• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.433-442
• /
• 2013

This study aimed to compare the dynamics of air temperature and velocity under two different ventilation and housing systems during summer and winter in Korea. The $NH_3$ concentration of both housing systems was also investigated in relation to the pig's growth. The ventilation systems used were; negative pressure type for the enclosed pig house (EPH) and natural airflow for the conventional pig house (CPH). Against a highly fluctuating outdoor temperature, the EPH was able to maintain a stable temperature at 24.8 to $29.1^{\circ}C$ during summer and 17.9 to $23.1^{\circ}C$ during winter whilst the CPH had a wider temperature variance during summer at 24.7 to $32.3^{\circ}C$. However, the temperature fluctuation of the CPH during winter was almost the same with that of EPH at 14.5 to $18.2^{\circ}C$. The NH3 levels in the CPH ranged from 9.31 to 16.9 mg/L during summer and 5.1 to 19.7 mg/L during winter whilst that of the EPH pig house was 7.9 to 16.1 mg/L and 3.7 to 9.6 mg/L during summer and winter, respectively. These values were less than the critical ammonia level for pigs with the EPH maintaining a lower level than the CPH in both winter and summer. The air velocity at pig nose level in the EPH during summer was 0.23 m/s, enough to provide comfort because of the unique design of the inlet feature. However, no air movement was observed in almost all the lower portions of the CPH during winter because of the absence of an inlet feature. There was a significant improvement in weight gain and feed intake of pigs reared in the EPH compared to the CPH (p<0.05). These findings proved that despite the difference in the housing systems, a stable indoor temperature was necessary to minimize the impact of an avoidable and highly fluctuating outdoor temperature. The EPH consistently maintained an effective indoor airspeed irrespective of season; however the CPH had defective and stagnant air at pig nose level during winter. Characteristics of airflow direction and pattern were consistent relative to housing system during both summer and winter but not of airspeed. The ideal air velocity measurement favored the EPH and therefore can be appropriate for the Korean environment. Further emphasis on its cost effectiveness will be the subject of future investigations.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.360-366
• /
• 2012

In the power distribution panel installed in airport or industrial facilities, MCCB has been used for main switch and ELCB for branch switch to perform human body and leakage-inducing fire protection as well as overcurrent and short circuit protection. Especially for the airport panel, increase in accident protection is needed for stable power supply due to rapid modernization with fast-growing users, higer capacity and diversification of equipment, the increase of power capacity and the breaker made slim is a main issue for now because the issue for installation space is standing out by making panel with two-row arrangement connection method, etc. due to a many use of branch ELCBs. In this thesis, we designed arc extinguishing mechanism, considered movement direction change of contact in mechanism design. Also, we designed the breaker to work stably in case of miniaturization of leakage detection circuit and reverse connection. We conducted short circuit test to verify its function and developed the breaker that can be improved protection against accidental current with slim size operating leakage function when reverse connection to help solve the problem in using space that is increasing in the airport distribution panel.

• The Research Journal of the Costume Culture
• /
• v.15 no.1 s.66
• /
• pp.37-57
• /
• 2007

The purpose of this study was to analyze the body measurements of boys and girls at puberty and to provide the fundamental data for pubescent apparel manufacturers to produce clothing that reflect their physical characteristics. A total of 549 boys and 529 girls aged between 10 and 14 were measured in the capital area from March 4 to April 3, 2004. Data were collected from 35 anthropometric items and 12 photographic items per a person. SPSS Ver. 12 program was used in data analysis including means, standard deviation, t-test and Duncan test. The main results of this study were as follows. They showed the significant difference of their growth in accordance with the increase of their ages. There were also the difference between boys and girls. As for height and length items, boys showed a slow growth at the age of $10{\sim}11\;and\;12{\sim}13$. Those at the age of $11{\sim}12\;and\;13{\sim}14$ showed rapid growth. That is, an active growth was followed by a slow growth and that phenomenon repeatedly occurred. On the other hand, girls showed remarkable growth at the age $10{\sim}11$ and the growth rate gradually slowed down afterward. Regarding circumference items, boys at the age of $11{\sim}12\;and\;13{\sim}14$ showed remarkable growth. This results showed that boys at the age of $11{\sim}12$ had vertical growth and horizontal growth at the same time and for those at the age of $13{\sim}14$, growth was more conspicuous in horizontal direction. Meanwhile, for girls, the growth rate was high at the age of $11{\sim}12$, somewhat later than the age of the growth of height and length. As for breadth-related items and depth-related items, for both sexes two items grew steadily throughout the ages, breadth-related items showed a higher growth rate than that of depth-related items. This study analyzed the body measurements of pubescent boys and girls and the results showed that, for boys, an active physical growth took place at the age of 13 according to previous studies, but the findings of this study suggested that the phenomenon now occurred at the age of $11{\sim}12$, which proved that physical growth took place earlier than before. Also, an active growth was followed by a slow growth. Girls at puberty showed remarkable growth of height at the age of $10{\sim}11$ that is consistent with previous studies and then showed horizontal growth at the age of around 12, having a voluminous body shape.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.45-53
• /
• 2010

