• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.70-78
• /
• 1993

Heat pipes, applied to flat plate solar collectors, have a long and slender configuration with relatively low heat flux on the evaporator. Such a heat pipe has a tendency to build-up a liquid pool at the lower half of evaporator zone, and at this pool occurs such complicated phenomena of evaporation and fluid dynamics as superheat, sudden generation of bubble, its likely explosive growth process and flooding etc. In the present study, we tried to solve those problems by means of adjusting the two principle design parameters, liquid fill charge and wick length, using 4 heat pipes and 3 thermosyphons, with different values of parameter respectively. The corresponding results can be summarized as followings, - The thermal conductance of heat pipes was largely improved by el eliminating wick from adiabatic and condenser zone. - But on evaporator zone wick is inevitable to reduce behavior of the build -up of liquid pool , where arise diverse internal complex phenomena. - The liquid fill charge should have to be increased by 10∼20％ more than the quantity to saturate the wick.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.09a
• /
• pp.183-192
• /
• 2001

1- Buildup PCB technology is utilized to a bare chip attach substrate technology for packaging of semiconductor chip 2- Requirement for the substrate design rule is described in SIA International Technology Roadmap for Semiconductor. 3- There are seven fabrication methods of build-up technology. 4- Coating and lamination for resin and photo, and laser for micro via hope processes are available. Below $50\mu\textrm{m}$ in diameter is possible. 5- Fine pitch lines down to $30\mu\textrm{m}$ can be achieved by pattern plating with better electrical property. 6- Dielectric loss reduction is a key material improvement item for next generation build-up technology. 7- High band width up to 512 GB/s is possible with current wiring groundrule.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.236-245
• /
• 2003

Environment friendly architecture, which will reduce shortcomings of current architectural culture, can be achieved by using natural energy and environment friendly building materials together with their environmental architecture techniques. Particularly, even though the overall building system is perfect, it cannot be considered as comfortable architectural space if the materials are polluted, harmful to human bodies and producing wastes. Therefore, in order to build environment friendly architecture, the selection of the materials is very important and necessary from the planning stage with careful reviews and concern. This study tries to define what the environment friendly materials we, to investigate and to classify them, in order to provide some guidelines for selecting them at plans to build. For examples, the materials can be classified into natural materials, continuously usable materials, recycled materials from wastes, and less polluting materials mixed with natural materials. Finally, this study reviews the existing products in the market and proposes to develop new ones in the future. It will present the circulation of resources in the 21century through recycled and reused materials.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.421-431
• /
• 2005

This paper introduces a new approach for saving build time of hybrid rapid prototyping by decomposing a part into minimum number of layers. In the hybrid rapid prototyping, a part of a complicated shape is realized by adding layers of a simpler shape, each of which is obtained by machining a sheet of constant thickness from its top and bottom surfaces. Thus it is desired to decompose a given part into the minimum number of layers while guaranteeing each layer to be fabricated from the given sheets using a 3-axis milling machine. To satisfy these requirements, a concave edge-based algorithm is proposed to decompose a part into layers by considering the tool accessibility, the total number of layers, and the allowable sheet thickness.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.285-299
• /
• 2018

Recently much attention in building smart factory has been dramatically increased. Despite the growing interest in smart factory, few practical guidelines exist how to successfully build smart factory. The purpose of this study is to postulate and develop a road map for building successful smart factory. To enhance mundane realism, we design the road map through University-Industry research collaboration. Specifically, drawing analysis of University-Industry research collaboration, we design a prototype and detailed road map or building successful smart factory. Moreover, we apply the road map into actual smart factory development. By doing so, we successfully prove the effectiveness of the road map. Therefore, this study provides the valuable guidelines and directions to build a successful smart factory. Ultimately this study is able to help a variety of factories which establish and implement smart factory. Further, we hope that this study will be placed to be an important foundation research on behalf of smart factory building.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.1014-1025
• /
• 1987

