• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.537-546
• /
• 2005

An experiment was conducted to determine the effect of supplementation of chlortetracycline (CTC,110ppm), copper sulfate(Cu, 125ppm) and two levels of probiotics(Prob I, 0.04%, Prob II, 0.1%), Bacillus licheniformis and Bacillus subtilis) on growth performance, nutrient digestibility and manure characteristics in growing pigs. A total of 50 pigs that averaged 20.78$\pm$0.35kg BW and 50$\pm$2.3d age were allocated in a randomized block design with two pigs per pen and 5 pens per treatment. Pigs and feeders were weighed 10-days interval for the 40-d trials to determine ADG, ADFI and feed:gain ratio(F:G). Average daily gain, feed intake, feed/gain and nutrient digestibility were not improved(P>0.10) by the supplementation of CTC, Cu and two levels of probiotics. There were significant(P<0.05) Cu effects on digestibility of crude protein, and probiotics effects on digestibilities on organic matter, crude protein and energy between first 20 days and subsequent 20 days. Fecal concentrations of copper were highly increased(P<0.001) by the copper supplementation. Total bacteria and coliform counts were not altered by the supplementation of CTC, Cu and two levels of probiotics. Ammonia emission from slurry, measured during first 3 weeks, was reduced (P<0.001) in pigs fed diet with 125 ppm copper from copper sulfate. Results indicate that CTC, Cu and Probiotics supplementation had a little or not positive effect on grower pig performance under sound environmental conditions. Further studies may be warranted to investigate the effects of dietary copper-either reduced or in combination with dietary ammonia control agents-on the ammonia emission characteristics of swine manure.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2005

An experiment was conducted to determine the effect of supplementation of insoluble dietary fiber (Vitacel®) on growth performance and nutrient digestibility in weanling pigs. A total of 96 pigs that averaged 6.49$\pm$0.52kg BW and 23$\pm$2.1d age were allocated in a randomized block design with two pigs per pen and 12 pens per treatment. Pigs and feeders were weighed 10-days interval for the 40-d trials to determine ADG, ADFI and feed:gain ratio(F:G). Pigs were fed one of four diets:1) Control diet (C) 2) C+0.3% insoluble dietary fiber(IDF) 3) C+0.6% IDF and 4) c+0.9% IDF. For the determination of fecal nutrients digestibility, pigs were fed diets(diet 2) with 1% Celite-545(Fluka) as a marker and feces were collected on $9^{th}$ day and $18^{th}$ day after feeding diet 2. During the whole experimental period, pigs fed diet with 0.3% IDF have significantly higher ADG than other dietary treatment groups(P<0.05). ADG of pigs fed diet with 0.6% IDF was higher than that of pigs fed control diet(P<0.05). However, there was no significant difference in ADG between control group and 0.9% IDF group(P>0.05). ADFI of pigs fed diet with 0.3% IDF was significantly higher than any other dietary treatment groups(P<0.05). There was no significant difference in ADFI among control group, 0.6% and 0.9% IDF supplementation groups (P>0.05). Digestibilities of organic matter, crude protein, crude fiber and energy were significantly higher in 0.3% IDF supplementation group than any other dietary groups. However, there was no difference in over all nutrient digestibilities between 0.6% and 0.9% IDF group. Feeding diets more than 0.6% IDF did not affect the rest of the nutrients digestibilities except for ADF digestibility compared to control diet. Dietary supplementation level of IDF showed a significant quadratic effect on performance improvement of piglets. This response of growth performance to IDF supplementation is, as expected, in agreement with that of nutrient digestibility. Our results showed that IDF supplementation to diet for weaned piglets might be beneficial in terms of growth and nutrient digestibility. However, there should be more study on the relationship between level of IDF supplementation and piglet response as well as the exact mode of action of IDF in weaned piglets.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.3-17
• /
• 1994

The inhibitory effect of sodium ion on the anaerobic degradation of food waste was studied by an anaerobic batch toxicity assay and inhibition model. The anaerobic degradation activity of food waste spiked with over $2g\;Na^+/L$ of sodium ion was severely inhibited at the initial stage of the exposure. The inhibition response of anaerobic microorganisms on the sodium ion estimated from the methane production was differed according to the concentration of sodium ion. The relative acclimation time(RAT) and methanation rate(RMR), defined as the ratios of initial lag time and maximum methane production rate of the sample spiked with sodium ion to the control. respectively, were used to evaluate the acclimation and inhibitory effects quantitatively on the anaerobic microorganisms. When sodium ion was increased from $2g\;Na^+/L$ to $20g\;Na^+/L$, the RAT was exponentially increased from 18.9 to 90. but the RMR was linearly decreased from 0.97 to 0.02. The effects of sodium ion for the maximum methanation rate, first order kinetic constant and ultimate methane production were well evaluated by a generalized nonlinear expression model. it could be described by the uncompetitive inhibition mode. The sodium ion concentration causing 50% inhibition of methanation activity was about $11g\;Na^+/L$, and the critical sodium ion beyond to compelete inhibition was 20 to $21g\;Na^+/L$. The presented results could be used to obtain the design or operation parameters of the anaerobic process treating food waste of high salt.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.37-49
• /
• 1999

