• Journal of The Korean Association For Science Education
• /
• v.23 no.1
• /
• pp.35-46
• /
• 2003

Problem solving ability, having been thought as one of the most important goals of science education is also a primary task for the current education. Indeed, the students' problem solving ability has shown almost no actual progress, despite our long accumulated science education. Under this circumstances, cooperative learning, a way to grow students' positive inter-dependence and problem solving ability in the basis of their active participation and discussion, was proposed as an effective teaching method. But, results have not consistently shown the advantage of cooperative learning over traditional learning for promoting academic achievement in science. Studies have consistently shown greater effectiveness on affective aspects. But, relatively few have focused on biology in Korea. The purpose of this study was to examine the effects of cooperative learning on the achievement and attitude of high school biology students. The pretest-posttest control group design was applied. The sample consisted of 50 11th-grade female students in experimental group(cooperative learning Student Team Achievement Division model) and 50 students in control group(traditional learning). Students in both groups recieved identical content instruction on the unit 'II. Methabolism'. These groups were treated for 13 hours during 5 weeks. Achievement data were collected using a 24-item multiple-choice test(content validity= .85). Science attitude was measured by an instrument which adapted by Kim In Hee(1994). The instrument(Cronbach $\alpha$=.89) included 40 items in four subscales: attitude toward science, social meaning of science, attitude toward science class, and scientific attitude. An analysis of covariance (ANCOVA) was used as the data analysis procedure. For the achievement data, no significant difference exists between the cooperative and traditional groups (p> .05). But, cooperative learning was effective in low-ability students(p < .05). For the science learning attitude data, cooperative learning was more effective than the traditional one(p< .05). Students in the cooperative group acheived better than those in traditional one especially in the subscale of attitude toward science class. There was no meaningful difference of the two methods in both high and average ability students, while cooperative learning was more effective than the traditional one in low ability students(p<.05).

• Journal of The Korean Association For Science Education
• /
• v.35 no.5
• /
• pp.805-815
• /
• 2015

The Korean education curriculum is making efforts to improve education to foster competencies that the future society demands through the 2007 and 2009 revised curriculum. The revised curricula focus on enhanced articulation for the quality curriculum. In this study, the curriculum is analyzed for vertical and horizontal articulation. In addition, the study found a problem in Korea's curriculum through international comparison and sought improvement. Furthermore, the study compared internationally articulation of the concept of photosynthesis, of which the results are as follows. First, our science curriculum focuses on vertical articulation and has relatively neglected the problem of horizontal articulation. To compensate for this problem, curriculum design should introduce aspects of 'nature' and 'environment' and should consider the interests and concerns of students, as countries with high horizontal articulation do. Second, the actual education field has a problem with the a lack of continuity and sequence because of concentration of concept in a specific grade or simply repeating the concept across multiple grades. These results have led to alternative proposals that should arrange basis of concept configuration such as 'Big Idea' and should establish the adoption of 'systems' frequently appearing in the other curricula. Finally, there may be mentioned a lack of research on students' learning progression, which can be a common standard of horizontal and vertical articulation. Research on learning progression has been a trend overseas, but there exists no study to fit Korea's situation, so education fields need to conduct the appropriate research on learning progression as part of the commitment to high-quality curriculum.

• Journal of The Korean Association For Science Education
• /
• v.36 no.4
• /
• pp.539-550
• /
• 2016

The purpose of the study is to conceptualize SSI-PCK by identifying major components and sub-components to promote science teachers' confidence and knowledge on teaching SSIs. To achieve this, I conducted extensive literature reviews on teachers' perceptions on SSI, case studies of teachers addressing SSIs, SSI instructional strategies, etc. as well as PCK. Results indicate that SSI-PCK include six major components: 1) Orientation for Teaching SSI (OTS), 2) Knowledge of Instructional Strategies for Teaching SSI (KIS), 3) Knowledge of Curriculum (KC), 4) Knowledge of Students' SSI Learning (KSL), 5) Knowledge of Assessment in SSI Learning (KAS), and 6) Knowledge of Learning Contexts (KLC). OTS refers to teachers' instructional goals and intentions for teaching SSIs. Teachers often present a) activity-driven, b) knowledge and higher order thinking skills, c) application of science in everyday life, d) nature of science and technology, e) citizenship and f) activism orientations for teaching SSIs. KIS indicates teachers' instructional knowledge required for effectively designing and implementing SSI lessons. It includes a) SSI lesson design, b) utilizing progressive instructional strategies, and c) constructing collaborative classroom cultures. KC refers to teachers' knowledge on a) connection to science curriculum (horizontal/vertical) and b) connection to other subject matters. KSL refers to teachers' knowledge on a) learner experiences in SSI learning, b) difficulties in SSI learning, and c) SSI reasoning patterns. KAS indicates teachers' knowledge on a) dimensions of SSI learning to assess, and b) methods of assessing SSI learning. Finally, KLC refers to teachers' knowledge on the cultures of a) classrooms, b) schools, and c) community and society where they are located when teaching SSIs.