This paper has attempted to propose a more progressive direction for U-environmental sculptures in a ubiquitous urban space in terms of usability, service, function and formative characteristics that enhance user satisfaction with these sculptures. For this, Media Pole, a U-environmental sculpture on Gangnam U-Street, has been examined. The results of this study are as follows: First, a study of user satisfaction was planned after establishing levels of satisfaction in terms of service, function and formative characteristics. In terms of satisfaction by the section of Media Pole, the public transportation map was the most influential in service while street culture and beauty of shape were critical in function and formative characteristics, respectively. In the relationship between satisfaction by section and overall satisfaction, furthermore, functional satisfaction had the biggest influence. Therefore, the development of human-centered functional factors which have pleasant and touching stories to facilitate communication with citizens are important in order to develop various Media Pole contents to enhance user satisfaction with the U-environmental sculpture and allow it evolve into a Gangnam landmark Since we are in the initial stage of a U-city, there are many problems that need to be addressed such as a lack of natural beauty, poor material quality of environmental sculptures, absence of storytelling, poor technology, lack of content, poor profitability and lack of means of social communication. In the end, the development of a comfortable, people-friendly space and U-environmental sculptures are needed in consideration of economic, social and cultural aspects instead of focusing on advanced technology only.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.199-208
• /
• 2013

The purpose of this study is to compare the vegetation structure in complementary forests of villages between Korea and China. For this study, Jinan in Korea and Qingzhou in China were selected through a pre-survey about the representative regions of both countries. The main research method used was field study. A comparative analysis between the two regions was performed by a frequency analysis of the surveyed data. The data obtained in the study shows the vegetation structure in complementary forests of villages in the two regions have many differences which are related to the local culture. As a result, it was identified that the average number of species was the same at 2.9 and the average number of trees, total number of trees, and tree density in Qingzhou were considerably greater than those in Jinan. Also, it was identified that tree height, average breadth height diameter and crown width in Jinan were considerably greater than those in Qingzhou. Furthermore, it was identified that both the forest state and the principal species of tree are both very different according to the different cultures. Through this identification, it is considered that this study will be helpful in establishing policy direction in both countries about the restoration and management of complementary forests.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.473-479
• /
• 2002

The estimation of the volume of a pit excavation is often required in many surveying, soil mechanics, highway applications and transportation engineering situations. The calculation of earthwork plays a major role in plan or design of many civil engineering projects such as seashore reclamation, and thus it has become very important to improve the accuracy of earthwork calculation. In this paper the spot height method, proposed formulas(A, B, C), and chen and Line method are compared with the volumes of the pits in these examples. And we proposed an algorithm of finding a terrain surface with the free boundary conditions and both direction spline method drawback, i.e., the modeling curves form peak points at the joints. To avoid this drawback, the cubic spline polynomial was chosen as the methematical model of the new method. From the characteristics of the cubic spline polynomial, the modeling curve of the new method was smooth and matched the ground profile well. As a result of this study, algorithm of proposed three methods to estimate pit excavation volume provided a better accuracy than spot height, chamber, chen and Lin method. And the mathematical model mentioned makes is thought to give a maximum acccuracy in estimating the volume of a pit excavation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.327.1-327.1
• /
• 2014

