• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.277-291
• /
• 2023

To analyze the crustal velocity structures beneath 21 broadband seismic stations in Gangwon Province, South Korea, we first applied the H-κ stacking method to 139 teleseismic event data (Mw ≥ 5.8 and the epicentral distance of 30° - 90°) occurring between March 18, 2019 and December 31, 2022 to estimate the Moho depths and V_p/V_s ratios beneath each station. The Moho depths and V_p/V_s ratios from the H-κ stacking method range from 24.9 to 33.2 km depth and 1.695 - 1.760, respectively, and the estimated V_p/V_s ratios were applied to the joint inversion of receiver functions and surface wave dispersion to obtain 1-D crustal velocity models beneath each station. The resulting Moho depths range from 25.9 to 33.7 km depth, similar to the results from the H-κ stacking method. Moho depth results from the both methods are generally consistent with Airy's isostasy. The 1-D crustal velocity models confirm that the existence of 2 km thick low-velocity layers with P-wave velocities of 5 km/s or less at some stations in the Taebaeksan basin, and at the stations CHNB and GAPB in northern Gangwon Province, which are located above the Cenozoic sedimentary layer. The station SH2B, although not overlying a sedimentary layer, has a low P-wave velocity near the surface, which is probably due to various factors such as weathering of the bedrock. We also observe a velocity inversion with decreasing velocity with depth at all stations within 4 - 12 km depths, and mid-crustal discontinuities possibly due to density differences in the rocks at around 10 km depth below some stations.

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.209-216
• /
• 1999

In order to get geologic information necessary for underground installation of water pipe, seismic refraction profiling was applied to the southwest side of the Seomjin River which flows between Namwon-gun, Cholabuk-do and Gokseong-gun, Cholanam-do. Before obtaining the in-line refraction data, walkaway data were recorded with 1 m geophone interval and -36∼+36 m offset range. From the walkaway data, it is interpreted that a dry soil layer with the average velocity of 585 m/s covers wet sediments with the average velocity of 1,326 m/s. The second layer overlies basements nearly horizontally with the average velocity of 4,218 m/s. Refraction profiling of 220 m long with the geophone interval of 2 m is interpreted with the Generalized Reciprocal Method (GRM). Three layers are identified with average velocities of 688 m/s, 1,473 m/s, and 3,776 m/s, respectively. The depth to the bedrock impossible for ripping ranges between two extremes, 1.51∼2.43 m and 2.25∼3.54 m, depending upon thickness of the hidden layer. A typical shortcoming of refraction method, the hidden layer problem, prevents accurate estimation in depth of the second layer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.94-108
• /
• 2010

The purpose of this study is to provide data for the restoration of 'Yongyun(龍淵)' and 'Hwahongmun(華虹門)' through an investigation of the vicinity of their original landscapes at the time of construction of Hwaseong in Suwon and through tracing the transformative process of the environments of this vicinity. The results are as follows; As identified by 'Yongyunjung(龍淵亭)' and 'Yongdugak(龍頭閣)', other names of Yongyun, 'Banghwasuryujung(訪花隨柳亭)', which was built on 'Yongduam', is a facility whose place identity is highlighted with a sense of unity with Yongyun. The south lakefront of Yongyun, bordering Banghwasuryujung, has boundaries that make the best use of the natural geographical features of Yongduam while the current circumference of Yongyun is comparatively shorter than its original state. The size of 'Joongdo(中島)', however, seems to be an example of apparent over-design complement and reorganize 'Joongdo', which had been restored larger than its original state at the time of restoration in the 1970s. The depth of 'Yongyun' was created to be lower than the actual depth, without consideration for its initial depth, as soil was accumulated through continuous flooding after it was created. It is assumed that the original drains which were installed about 10m inside the lake were created facing the stream. As regards the planting environment, a circular planting of willows was made in the outskirts of 'Yongyun', except the 'Yongduam' which is a pure forest, and a mix of 'Pinus densiflora', shrubbery and deciduous broad leaf trees was planted in 'Joongdo'. Of the plants growing in the area of this study, plant species introduced to Korea after Hwaseong was constructed are found, most of which provide interest and attraction. The old pine trees growing in a group once grew in the castle areas of the vicinity even in the 1920s, the period of Japanese occupation, but they disappeared from the area in the aftermath of subsequent urban development and the Korean War. Although restored to the site, the number and space taken up by these trees are insignificant compared to those of the original environment. On the basis of these results, the following is considered necessary for the true restoration of the vicinity of 'Yongyun' and 'Hwahongmun': First, the grounds of 'Yongyun' should be dredged deeply enough to expose the bedrock and should be recreated in the rough outline of a half moon by extension to the southwest toward 'Yongduam' and 'Hwahongmun', and the size of 'Joongdo' should be significantly reduced. Secondly, considering that most plant species, except the pine trees and wild trees in 'Yongduam', are non-native plants introduced in order to provide such attractions such as the appreciation of scenic areas, they should be replaced with native species, mainly with the pine trees which were utilized during the construction of Hwaseong. The weeping willows planted in the 'middle-island' should be relocated to the outskirts of 'Yongyun', and replaced with pine trees as the major trees and maple trees or deciduous broadleaf trees to fill in the gaps. Thirdly, exotic species such as the 'Pinus rigida' planted in a group around 'Banghwasuryujung' and 'Bugammun' and 'Pinus strobus' planted in the vicinity of Hwahongmun' should be removed.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.145-157
• /
• 2017