• Child Health Nursing Research
• /
• v.19 no.2
• /
• pp.85-93
• /
• 2013

Purpose: The study purposes were to describe the process of developing the Korean versions of the Six Dimension Scale of Nursing Performance (Six-D) and Student Nurse Stress Index (SNSI) and psychometric evaluation of the two measurements. Methods: This was a methodology study using a descriptive cross-sectional design with 51 nursing students in 4th year of university. Internal consistency reliability was assessed using Cronbach alphas. Construct validity was determined by exploring correlations among Six-D, SNSI, objective structured clinical examination (OSCE), self-efficacy and grade point average (GPA). Results: Internal consistency reliability of Six-D and SNSI was acceptable with Cronbach's ${\alpha}$ of .95 and .82. Correlation analysis to determine construct validity revealed that Six-D presented positive correlations with OSCE (r=.109~.272) and self-efficacy (r=.005~.161) and negative correlation with GPA (r=-.246~-.394), although all were not statistically significant. SNSI presented all negative correlations with OSCE (r= -.007~-.238), self-efficacy (r=-.246~-.394), and GPA (r=-.092~-.426) and were mostly statistically significant except OSCE. Conclusion: Six-D needs more evidence to confirm validity to predict observed clinical competency and theoretical relationships with self-efficacy and GPA. However, SNSI presented trends of expected relationships with relevant variables. Therefore, further research is recommended in testing validity of Six-D with other student populations.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.179-195
• /
• 2010

In the internal connection system, the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. The purpose of this study was to assess the loading distributing characteristics of three different abutments for GS II$^{(R)}$ implant fixture(Osstem, Korea) under vertical and inclined loading using finite element analysis. Three finite element models were designed according to three abutments; 2-piece Transfer$^{TM}$ abutment made of pure titanium(GST), 2-piece GoldCast$^{TM}$ abutment made of gold alloy(GSG), 3-piece Convertible$^{TM}$ abutment with external connection(GSC). This study simulated loads of 100N in a vertical direction on the central pit(load 1), on the buccal cusp tip(load 2) and $30^{\circ}$ inward inclined direction on the central pit(load 3), and on the buccal cusp tip(load 4). The following results were obtained. 1. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture and lower stress was taken at the cancellous bone. 2. When off-axis loading was applied, high stress concentration observed in cervical area. 3. GSG showed even stress distribution in crown, abutment and fixture. GST showed high stress concentration in fixture and abutment screw. GSC showed high stress concentration in fixture and abutment. 4. Maximum von Mises stress in the surrounding bone had no difference among three abutment type. In GS II$^{(R)}$ conical implant system, different stress distribution pattern was showed according to the abutment type and the stress-induced pattern at the supporting bone according to the abutment type had no difference among them.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.3-36
• /
• 2015

As of end of 2014, the population engaging in aviation activities for leisure has reached approximately 13 million, where approximately 356 cases involve a general aircraft, 200 cases involve light aircraft, and 636 cases involve an ULM. The industry for leisure has become a very promising industry in line with rapidly rising living standards which are expected to further increase in the future. The demand for such services is expected to increase over time. The purpose of this paper is to review the development and site selection of airfields in anticipation of these developments in the industry. While the government also has experience in the review of airfield location and candidate sites, it is not the government that carries out the actual construction. As such, the feasibility of the site needs to be verified in terms of actual construction. This study identified factors for Site Selection of factors through a review of related documents and existing research reports. A questionnaire was also used to collect the views of experts in the field, which was then analyzed. The Research model was confirmed in the layered form for an AHP analysis. The factors for Site Selection were identified as the technical / operational factors and economic / political elements for a two-stage configuration. The third step consisted of technical and operational elements. The final step is was constructed a total of 11 elements (weather, surface conditions, obstacle limitation surface, airspace conditions, operating procedures, noise problems, environmental issues, availability of facilities, construction and investment costs, contribution to the local economy, accessibility, demand / the proximity of demand). The surveys are conducted for more than 10 General and light aircraft pilots, professionals, and instructor. The analysis results showed a higher level in the technical / operating elements (73.2%) in the first step, while the next step sawa higher level of the operational elements (30.9%) than the other. The factors for Site Selection were any particular elements did not appear high, the weather conditions (17.5%), noise problems (19.8%), the proximity of demand (6%), accessibility (5.7%), environmental issues (11.1%), availability of facilities (8%), airspace conditions (7.9%), obstacle limitation surface (12%), construction and investment costs (4.2%) and to operating procedures (4.9%), contribution to the local economy (3.8%).

