• 품질경영학회지
• /
• 제34권1호
• /
• pp.48-53
• /
• 2006

Applying Bayesian optimal design principles is not easy when a prior distribution is not certain. We present a optimal design criterion which possibly yield a reasonably good design and also robust with respect to misspecification of the prior distributions. The criterion is applied to the problem of estimating the turning point of a quadratic regression. Exact mathematical results are presented under certain conditions on prior distributions. Computational results are given for some cases not satisfying our conditions.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제8권1호
• /
• pp.61-67
• /
• 2002

It is the well-documented fact that most patients experience considerable stress in hospital. Stress is also a problem for families of patients, visitors and for hospital staffs. To promote wellness. It is fundamentally important that hospital be designed to foster copying with stress. By Literature review, this study presents stressors of patients, families, hospital staffs and various healing design elements. And then, it cross-checks the relations between stress-reducing conditions and healing design elements. Finally, this presents the healing design conditions for each stress-reducing conditions of patients, families and staffs.

• 동력기계공학회지
• /
• 제9권3호
• /
• pp.39-43
• /
• 2005

Among many other alternative energy resources, small scale hydropower has been brought into attention as a reliable source of energy today, which had been relatively neglected since 1960s. Present low head of Francis turbines and small scale hydroturbines, however, have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develope the Francis turbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could alleviated and competition with other alternative energy sources in the changable design conditions could attained. The Francis turbine of a new concept was designed based on changable design conditions, hydrodynamics and theory of power transmission. The result of the study shows that two stages runner is more efficient, cheaper in construction, faster responding, and easier maintaining than single stage runner of Francis turbine

• 호남수학학술지
• /
• 제24권1호
• /
• pp.109-119
• /
• 2002

Some sufficient conditions on the existence and uniqueness of certain symmetric balanced incomplete block design are introduced. Also, a construction algorithm for the design and some examples are presented. The algorithm is developed based on the construction of subspaces of the three-dimensional vector space over a field.

• 소성∙가공
• /
• 제12권2호
• /
• pp.116-122
• /
• 2003

In the Prestressed die design for cold working, many constraining conditions should be considered to insure the die safety and to improve the dimension accountancy products. Among the constraining conditions, yielding conditions, diameter ratios and interferences between rings are very important. . In this paper, therefore, flexible tolerance method was used in order to search the optimum values of design variables. The maximum inner pressure is used as objective function in this numerical analysis. In the design Process, it was also involved the safety factor to the yield strength of each ring by considering the allowable tensile or compressive hoop stress in each ring. The proposed technique has been applied to the die design of backward extrusion process, and it's analytical results have been compared with that of the conventional design method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.117-124
• /
• 2000

This paper presents the construction planning and the detail design of a 16.2 km long railroad tunnel in a mountainous area. Major design conditions for railroad are the single track, loop-typed alinement, and a maximum grade of 24.5$\textperthousand$. A underground station(double track) with a length of 1.1km is located in the middle of the line for train cross-passing. Tunnel is excavated in highly complex geological conditions including faulted areas, abandoned mine works areas, and various rock types such as sandstone, shale, limestone, and coal seam partly. Drilling and blasting method was adopted because it is more flexible than TBM(Tunnel Boring Machine) as a result of risk assessment for geological conditions in this area. Two working adits were planned to adjust the construction schedule and can be used for ventilation and maintenance in operation phase. New material and concept were introduced to the tunnel drain design. They are expected to improve tunnel drain condition and capability. Rational tunnel support design was tried to consider the various tunnel size and purpose and to use the geological investigation results.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.30-35
• /
• 2020

Plastic pulleys used for the purpose of power transmission have to very high roundness characteristics. The roundness of plastic pulleys is influenced by many factors. In this study, the effect of molding conditions on the roundness of pulleys was analyzed using a numerical analysis program. To improve the roundness, molding conditions that minimize the amount of deformation of the pulley were studied through an experimental design method. Among the experimental design methods, the Taguchi method was used, and the main molding conditions affecting the deformation of the pulley were the resin temperature and the holding pressure. It was found that the amount of deformation is reduced by about 2.86% when molding with the optimum molding conditions compared to when the optimum molding conditions are not applied.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.453-466
• /
• 2015

Purpose: The purpose of this study is to design a systematic method to estimate optimal operation conditions of design variables for an electronic device alignment system. Method: The 2-level factorial design and the central composite design are used in order to plan experiments. Based on the experiment results, a regression model is established to find optimal conditions for the design variables. Results: 3 of 5 design variables are selected as major factors that affect the alignment system significantly. The optimized condition for each variable is estimated by using a sequential experiment plan and a quadratic regression model. Conclusion: The method designed in this study provides an efficient and systematic plan to select the optimized operation condition for the design variables. The method is expected to improve inspection accuracy of the system and reduce the development cost and period.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1549-1554
• /
• 2018

Recently the design of railway systems have been performed, based on the analysis of operational conditions and service targets, it is to optimize the effectiveness and efficiency of system operation. Many RAMS requirements have been developed to transform operation conditions into system design characteristics. However, our railway industry has not actived the application of RAMS into system design performance. According to short of RAMS application, many technologies that have been developed are not only applied the existing systems that is operating, but also have not succeed to apply for new systems. In order to design the effective and efficient railway systems that are optimized to operation conditions and service targets, a systems approach and RAMS management are necessary in railway development, operation and maintenance. Therefore, in this study, the RAMS performance requirement design methods are discussed. the allocation methods from system level to each devices of subsystems.

• 한국생활과학회지
• /
• 제19권6호
• /
• pp.1127-1137
• /
• 2010

This study explored ways of changing a detached house which has older residents to a universal design home. This study investigated the residential conditions based on the universal design features and the need of universal design for aging in place. For this study, 153 residents who were living in single detached houses in Columbia, MO, were surveyed using written questionnaires and interviews. Primary findings of residential conditions were showed according to each spaces such as entrance, interior hallway, master bedroom, bathroom and kitchen. The major results are as follows: 1)It was confirmed that major spaces for daily living such as a bedroom, bathroom, kitchen and laundry facilities needed to be on the ground floor. 2)The most dangerous spaces in house were stairs to the upper or lower floors and the bathroom, 3)The need for modification based on universal design were high in order to facilitate aging in place. 4) Finally, elderly people in their seventies had especially strong needs through modification compared to the elderly people in their sixties who had plans to relocate.