Because of Recent intensive rainfall, nationally landslides and slope failure phenomenon has been frequently occur. Providing proposed-measures to the natural disasters that occur in these localities and the slope, must be derived ground of strength parameters(shear strength) as a design input data. However, it is such as extra deforestation and a lot of economic costs in order to make the access to the current area and the slopes ground survey is required. Thus, by small dynamic cone penetration test machine using the human to carry in the field, it is possible to easily measure the characteristics and strength constant of the ground of more than one region. In this study through researching analysis of the domestic and foreign small dynamic cone penetration test method, it has proposed a cone material and test methods suitable for the country. Cone penetration test Nc in the field has comparated with analysis of the value and the standard penetration test N value. And, in addition to this, direct shear test and borehole shear test were performed by depth, bedrock, and soil type and passing #200 and the correlation of the Nc value. In particular, in the present study, for the sandy soil that has distict distribute in mountain, it is proposed relation of shear strength corresponding to the Nc value (cohesion and internal friction angle) in order to calculate such effective ground shear strength.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.41-55
• /
• 2005

This research is aimed at investigating the ground characterization of the Cheongju granite area using the geophysical methods. Test site was chosen from the building site in Chungbuk University, Chongju, Chungbuk province. Furthermore, geophysical methods are employed on the outcrops in the east to map the distribution of fault and intrusion and reveal the degree of weathering. The subsurface structure mapped from seismic re-fraction survey mainly consists of two units of weathered soil and rock. Threshold of the units were determined on the basis of seismic velocity of 800 m/s, supported from the standard classification table. From the results of standard penetrating test(SPT), these units are found to show medium-high and high density, respectively. Weathering soil is subdivided in unsaturated layer and saturated layer with thresholds of seismic velocity (500 m/s) and resistivity (200 ohm-m). In particular, unsaturated layer is again classified into dry and wet portions using the GPR section. The boundary between unsaturated and saturated weathering soils corresponds to the groundwater table at depth of approximately 5～6.2 m, which is well correlated with the one from drill-core data. However, bedrock is not delineated by geophysical methods. In the GPR section, fault and intrusion observed on the outcrop are revealed not to extend to the building site. With respect to weathering degree, the outcrop characterized by low resistivity and velocity corresponds to the grade of 'completely weathered' from the geotechnical investigations.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.1
• /
• pp.5-19
• /
• 2009

Most of earthquake-induced geotechnical hazards have been caused by the site effects relating to the amplification of ground motion, which is strongly influenced by the local geologic conditions such as soil thickness or bedrock depth and soil stiffness. In this study, an integrated GIS-based information system for geotechnical data, called geotechnical information system (GTIS), was constructed to establish a regional counterplan against earthquake-induced hazards at an urban area of Daejeon, which is represented as a hub of research and development in Korea. To build the GTIS for the area concerned, pre-existing geotechnical data collections were performed across the extended area including the study area and site visits were additionally carried out to acquire surface geo-knowledge data. For practical application of the GTIS used to estimate the site effects at the area concerned, seismic zoning map of the site period was created and presented as regional synthetic strategy for earthquake-induced hazards prediction. In addition, seismic zonation for site classification according to the spatial distribution of the site period was also performed to determine the site amplification coefficients for seismic design and seismic performance evaluation at any site in the study area. Based on this case study on seismic zonations in Daejeon, it was verified that the GIS-based GTIS was very useful for the regional prediction of seismic hazards and also the decision support for seismic hazard mitigation.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.7
• /
• pp.57-67
• /
• 2023