• Korean Journal of Social Welfare
• /
• v.58 no.2
• /
• pp.273-302
• /
• 2006

The introduction of cash payments for care is a distinct trend that characterizes changes in care policies since the 1990s. Recently, many developed countries have newly introduced or extended cash payments for care that allow care users to be able to plan themselves for their cares instead of receiving direct care services from the state. Cash payments for care can be said to be one of the alternative policies by which user choices are extended, and it becomes possible to establish demand-cantered care delivery systems more economically and effectively, hence addressing the issue of the financial limitations and rigid systems that are common in modern welfare states, which make it difficult to response to various needs. However, the design and administration of cash for care vary across different countries. Such variations of cash for care policies influence on the combination of consumerism (based on liberal market values intrinsic in the care market) and citizenship based on social solidarity. Those variations eventually produce impacts on the balance of responsibilities and the roles of families, the state and market regarding care in other words, balancing of welfare pluralism. This paper has attempted to find general meanings and particularity of cash for care polices in modem welfare states by means of looking at the characteristics of cash for care policies of four different countries (Netherlands, France, Germany and Italy) and their impacts on their care market. If the four countries are ranked by the degree that they emphasize citizenship in light with social rights, the Netherlands, France, Germany and Italy could be placed in due order. From an economic point of view and in terms of cost containment, those countries will be placed in an inverse order, It is apparent that in the course of planting cash for care policies in the existing social systems involving different socio-cultural conditions and labour markets, sometimes more emphasis is placed on the citizenship of care users, family carers and care providers than on cost containment issue, and sometimes vice versa. Behind this lies the process of different social valuation on what care is about; who can better deliver care; who should be responsible for care; how responsibilities should be shared and so on.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.248-256
• /
• 2007

In this paper, we propose a selective DFT spreading method to solve a high PAPR problem in uplink OFDMA system. A selective characteristic is added to the DFT spreading, so the DFT spreading method is mixed with SLM method. However, to minimize increment of computational complexity, differently with common SLM method, our proposed method uses only one DFT spreading block. After DFT, several copy branches are generated by multiplying with each different matrix. This matrix is obtained by linear transforming the each phase rotation in front of DFT block. And it has very lower computational complexity than one DFT process. For simulation, we suppose that the 512 point IFFT is used, the number of effective sub-carrier is 300, the number of allowed sub-carrier to each user's is 1/4 and 1/3 and QPSK modulation is used. From the simulation result, when the number of copy branch is 4, our proposed method has more than about 5.2 dB PAPR reduction effect. It is about 1.8 dB better than common DFT spreading method and 0.95 dB better than common SLM which uses 32 copy branches. And also, when the number of copy branch is 2, it is better than SLM using 32 copy branches. From the comparison, the proposed method has 91.79 % lower complexity than SLM using 32 copy branches in similar PAPR reduction performance. So, we can find a very good performance of our proposed method. Also, we can expect the similar performance when all number of sub-carrier is allocated to one user like the OFDM.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.44-52
• /
• 2018

This experiment was conducted at Suwon, Korea from 2013 to 2015. The objective of this study was to establish the optimum seeding rate, and to clarify the nitrogen fertilizer level for rye seed production in central and north area of Korea. We used Korean rye cultivar 'Gogu' for this test. We employed a split-plot design with three replications. The main plots were designed by three seeding levels (3, 5 and $7kg\;10a^{-1}$), but other sub-plots were randomly seeded. The plots were treated with three different nitrogen fertilizer levels (3, 6 and $9kg\;10a^{-1}$). The percentage of productive tiller, number of grain per spike, fertility rate, 1 liter weight, and 1000-grain weight decreased as seeding rate increased from $3kg\;10a^{-1}$ to $7kg\;10a^{-1}$, whereas the number of spike per $m^2$ increased. Therefore the grain yields of rye had less of an effect by increasing seeding rate. There was an increase in number of spike per $m^2$, number of grain per spike, and fertility rate as nitrogen fertilizer level increased from $3kg\;10a^{-1}$ to $9kg\;10a^{-1}$, but grain yields significantly not affected by the interaction of seeding rate ${\times}$ nitrogen fertilizer levels. However, the best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and $5{\sim}6kg\;10a^{-1}$, respectively, considering seed and fertilizer reduction and the prevention of pollution by excess fertilization.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.664-671
• /
• 2017

Non-point source pollution is the emission source that unspecifically releases pollutants to water system from unspecific places such as cities, agricultural lands, mountains, and construction sites and its discharge path is not easily identified. Also, it is difficult to design and manage the reduction facilities for the emission quantity is primarily affected from weather conditions like rainfall. Since 2006, the significance of non-point source pollution reduction has been grown in Republic of Korea and this reinforces needs for the installation of reduction facilities. However, because the standards for the installation details and reduction efficiency are not clarified by law, people are preferring technologies that do not require particular maintenance and high expenses. The purpose of this study is to examine and maintain the efficiency of non-point source pollutants reduction facility which uses expended polypropylene as a media. The higher the depth of the media, the less range of variations in the reduction efficiency was observed and the final efficiency was also increased. When the media depth was 60 cm, the average reduction efficiency was 94% and 90% where linear velocities were 10 m/hr and 20 m/hr respectively. The results from 180 minutes operation in 10 m/hr and 20 m/hr of linear velocities were slightly different in head loss changes which were caused by media depth variations. The backwash experiments which were conducted in triplicate showed the reduction efficiency decreased as the time went on because of the media clogging. However, it was found that after the backwashing the reduction efficiency was increased as effective as the efficiency of the initial filtration.