• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.109-114
• /
• 2007

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, wheelset manufacturing for test, main line running test on the basis of the derailment theory and experience. It is executed main line test to 120 km/h for estimating the running safety of express train in Incheon International Airport. As the test results, could confirm the curving performance and running safety of Incheon International Airport EMU from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.8, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.849-854
• /
• 2008

For the running safety assessment of Saemaul train passing through curves, an analysis model for multibody system has been developed. By using this model and ADAMS/Rail, sensitivity analyses depending on the variation of parameters related to the derailment coefficients have been conducted. According to the increase of running speed, the derailment coefficient and unload ratio were increased. At high speed, the derailment coefficient and unload ratio of left wheel showed higher than right wheel. If the cant increased, the derailment coefficient and unload ratio increased. but decreased based on the balance cant value by the curvature and running speed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.56-61
• /
• 2006

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, wheelset manufacturing for test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 110km/h for estimating the running safety of Incheon Int'l Airport EMU. As the test results, could confirm the curving performance and running safety of Incheon Int'l Airport EMU from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.8, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.13-22
• /
• 2019

In this paper, the static and dynamic responses of a tied-arch railway bridge under train load were studied through field tests. The deflection and stresses of the bridge were measured in different static loading scenarios. The dynamic load test of the bridge was carried out under the excitation of running train at different speeds. The dynamic properties of the bridge were investigated in terms of the free vibration characteristics, dynamic coefficients, accelerations, displacements and derailment coefficients. The results indicate that the tie of the measuring point has a significant effect on the vertical movement of the test section. The dynamic responses of arch bridge are insensitive to the number of trains. The derailment coefficients of locomotive and carriage increase with the train speed and symmetrically distributed double-line loads reduce the train derailment probability.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.806-811
• /
• 2007

탈선은 차륜 플렌지가 레일에 접촉할 때 발생하는 횡방향의 힘이 커져 차륜이 레일을 이탈하는 현상이다. 탈선 또는 주행안전도를 평가하는 대표적인 기준은 탈선계수이다. 차륜에 스트레인게이지를 부착하여 탈선계수를 측정하는 기존방법은 대단히 복잡하고 측정의 실패확률도 높으며, 고도의 측정기술과 고가의 비용이 요구되고 있다. 따라서 안전성확인이 필요한 그 시점에 즉시 확인하지 못하고 있어 안전확보에 어려움을 겪고 있다. 본 논문에서는 차륜과 레일간의 접촉력인 윤중과 횡압을 쉽게 측정할 수 있는 방안을 집중적으로 연구하였으며, 가속도과 변위의 거동만으로 탈선 가능성을 예측할 수 있는 새로운 탈선계수 측정방법을 제시하였다.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.619-625
• /
• 2007

본 논문은 인천국제공항철도에서 운행하고 있는 전동차의 동적특성시험을 수행한 결과이다. 인천국제공항철도의 직통형 전동차는 국내 처음으로 120km/h로 주행한 차량으로 탈선계수를 공차와 만차로 구분하여 측정하였다. 탈선계수측정결과 탈선에 대한 안전성을 판단할 때 가장 기본적인 지표로 사용하는 탈선계수는 공차 때가 만차 때보다 높게 나타났으며, 공차와 만차 모두 0.8 미만이었다. 속도에 따른 탈선계수는 80km/h를 전후한 속도 대역으로 운행하는 구간이 선로상태가 좋지 않은 구간으로서 탈선계수도 증가하는 것으로 나타났다. 횡압은 공차 때에는 2.1톤 미만이었으며, 만차 때에는 2.4톤 미만으로 발생하였다. 인천국제공항철도 전동차가 120km/h 주행에서도 안전함을 탈선계수 실측에 의해 확인하였다. 그러나 본 논문에서 적용된 평가방법의 경우 시험방법이 복잡하고, 측정장치 설치의 어려움이 있으며, 비용이 많이 드는 단점이 있었다. 따라서 측정이 간단한 방법으로 영업운전에서도 차량의 안전성을 확인할 수 있는 방안이 연구되어야 할 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.683-684
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1287-1288
• /
• 2012

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1905-1913
• /
• 2011

The dynamic characteristic of bogie that is driving system of railway vehicle is very important regarding decision of vehicle characteristics as running safety and comport. The dynamic characteristic test of bogie is tested on full size in place on field testing on track. But, the testing on the full size caused many problems. To overcome these problem by full size test, the Railway Safety Research Center in Seoul National University of Science & Technology developed 1/5 scale size of small scale derailment simulator and is currently testing running stability of 1/5 scaled bogie. Also To take effectively advantage of running stability test using small scale derailment simulator in actuality design and reliability estimation, it is necessary comparison and examination with field test and theoretical analysis result In this paper. to achieve running stability analysis of 1/5 scaled bogie on small scale derailment. the program using MATLAB that is fast compose and analysis the motion equation of Saemaul power bogie is developed. It is achieved analysis according to various specification (weight, size, suspension, etc..) and is evaluated corelation between test result and dynamic characteristic of actual railway vehicle.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.169-175
• /
• 2015

This study aims to improve the dynamic stiffness of an inspection robot frame to prevent derailment from transmission lines. Finite element models for the transmission lines and robot frame are developed for the multi-body dynamic simulation. Natural frequency analysis was conducted using the FE models. Three types of spacer damper clamps installed on 4-conductor transmission lines are used to evaluate the derailment of the robot. Multi-body dynamic simulations with FE models are demonstrated for sub-span oscillation. When the robot operates, derailment of inspection robot from the transmission lines is determined because of resonance. To prevent the resonance, body position was changed and thickness optimization was conducted. The results show that derailment was not occurred because of the natural frequency improvement.