Slope failures during rainfall have been observed in mountainous areas of South Korea as a result of the presence of solar power facilities. The seepage behavior and pore pressure distribution differ from typical slopes due to the presence of impermeable solar panels, and the load imposed by the solar power structures also affects the slope behavior. This study aims to develop a method for evaluating the stability of slopes with solar power facilities and to analyze vulnerable points by considering the maximum slope displacement. To assess the slope stability and predict behavior while considering rainfall seepage, a combined seepage analysis and finite difference method numerical analysis were employed. For the selected site, various variables were assumed, including parameters related to the Soil Water Characteristic Curve, strength parameters that satisfy the Mohr-Coulomb failure criterion, soil properties, and topographic factors such as slope angle and bedrock depth. The factors with the most significant influence on the factor of safety (FOS) were identified. The presence of solar power facilities was found to affect the seepage distribution and FOS, resulting in a decreasing trend due to rainfall seepage. The maximum displacement points were concentrated near the upper (crest) and lower (toe) sections of the slope.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.92-101
• /
• 2012

Three-dimensional finite-difference simulation in a small-scale half-sphere basin with planar free-surface is performed for an arbitrary shear-dislocation point source. A new scheme to deal with free-surface boundary condition is presented. Then basin parameters are examined to understand main characteristics on ground-motion response in the basin. To analyze the frequency content of ground motion in the basin, spectral amplitudes are compared with each other for four sites inside and outside the basin. Also particle motions for those sites are examined to find which kind of wave plays a dominant role in ground-motion response. The results show that seismic energy is concentrated on a marginal area of the basin far from the source. This focusing effect is mainly due to constructive interference of the direct Swave with basin-edge induced surface waves. Also, ground-motion amplification over the deepest part of the basin is relatively lower than that above shallow basin edge. In the small-scale basin with relatively simple bedrock interface, therefore, the ground-motion amplification may be more related to the source azimuth or direction of the incident waves into the basin rather than depth of it.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.39-49
• /
• 1996

There is a limestone basin surrounded by the mountains consisted of Paleozoic sedimentary and metamorphic rocks in the Masung, Munkyung city, Kyungsangpook do. The purpose of this paper is to elucidate the geomorphic processes of the gentle hillslopes in the marginal piedmont of Masung basin. To do so, I analyzed deposits over hillslopes and the relation ship between the distance from the divide and the height(above sea level) at the longitudinal profile of the hillslope, and considered interrelation between the distributions of the gentle hillslopes(less than 230m) and lithology. Geomorphic processes of Masung basin are as follow: (1) The depth of deposits over hillslope increases toward downstream of the hillslope. Most gravels within deposits, whose lithology is limestone, are those eroded at the boundary(overthrust fault zone) between the back-mountain and the hillslope. Deposits at the outward margin of hillslope is well sorted. and moderately imbricated. (2) Hillslope at the margin of the basin(160-230m asl) is formed by the action of 'the flow with channel'. At the boundary between the soft rock(limestone; basin floor) and hard rock(sedimentary and metamorphic rock; back-mountain), the relatively weak limestone is eroded to fresh bedrock by the subsequent action of the overland flow, and therefore discontinuity in slope appeared. (3) After hills lopes were formed, sediments(boulders and fine material) produced during dissection in back-mountain buried deposits over hillslope. In conclusion, geomorphic processes of Masung basin is 'differential erosion due to differentiation of lithological hardness' having suggested as geomorphic processes of granitic basin. However it is not 'removal of weathering material due to sheetflow' but 'erosion due to the overland flow with channel'.

• Geotechnical Engineering
• /
• v.3 no.4
• /
• pp.41-54
• /
• 1987

A stochastic numerical analysis for predicting the groundswater fluctuations in hillside slopes is performed in this paper to account for the uncertainties associated with the rainfall and site characteristics. The effect of spatial variabilities of aquifer parameters and the effect of temporal variability of recharge on the groundwater fluctuations are studied in depth. The Kriging is used to account for the spatial tariabilities of aquifer parameters. This technique prolevides the best linear unbiased estimator of a parameter and its minimum variance from a litsitem number of measured data. A stochastic one-dimensional numerical model is delreloped b) combining the groundwater flow model, the Kriging, and the first-order second-moment analysis. In addition, a two dimensional detelministic groundwater model is developed to study the change of ground water surfas in the transverse direction as well as in the downslope direction. It is revealed that the undulations of the impervious bedrock in addition to the permeability and the specific yield have an important influence on the fluctuations of the groundwater surface. It is also found that th'e groundwater changes significantly in the transverse direction as well as in the downslope direction. The results obtained in this analysis may be used for evaluation of landslide risks due to high porewater pressure.