results were gained in later year. 6. Generally, yields and yield components such as number of spikes of spikes per hill and number of grains per spike were decreased in 1969. These faots are considered to depend upon the rainy and cold weather in the stages of vigorous tillering and less sunshine in the stages of ripening. 7. The variation of characters among the plots will be summarized as follows. (1) Tallerplant height was found in the plots of clay filling and irrigation control. (2) longer culm length and higher yields were founds in the plots filled the clay with 9cm thick and controled the irrigation periodically froir 7 to 8 days. (3) Length of spike increased generally with yields but opposite tendency was found also. (4) Number of spikes per hill increased with yields in the plots of irrigation control. (5) Number of grains per spike increased with yields in the plots filled the clay with 9cm thick and controled irrigation periodically from 5 to 8 days. (6) Tendency of variation of 1000 grain weight is similar to Number of grains per spike. (7) Percentage of complete grains increased in the plot of clay filling and irrigation control.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.471-482
• /
• 2015

In this paper, design and implementation of the 94 GHz Gunn oscillator and the evaluation of the maximum power of the Gunn diode used in the oscillator are presented. The 94 GHz Gunn oscillator is used InP Gunn diode and designed employing a WR-10 waveguide. The designed oscillator is fabricated through machining and its performance is measured. The fabricated oscillator shows an oscillation frequency of 95 GHz, output power of 12.64 dBm, and phase noise of -92.7 dBc/Hz at 1 MHz offset frequency. To evaluation the maximum power of the InP Gunn diode used in oscillator, the oscillator structure is modified to a structure having a diaphram. The height of thick diaphram which is used in the oscillator is varied. As a result, an oscillator has several different load impedances, which makes it possible to plot $G_L-V^2$ plot at the post plane. Using the $G_L-V^2$ plot, the maximum power of used Gunn diode including post is computed to be 16.8 dBm. Furthermore using the shorted and zero bias Gunn diode, the post loss used for DC biasing can be computed. Using the two losses, The maximum power of a InP Gunn diode is computed to be 18.55 dBm at 95 GHz. This result is close to a datasheet.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.3
• /
• pp.219-229
• /
• 1993

Effects of paper mill sludge-fertilizers were investigated on the growth performances of tree seedlings under field conditions. Two types of sludge-fertilizers applied were an organic sludge compost and a processed sludge-pellet fertilizer strengthened with several components of organic and inorganic nutrients. Three species of tree seedlings studied were ibota privet(Ligustrum obtusifolium) and yellow poplar(Liriodendron tulipifera) of 1-0 year seedlings and also eastern white pine(Pinus strobus) of 2-2 year seedlings. Nitrogen and phosphorus contents of plot soil treated with sludge compost+sludge-pellet fertilizer+sludge-pellet fertilizer plot were increased to 8 times and 2.6 times as those of control plot, respectively. The growth performances of root collar diameter and seedling height were repeatedly measured up to five times through the growing season and the results were analyzed statistically by analysis of variance of randomized block design and Duncan's multiple range test. The growth performances of dry weight were measured after last fifth measurements.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.191-202
• /
• 2001

Experiments were conducted on established grassland sward at Gongiam, Kwangju, and Kyung-gi in Korea from 1995 to 1997. The influence of mineral-N fertilizer or animal manure(AW) on herbage dry matter(DM) yield, N yield, the recovery of AM-N, and soil N and organic matter(0M) content in the mixed sward('potomac' orchardgrass, 'fawn' tall fescue, and 'kenblue' Kentuky bluegrass) was investigated. The treatments were replicated three times in a split plot block design. AM(the main plots) was applied at 200kg N ha ' year ' on each plot. The types of AM were cattle feedlot manure(CFM), pig manure fermented with sawdust(PMFS) and Korea native cattle slurry(KNCS). Three levels of mineral-N fertilizer, as urea, ranging from 0 to 200kg N $ha^{-1}\;year^{-1}$ in 100kg increments, were superimposed on each plot. The fertilizers and AM were applied in two equal dressings(the end of March and middle of November). AM and mineral fertilizer had significant effects(p<0.05) on herbage DM and N yields. Herbage yields in KNCS were higher than those in CFM and PMFS(p

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.15-21
• /
• 2009

The design of the stud shear connector of a bridge structure is mostly controlled by the fatigue resistance not by the strength, if it is followed by AASHTO LRFD Bridge Design Specification. This fatigue design code in AASHTO LRFD is based on the research work done by Slutter and Fisher in 1966. These tests seemingly underestimated the fatigue resistance of connectors because of the inherent eccentricity of the one-face test setup which results additional tension forces to the stud. In addition, the stress ranges were not plotted in the log scale, because it was not known at that time that the fatigue resistance of the welded steel structures has a linear relationship of log scales of stress range and number of loading cycles. This study evaluates the test data produced by the Slutter and Fischer, and plot the data on the proper manner. The fatigue push-out test data produced recently by many other researches all around the world are gathered and analyzed, furthermore a design curve is recommended.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1108-1110
• /
• 1995

This paper presents a balanced CMOS complementary folded cascode OP-AMP topology that achieves improved DC gain using the gain boosting technique, a high unity-gain frequency and improved slew rate using the CMOS complementary cascode structure and a high PSRR using the balanced output stage. Bode-plot measurements of a balanced CMOS complementary folded cascode OP-AMP show a DC gain of 80dB, a unity-gain frequency of 110MHz and a slew rate of $274V/{\mu}s$(1pF load). This balanced CMOS complementary folded cascode OP-AMP is well suited for high frequency analog signal processing applications.