This paper proposes an approach of building an expert system for designing gear drives. In terms of gear drives the relationship between expert systems and data base systems is explained and a data base system for design, failure detection, and trouble-shooting of gear drives is built on a personal computer by the data manipulation language of dBASE III. This paper proposes a method how to build a data base system and what to consider to build a data base system for gear drives and two kinds of data base systems of design and failure detection of gear drives and trouble-shooting for noise and vibration of gear drives are built. The two data base systems are very effective for the retrieval of information for the gear design, and they will be considerably helpful for the gear design.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.437-443
• /
• 2009

Generally speaking, the uniqueness of Korea for the high-speed railway rolling-stock is mainly perceived through the travel over the high-speed electric railway by passengers, which consists of the organization of space in the coach and its interior design. For such purpose, it is necessary to build a series of independent cultures with high-speed railway i.e. to have the development of design technologies oriented to harmonizing human beings, their society and culture with the systematic integration of production technologies to support the culture and its substructure foundation which constitute the frame of superstructure in the society, by defining the relationships with travelers on the high-speed railway as well as enhancing the comfort and convenience of high-speed railway through drawing up the development of links with the systematic integration among lines of technologies on the basis of 'User Train Interface. This thesis aims at introducing the study carried out to build the evaluation standards of performance outputs for 'HEMU-400X rolling-stock Design' derived from the performance for the first year in the research 'Development of Technologies for the Next-Generation High-Speed Railway' as part of "Development Project for the Future Railway Technologies" from 2007.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.74-82
• /
• 2022

Improving long-term performance in highway projects is an imperative goal for public administrations. Project delivery and procurement methods might provide an opportunity to align design and construction processes with this goal. Previous studies have explored whether project delivery methods impact the long-term performance of highway projects. However, these studies did not focus specifically on how core elements within the procurement might relate to long-term performance. Thus, this research aims to fill this gap by exploring to what extent and how long-term evaluation criteria are considered in design-build best-value procurement of highway projects. To this end, content analysis was conducted on 100 projects procured between 2009 and 2019 by 19 DOTs across the U.S. The analysis of 365 evaluation criteria found that (1) roughly 11% of them related to long-term performance. (2) The weight given to these criteria in the overall technical proposal was lower than 30%. (3) Sixty-five percent (65%) of long-term evaluation criteria focused on design while 15% related to materials and technology, respectively. The results of this study are a first steppingstone to initiate a deep exploration of the relationship between procurement practices and actual project performance. Currently, with sustainability and life cycle assessments being top concerns in infrastructure projects, this line of research might be of particular interest to DOTs and highway agencies across the U.S. and worldwide.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.83-92
• /
• 2010

The current design paradigm shift which has been in progress around the world would be a good opportunity for Korea, which has led the age of information, to build design competence and gain international competitiveness. In addition, it would be a good idea for colleges as well as firms to develop a new educational system and create academia-industry-research synergy. This paper researches the market KU project promoted by Design Venture KU which has been established by the College of Artand Design of Konkuk University as a part of differentiation strategy. The methods to improve the competitiveness of Korean fashion design by uniting college creativity and market practicality are as follows: First, for convergence of creativity and practicality, it is necessary to come up with a systematic design-based educational system. In other words, the undergraduate program needs to gradually expand courses by focusing on creativity instead of functions while the graduate program should be able to develop design pattern, textile and marketing products and secure the market to gain competitiveness as a business incubator. Second, the working-level engineers as well as professors will be encouraged to participate in special lectures or seminars and take necessary lessons. In addition, academia-industry cooperation courses will be further strengthened. It is also important to actively participate in an official contest or exhibition and receive a prize. Third, to elicit creativity from students, it is necessary to help them think in a flexible and experimental way with voluntary and interesting programs. As mentioned above, it is expected that 'Market KU Project' would help students build expertise by offering them a chance to experience the real world and become the world's leading designers in Korean fashion design.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.192-197
• /
• 1998

The article describes the development concept of global, regional and urban communication from the point of strategic target to build Shanghai into an international metropolis, as well its multi-way to raise funding.