Nitrides-on-silicon structures are considered to be an excellent candidate for unique design architectures and creating devices for high-power applications. Therefore, a lot of effort has been concentrating on growing high-quality III-nitrides on Si substrates, mostly Si(111) and Si(001) substrates. However, there are several fundamental problems in the growth of nitride compound semiconductors on silicon. First, the large difference in lattice constants and thermal expansion coefficients will lead to misfit dislocation and stress in the epitaxial films. Second, the growth of polar compounds on a non-polar substrate can lead to antiphase domains or other defective structures. Even though the lattice mismatches are reached to 16.9 % to GaN and 19 % to AlN and a number of dislocations are originated, Si(111) has been selected as the substrate for the epitaxial growth of nitrides because it is always favored due to its three-fold symmetry at the surface, which gives a good rotational matching for the six-fold symmetry of the wurtzite structure of nitrides. Also, Si(001) has been used for the growth of nitrides due to a possible integration of nitride devices with silicon technology despite a four-fold symmetry and a surface reconstruction. Moreover, Si(110), one of surface orientations used in the silicon technology, begins to attract attention as a substrate for the epitaxial growth of nitrides due to an interesting interface structure. In this system, the close lattice match along the [-1100]AlN/[001]Si direction promotes the faster growth along a particular crystal orientation. However, there are insufficient until now on the studies for the growth of nitride compound semiconductors on Si(110) substrate from a microstructural point of view. In this work, the microstructural properties of nitride thin layers grown on Si(110) have been characterized using various TEM techniques. The main purpose of this study was to understand the atomic structure and the strain behavior of III-nitrides grown on Si(110) substrate by molecular beam epitaxy (MBE). Insight gained at the microscopic level regarding how thin layer grows at the interface is essential for the growth of high quality thin films for various applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.299-306
• /
• 2016

In this paper, a method of shape prediction of an endoscope handling robot that can imitate a surgeon's behavior using a sensor network is suggested. Unit sensors, which are composed of a 3-axis magnetometer and 3-axis accelerometer pair comprise the network through CAN bus communication. Each unit of the sensor is used to detect the angle of the points in the longitudinal direction of the robot, which is made from a flexible tube. The signals received from the sensor network were filtered using a low pass Butterworth filter. Here, a Butterworth filter was designed for noise removal. Finally, the Euler angles were extracted from the signals, in which the noise was filtered by the low path Butterworth filter. Using this Euler angle, the position of each sensor on the sensor network is estimated. The robot body was assumed to consist of links and joints. The position of each sensor can be assumed to be attached to the center of each link. The position of each link was determined using the Euler angle and kinematics equation. The interpolation was carried out between the positions of the sensors to be able to connect each point smoothly and obtain the final posture of the endoscope in operation. The experimental results showed that the shape of the colonoscope can be visualized using the Euler angles evaluated from the sensor network suggested and the shape of serial link estimated from the kinematics chain model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2639-2644
• /
• 2013

The renewal cycle, which newly decorates stores, has been shortened, as the marketing competition between telecommunication companies has been extended to the stores, due to the rapid increase of mobile phone users and fast replacement cycle of products. The store renewal made by major telecommunication companies, including signboard, has been pushed in order for telecommunication companies to give strong impression about their own brand identity to consumers. Consumers want stores not only to sell cheap and high quality products but also to provide customer experience, by which customers can feel store, product and service and accept them. Especially, since the competition between telecommunication companies is getting tough, it is the current trend that the number of stores is increasing much, and telecommunication companies are recently renewing their stores, with the concept of SI(Store Identity), which changes store image into the incorporated image including interior and exterior, rather than just replacing CI(Corporate Identity), when they renew stores. It can be said that SI(Store Identity) is an important factor, by which companies consistently design visual factors such as interior and sign, and then apply them to the interior and exterior of the stores, and thereby give good store image to consumers, and ultimately have great effect on the increase of sales volume. This kind of activity can be image-controlled by companies' Identity Management, and it can be a very important factor in terms of marketing. In this study, it has an objective to compare and analyze SI of domestic telecommunication companies and foreign telecommunication companies, and then suggest effective SI direction.