The effect of fire-retardant treatment and redrying on the mechanical properties of radiata pine sapwood were evaluated. Small, clear specimens were treated with three different fire-retardant(FR) chemicals, borax-boric acid(BRX), minalith(MIN), and pyresote(PYR), with target retentions of 30 and 60kg/$m^3$, and then redried at maximum dry-bulb temperature of $25^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ or $110^{\circ}C$. Each specimen, including untreated and water-treated controls, was tested in static bending and in compression parallel to grain. The extent of strength reduction was dependent on the type of FR chemicals, retention, and redrying temperature, and a highly significant interaction existed between FR treatment and redrying temperature. Modulus of rupture(MOR) and work to maximum load(WML) were significantly decreased by FR treatment and redrying. None of three FR chemicals adversely affect modulus of elasticity (MOE) and maximum crushing strength(MCS). MOE of BRX treatment and MCS of both BRX and PYR treatment increased significantly compared to untreated controls. No significant differences existed between retention levels except for MOE and MCS of some combinations of FR chemicals and redrying temperatures. Although MOE and MCS was not significantly affected by any of the redrying temperatures, these properties were generally decreased with the increase in redrying temperature. The significant reduction in MOR and WML was observed in BRX treatment when dried at temperatures of $60^{\circ}C$ and above, and in MIN and PYR treatment when dried at temperatures of $80^{\circ}C$ and above. Consequently, BRX-treated radiata pine should not be redried at temperatures >$60^{\circ}C$, and MIN- and PYR-treated radiata pine should not be redried at temperatures > $80^{\circ}C$ where bending strength and energy-related properties are important design considerations.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.3
• /
• pp.247-256
• /
• 2010

This experiment was carried out to investigate the effect of seeding rate of newly developed Italian ryegrass varieties, "Kogreen" and "Hwasan 101", on those seed production in Cheonan for three years (2005 to 2007). Two Italian ryegrass varieties were seeded at experimental fields of Grassland and Forage Division, National Institute of Animal Science on late September, and harvested at seed shattering stage. The experiment was arranged in randomized complete block design with three replications by each variety. The treatments was consisted of five seeding rates (5, 10, 20, 30, 40 kg/ha). The average heading date of "Kogreen" was 9 May and "Hwasan 101" was 25 May. The harvesting date of "Kogreen" was on 16 June when the rainy season should not set in. In the case of "Hwasan 101", the harvesting date of seed production was 3 July, because of rainy season. The number of ear per square meter, ear length, spikelet number, seed yield per ha and ripening rate of "Hwasan 101" were 471, 28.5 cm, 24.8, 1,631 kg and 71%, respectively. and those of "Kogreen" were 633, 24.0 cm, 20.8, 2,676 kg and 82.1%, respectively. The shattering property rate of "Hwasan 101" 40.3% was higher than that of "Kogreen" 2.6%. The germination rate of harvested "Hwasan 101" seed was 81.8% and that of "Kogreen" was 79.4%, respectively. In conclusion, the optimum seeding rate of Italian ryegrass for seed production are recommended 20kg/ha in both "Hwasan 101" and "Kogreen".

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.317-323
• /
• 2004

This study was carried out to determine the effect of seed method and seeding rate on the desirable agronomic characteristics and yield of forage barley(Hordeum vuigare) at paddy field, National Livestock Research Institute, RDA, Suwon from October 2001 to May 2003. The experiment was arranged in a spilt plot design with three replications. Main plots consisted of tow seed method; Broadcasting and drilling, Sub-plots consisted of seeding rates; 130. 160, 190 and 220 kg/ha. The results obtained were summarized as fellows ; The resistance of cold, disease and lodging of barley for the seeding method and seed rate were not different. And dry matter percentage of barley for a seeding method of 130 kg/ha at the broadcasting was the lowest of $32.0\%$, and that for the drilling at 130 kg/ha was $32.7\%(P<0.05). Fresh yield of barley for a seeding method of drilling at 130 kg/ha was the highest of 32,073 kg/ha, and that for a seeding method of broadcasting at 130 kg/ha was the lowest of 20,944 kg/ha(P<0.05). Dry matter yield of barley for a seeding method of drilling at 160 and 130 kg/ha were the highest 9,170 and 9,138 kg/ha, and that fur a seeding method of broadcasting at 130 kg/ha was the lowest of 5,710 kg/ha(P<0.05). Based on the results of this experiment, it appears that the seeding method and rate of barley could be enhanced by drilling from 130 to 160 kg/ha, and broadcasting from 190 to 220 kg/ha. respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.239-244
• /
• 2005

