• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2479-2485
• /
• 2013

In this paper, we present a design for solid-state radar SSPA with sequential bias. We apply to variable extension pulse generator to eliminate signal distortion which is caused by bias rising/falling delay of power amplifier. There is an optimum impedance matching circuit to have high efficiency of GaN-power device by measuring microwave characteristics through load-pull method. The designed SSPA is consisted of pre-amplifier, drive-amplifier and main-amplifier as a three stages to apply for X-Band solid-state radar. Thereby we made a 200W SSPA which has output pulse maximum power shows 53.67dBm and its average power is 52.85dBm. The optimum design of transceiver module for solid-state pulse compression radar which is presented in this dissertation, it can be available to miniaturize and to improve the radar performances through additional research for digital radar from now on.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.2
• /
• pp.53-61
• /
• 2021

The properties of tetrahedral amorphous Carbon (ta-C) film can be determined by multiple parameters and comprehensive effects of those parameters during a deposition process with filtered cathodic vacuum arc (FCVA). In this study, Taguchi method was adopted to design the optimized FCVA deposition process of ta-C for improving deposition efficiency and mechanical properties of the deposited ta-C thin film. The influence and contribution of variables, such as arc current, substrate bias voltage, frequency, and duty cycle, on the properties of ta-C were investigated in terms of deposition efficiency and mechanical properties. It was revealed that the deposition rate was linearly increased following the increasing arc current (around 10 nm/min @ 60 A and 17 nm/min @ 100A). The hardness and I_D/I_G showed a correlation with substrate bias voltage (over 30 GPa @ 50 V and under 30 GPa @ 250 V). The scratch tests were conducted to specify the effect of each parameter on the resistance to plastic deformation of films. The analysis on variances showed that the arc current and substrate bias voltage were the most effective controlling parameters influencing properties of ta-C films. The optimized parameters were extracted for the target applications in various industrial fields.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.2
• /
• pp.231-242
• /
• 2023

Purpose : This study aimed to identify ways to improve the quality of physical therapy research and ultimately review the current situation to improve evidence-based decision-making in physical therapy. Methods : For better evidence-based decision-making in physical therapy, researchers should review the quality assessment of articles in more detail and report their findings for valid and appropriate level of evidence and strength of recommendations. The level of evidence affects how well the findings are derived from well-designed literature. The evaluation of the evidence focuses primarily on the study design and the degree of bias that may compromise the validity of the findings. The final recommendation is based on a combination of the study design and literature quality. To uncover gems of information in each paper, a risk of bias assessment should be performed after the literature has been initially selected. Results : Researchers should consider the complexity of the intervention, appropriate grouping, and calculation of effect sizes for the intervention. Researchers conducting systematic reviews should provide a detailed description of the quality assessment performed and present a detailed analysis of their interpretation of the results. The results of systematic reviews and meta-analyses should be interpreted with caution and include a risk of bias assessment. Guidelines for the level of evidence and strength of recommendations should be developed and utilized more broadly to improve reporting practices in physical therapy. Conclusion : Researchers should be knowledgeable about the strengths and limitations of each study design and methodology. In the future, researchers will also need to improve their ability to critically evaluate their findings, given the potential for their results to influence clinical practice.

• Wind and Structures
• /
• v.19 no.3
• /
• pp.271-294
• /
• 2014

The impact of artefacts in archived wind observations on the design wind speed obtained by extreme value analysis is demonstrated using case studies. A signpost protocol for detecting candidate artefacts is described and its performance assessed by comparing results against previously validated data. The protocol targets artefacts by exploiting the serial correlation between observations. Additional "sieve" algorithms are proposed to identify types of correctable artefact from their "signature" in the data. In extreme value analysis, artefacts displace valid observations only when they are larger, hence always increase the design wind speed. Care must be taken not identify large valid values as artefacts, since their removal will tend to underestimate the design wind speed.

• Journal of the Korean Statistical Society
• /
• v.20 no.2
• /
• pp.147-155
• /
• 1991

This paper treats a robust design criterion which minimizes the effects of outliers and model inadequacy, and investigates robust designs for some response surface designs. In order to develop a robust design criterion and robust design, the integrated mean squared error of *(equation omitted) over a region is utilized, where *(equation omitted). is the estimated response by the minimum bias estimation proposed by carson, Manson and Hader (1969) . According to the number of aberrant observations and their positions, the proposed criterion and designs are studied. Also further development of the proposed criterion is treated when outliers can occur in any position of a design.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.15-21
• /
• 2010

A differential case equipped with LSD(limited slip differential) has several advantages over a normal type for rear wheel drive vehicles. Specially, the torque distribution can be done between left and right drive wheel in the state of limited slip differential. Also although LSD types are very various according to operating type, medium and torque distribution, a multi-clutch type is generally applied to rear wheel drive vehicles. So, this study presents the analysis of design parameters for development of a friction plate for multi-clutch type LSD using vehicle road test, the simulation of analytical model and the development of vehicle dynamics model by a benchmark product. According to this investigation, the design parameters which are pre-load of coil spring, friction plate and contact area quantity, friction coefficient and TBR(torque bias ratio) for a friction plate are derived from experiment and simulation and consequently, vehicle dynamics model has been constructed for the development of friction plate for multi-clutch type LSD.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.31-32
• /
• 2012

This paper presents a new design of magnetic bearing structure for application in Nuclear Power Plant (NPP). The proposed design includes so-called saturated coils which is used to generate the bias flux for bearing almost the whole mass of the rotor, and so-called linear auxiliary coil controlled to stabilize the suspension. The saturated coil is considered as an special electromagnet which is controlled to operate in the region of magnetic saturation in order to minimize the bias current as well as to enhance the magnetic flux density. This strategy will result in a very compact size of magnetic bearing as well as increasing the speed of the response of the current controller. The novel structure is expected to be applied to design very high power gas turbine generator of next generation of fast reactor in which the mass of rotor can reach 50 tons. The total power of the NPP can reach 2,000 MW. Moreover, the issue of arc occurrence between coils is also discussed and two solutions are proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.63-68
• /
• 2004

This paper presents a design of 12㎓ VCBRO(voltage controlled dielectric resonator oscillator) using a novel PBG(photonic band gap) ground plane and a varactor circuit that enhances the frequency linearity of VCO with different bias to varactors. The PBG structures are used for suppressing the second and third harmonics without any filters. To simulate the accurate resonating frequency, a DR coupled with microstrip lines is analysed by FTM(finite element method) simulation, and the results are transformed into scattering parameters to design the VCO. Some measured results are presented to show the usefulness of the proposed techniques.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.88-95
• /
• 2015

This paper considers the effects of propellant mixture ratio and loading errors on the performance of a liquid rocket. Propellant residuals generated by error sources are analyzed for a launch vehicle model whose first stage consists of a cluster rocket of four 75-tonf class engines using a statistical Monte-Carlo approach and then the optimal fuel biases minimizing residuals are computed. The results are validated through comparison with analytic method using approximate formula, which have been applied for other space launch vehicles.

• Journal of the Korean Statistical Society
• /
• v.14 no.1
• /
• pp.48-55
• /
• 1985

In clinical trials subjects are avalible sequentially and must be assigned to treatments immediately. Completely randomized procedure for the allocation of treatments to each subject may result in severe imbalance among the number of subjects in treatment groups, especially for small experiments or interim analyses of large experiments. In this study, restricted randomization methods such as biased coin designs (Efron, 1971), permuted block design, and truncated binomial design are compared to teh completely randomized design in the presence of selection and/or accidential bias by Monte Carlo simulations.