• KIEAE Journal
• /
• v.12 no.1
• /
• pp.35-43
• /
• 2012

Algorithm-based architecture helps specifically dividing the environmental variables of a target space into individual factors to build object-oriented programming, classifying them into an individual object according to the environmental variables of each planning circumstance, and distributing each structure into small structures. In addition, each itemized matter of construction is set as a condition, and thus it is possible to respond to the space condition of various circumstances which occur in the architectural planning process. This study is intended for predicting that a sketch role in the design process can be replaced by a design method utilizing an algorithm, through the external solar radiation and the illuminance value of indoor lighting device among the environmental variables of a target space, and for seeking a way to create a design alternative and improve the design quality by using computer-based algorithm design.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2013

This paper describes the design optimization of Unmanned Aerial Vehicles(UAVs). An optimization framework has been developed and implemented for the conceptual design of UAVs. An integrated design analysis program was developed with several analysis modules such as propulsion, performance, mission, weight, and stability and control. A UAV configuration design optimization was performed by implementing the integrated analysis to enhance the endurance of UAVs. A SQP optimizer was utilized to build an optimization module for this program and sensitivity analysis was performed to determine the trends of shape variables for developing optimization objective. In conclusion, the results indicate that the resulting optimized UAVs configurations show performance improvements over the baseline design and reliable analysis results.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.42-45
• /
• 2008

This project was designed to create good interior design of lobby and cafeteria in the D company. To promote the efficiency and comfort of the working environment diverse employee's working characteristic and individual requirements have been observed. Cafeteria is the important place for employee to have a rest time. And to build a good impression about company, lobby is the very important place to visiter. In this project, the design idea for the lobby and cafeteria targets harmony of the functionality and the aesthetic with the modern and simple design. This project could be able to deliver more convenient and comfortable cafeteria by adopting three concepts like flexibility, functionality and simplicity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.177-183
• /
• 2013

We describe a new method for selecting design variables for shape optimization of high-voltage gas circuit breaker using a Kriging meta-model and a genetic algorithm. Firstly we sample balance design variables using the Latin Hypercube Sampling. Secondly, we build meta-model using the Kriging. Thirdly, we search the optimal design variables using a genetic algorithm. To obtain the more exact design variable, we adopt the boundary shifting method. With the proposed optimization frame, we can get the improved interruption design and reduce the design time by 80%. We applied the proposed method to the optimization of multivariate optimization problems as well as shape optimization of a high - voltage gas circuit breaker.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.2
• /
• pp.87-91
• /
• 1987

This study was carried out to investigate the effects of different cutting times at 0, 10 and 20 days after lodging on the percentage of dead plants and bare ground, live and dead matter build-up, and botanical composition of orchardgrass dominated pasture during the mid summer season. For the test, a randomized block design with 3 replications was treated with 3 different cutting times (July 17, July 27 and Aug. 6). The results obtained are summarized as follows: 1. The percentage of dead plants with cutting times at 0, 10 and 20 days after lodging was 26.3,41.7 and 46.7'%, respectively. 2. The percentage of bare ground with cutting times at 0, 10 and 20 days after lodging was 13.3,26.7 and 3 1.7%, respectively. 3. Dead matter build-up with cutting times at 0, 10 and 20 days after lodging was increased significantly with later cutting (p<0.05). The ratio of live and dead matter build-up with cutting times at 0, 10 and 20 days after lodging was 90.2:9.8, 47.7:52.3 and 39.1:60.9%, respectively. 4. Regrowth yield after lodging was decreased significantly (p<0.05) with later cutting time. 5. The percentage of legumes in botanical composition was increased greatly with later cutting time. The ratio of grasses and legumes with cutting times at 0, 10 and 20 days after lodging was 77.8:21.6,45.5: 50.3 and 36.5:61.7%, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.95-98
• /
• 2006

This paper proposes high speed SRM drive system for blower with a new 4-level inverter and precise excitation position generator. For the high speed blower, a proper inverter and control method are proposed and the output characteristics are analyzed. In order to get a fast build-up and demagnetization of excitation a current, 4-level inverter system is proposed. The proposed 4-level inverter has additional charge capacitor, power switch and diode in the conventional asymmetric converter. The charged high voltage is supplied to the phase winding for fast current build-up, and demagnetization current is charged to additional capacitor of 4-level inverter. In addition, a precise excitation position generator can reduce turn-on and turn-off angle error according to sampling period of digital control system. The proposed high speed SRM drive system is verified by computer simulation and experimental result.

• Korean Management Science Review
• /
• v.17 no.3
• /
• pp.49-60
• /
• 2000

The proliferation of electronic commerce(EC) has led manufactureres to consider Internet based marketing as a salient candidate for strategic diversification of marketing channel. In this case, each manufacturer can build its own Web store or rent an existing special EC store. Such decision making of ‘build’ or ‘rent’ can be analyzed by a game model which derives the Nash solutions for price and profit considering degree of competition with other competitive manufacturers. In this paper, to overcome the drawbacks of the traditional linear demand function, we first propose a new linear demand function which incorporates not only the price difference between competitive products but the awareness of Web stores perceived by the consumers, then design the game models to analyze the characteristics of three typical types of marketing channel in duopoly market. Based on the Nash solutions of the game models, we analyzed the effect of the degree of competition and Web awareness in selecting the optimal marketing channel.

• Journal of Biomedical Engineering Research
• /
• v.9 no.2
• /
• pp.195-210
• /
• 1988

We build up distributed database of medical picture and design and realize H/W & S/W of special image workstation. We build up high speed image transmission system for distributed database and retrieval of various medical pictures in w ard through image transmission system and realize integrated image diagnosis. This system improves medical service by speedy diagnosis and enables more precise diagnosis by integrated image diagnosis through distributed database. In economical view this system curtails huge cost of film processing and transmission, which make medical expense cheaf, because it does not use film. We built up PACS in pediatric hospital of Seoul National University Hopital and tested the system with various medical pictures and showed that speedy integrated image diagnosis is possible.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2015

The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. Thus, we consider several factors to build the safety estimation model to meet fairness and rationality. This paper present the yearly statistic data of accident from KOSHA analyze the data by industry, scale, year of service of a employee, age and other factors; build the safety estimation model for the business based on the accident report derived the analysis. The estimation model is established by the weights for accident type, degree, scale, industry, year of service, and age of the employee derived from ANP(Analytic Network Process).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.105-108
• /
• 1997

To reduce design period, demands for rapid prototyping system is increasing. Among the rapid prototyping system, as a concept modeler, 3D Printer appears before the footlights. In spite of short production time and convenience, 3D Printer causes post processing problem. And that is too slow to adapt to the demand of workshop. In this research, we developed a system for reducing build time and roughness using splitting operation. Also, propose BFS(B-rep For STL) data structure to maintain model data, split STL model and implement Euler Operation for input and output.