This study was conducted to investigate the effect of the planting densities and nitrogen levels on the growth characteristics, dry matter yield and nutritive value of corn for silage in alpine area(altitude 800m a.s.1.) of National Livestock Research Institute from 2001 to 2002. The experiment was arranged in a split plot design with three replications. Main plots consisted of three planting densities, low(67,000 plants/ha), medium(89,000 plants/ha) and high(95,000 plants/ha). Sub plots consisted of three nitrogen levels, 150 kg/ha, 200 kg/ha, and 250 kg/ha. Tassel height of corn was increased with decreasing planting density, and nitrogen level of 200 kg/ha in all main plots. Ear height of corn was decreased with increasing planting density, and 150 kg/ha of three nitrogen levels. But there were no significant differences among treatment in tassel and ear height. Although dry matter ear ratio of whole com was increased with decreasing planting density, there were no significant differences among treatments. But there were significant differences among nitrogen levels(P<0.05). Dry matter yield of com was high with increasing planting density, but there were no significant differences among treatments. And DM yield of corn was significant difference among nitrogen levels(P<0.05). Crude protein content of corn was the highest with high planting density and low nitrogen level. NDF and ADF content of com was the highest with low planting density and nitrogen levels of 200 kg/ha in all main treatments. These results indicate that low planting density(67.000 plants/ha) and nitrogen of 150-200 kg/ha would be the optimum level fur dry matter yield and nutritive value of silage com in alpine area.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.57-65
• /
• 2020

This study was conducted to investigate the effect of sowing and harvesting dates on agronomic characteristics and feed values of rye and triticale at Sanchoeng, South Korea. The experimental design consisted of the different sowing and harvesting dates as follows; rye (Secale cereale L., cv. Gogu) of sowing (October 15, 25, and November 5) in 2015 and harvesting (April 20, May 1 and May 11) in 2016, and triticale (X Triticosecale, cv. Joseong) of sowing (October 15, 25, and November 5) in 2015 and harvesting (May 18, 28, and June 7) in 2016. In rye, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. Crude protein (CP) content and relative feed value (RFV) decreased (p<0.05) with the delayed-harvesting date, but neutral detergent fiber (NDF) content increased (p<0.05). In triticale, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. The CP content decreased (p<0.05) with the delayed-harvesting date, but NDF content and RFV increased (p<0.05). This study concluded that rye sown in the middle of October then harvested in early May, and the triticale sown at the end of October then harvested at the end May are recommended to increase dry matter yield and feed value.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.119-126
• /
• 2011

The study was conducted to investigate the effects of dietary energy and protein levels on productivity and feed cost in crossbred chicks. Experiment was divided into starting (0~5 weeks), growing (6~10 weeks), and finishing (11~14 weeks) periods. Design of feeding trials was 3 ${\times}$ 3 factorial to feed different energy and protein levels for starting (ME 2,950, 3,000, and 3,050 kcal/kg CP 18, 19, and 20%), growing (ME 3,000, 3,050, and 3,100 kcal/kg CP 17, 18, and 19%) and finishing (ME 3,050, 3,100, and 3,150 kcal/kg CP 16, 17, and 18%) periods, respectively. In the starting period, weight gain and FCR was improved by dietary protein level (P<0.05). Interaction effect existed in feed intake and FCR (P<0.05). Weight gain was higher in 3,000 kcal/kg ME treatment than 3,100 kcal/kg ME treatment for growing period (P<0.05). In finishing period, feed intake was significantly decreased in ME 3,150 kcal/kg treatment than the other ME treatments (P<0.05). Feed cost/weight gain (FC/WG) was significantly decreased in chicks fed with 2,950 kcal/kg ME and 19% CP in starting period (P<0.05). For the growing period, FC/WG was notably increased in ME 3,000, 3,050 kcal/kg treatment than ME 3,100 kcal/kg treatment, and the FC/WG of CP 17, 18% treatment was significantly higher than CP 16% treatment (P<0.05). Thus, the optimum levels of ME and CP to improve the productivity and feed cost for starting, growing and finishing periods were 2,950 kcal/kg ME, 19% CP 3,000 kcal/kg ME, 18% CP and 3,100 kcal/kg ME, 17 or 16% CP, respectively.