• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.601-610
• /
• 2021

The tidal current patterns at Keum River Estuary before and after the construction of coastal structures were compared according to the CASES. The depth-integrated and tidal difference treatment applied FLOW2DH numerical model was used for the tidal current predictions. The test conditions consisted of before construction of coastal structures (CASE1), after construction of coastal structures (CASE2), and the addition of watergate operation(CASE1Q and CASE2Q), and present (CASE3). CASE1 showed a stable tidal current pattern, such as a natural estuary. In CASE2, the tidal current velocities and directions of the Keum River Estuary were changed due to the installed coastal structures. In particular, the tidal current velocities of the Gaeya open channel sections (P5~P9) in CASE2 were calculated to be 10~30% larger than that of CASE1. In the case of the Gunsan Inner Harbor (P4), which is closest to the Geum River Estuary, the ebb flow rate was approximately 250~300% faster than that of other CASEs due to the discharge of the watergate operation for 2.7 hours during the ebb of CASE1Q and CASE2Q. This will affect sediment transport, and it is predicted to lead to seabed changes. CASE3 is considered to be entering the stabilization stage according to the simulation of the tidal current velocities and directions of the Keum River Estuary and the surrounding coastal area.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.304-313
• /
• 2018

Agricultural land reclamation in Saemangeum tidal land project is mostly planned to be completed by 2020. Irrigation water for the land is required to be prepared by that time. However, water quality for the irrigation sources is barely meet the target concentration. This paper described the reduction effect of and policy consideration for best management practices (BMPs) which were fertilizer prescription by soil test (SO#1), mixed application of SO#1 and 3 (SO#2), drainage gate control (SO#3), time-release fertilizer application (SO#4), and control (CT). Reduction of paddy runoff was relatively higher in SO#3 (25%) and SO#1 (27%) while lower in SO#4 (9%) and SO#2 (7%) than that in CT. In addition, farmers promised to follow the BMP guidelines but they didn't because of the several problems caused for the BMPs implementation. Thus, it recommended developing an automated control of irrigation gate and paddy water depth and supporing farmers for NPS pollution control and irrigation water reduction.

• Journal of dental hygiene science
• /
• v.18 no.6
• /
• pp.374-379
• /
• 2018

This study attempted to identify factors work environment that affect job satisfaction in dental hygienists. This study was conducted between August 29 and September 28, 2017, as part of an in-depth study of the 'Survey on the Working Environment of Clinical Dental Hygienists' of the Korean Dental Hygienists Association. To get the responses, the questionnaire was posted on the website of the Korean Dental Hygienists Association, and of the respondents, 4,663 were selected and analyzed. An independent t-test and one way ANOVA analysis were used to make a comparison of job satisfaction according to the general characteristics, salary, and tasks. Logistic regression analysis was conducted to identify factors affecting job satisfaction. The significance level was 0.05. In regard to salary information, the job satisfaction was found to be high (p<0.001) in cases where the salary was considered appropriate, when incentives were provided, when rewards or vacation expenses were supported, and when overtime and nightly work allowances were paid. In regard to job information, the job satisfaction was found to be high (p<0.001) when the volume of work was considered appropriate, when there were sufficient numbers in the workforce, and when the division of labor among the other personnel was clear. As a factor affecting job satisfaction of dental hygienists, the case of thinking that 'workload is appropriate' was found to be 2.052 times, showing the highest score. Job satisfaction in dental hygienists affects the turnover and has a significant effect on the performance of the organization. Therefore, it is believed, that it is urgent to improve the working environment such as salary and clear division of duties affecting job satisfaction of dental hygienists.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.472-482
• /
• 2019

This paper describes the stabilization of underwater TAS winch system Deploy/Recover operation performance. TAS winch installed on the stern of submarine performs to deploy/recover sensor, towing cable and rope tail which is deployed from the stern and separated from submarine itself. Also TAS winch provides transmission path of power to the sensor and data transmitting/receiving path which data are acquired from underwater environment like sound, depth and temperature. At the step of TAS winch evaluation test, sporadic standstill and rotating speed oscillation phenomenon were occurred. Winch motor provides the available torque to deploy/recover TAS and root cause analysis to the winch motor was done to find exact reason to sporadic malfunction. When winch motor was disassembled, eccentricity of rotor, slip-ring and the other composition part for winch motor were found. These might cause magnetic field distortion. To make TAS winch system more stable and block magnetic field distortion, this paper suggests methods to enhance fixing status installed in winch motor. For reliable data acquisition for TAS winch operation, the deploy/recover function of the improved type of TAS winch was verified in LBTS making similar condition with sea status. At the end of stage, improved type of TAS winch was tested on some functions not only deploy/recover function, but sustainability of TAS operation on specific velocity, steering angle of submarine in the sea trial. Improved type of TAS winch was verified in accordance with design requirement. Also, validity of suggested methods were verified by the sea trial.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.207-215
• /
• 2018

This study started from the point that the most important SMEs in the economic growth engine of Korea are prepared to grow through innovation. This study focuses on the fact that existing studies have focused on the open innovation of SMEs has been continued since the external knowledge search became an important concept, but mainly focused on the enterprise performance. The purpose of this study is to examine the moderating effect of innovation speed focusing on exports to Korean SMEs. The hypothesis suggests the depth and breadth of external knowledge search, which is the two methods of open innovation emphasized in the previous studies, and then shows the innovation speed on export performance as a moderating effect. Robust regression analysis was used for the analysis and the sample used for the analysis was valid 1,357 SMEs data. The hypothesis test for the moderation effect was performed by comparing the F-values between models. The proposed hypothesis was adopted and the moderation effect was verified.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.168-177
• /
• 2019

KRISO (Korea Research Institute of Ship & Ocean Engineering) started a project to develop the core algorithms for autonomous intervention using an underwater robot in 2017. This paper introduces the development of the robot platform for the core algorithms, which is an ROV (Remotely Operated Vehicle) type with one 7-function manipulator. Before the detailed design of the robot platform, the 7E-MINI arm of the ECA Group was selected as the manipulator. It is an electrical type, with a weight of 51 kg in air (30 kg in water) and a full reach of 1.4 m. To design a platform with a small size and light weight to fit in a water tank, the medium-size manipulator was placed on the center of platform, and the structural analysis of the body frame was conducted by ABAQUS. The robot had an IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and a depth sensor for measuring the underwater position and attitude. To control the robot motion, eight thrusters were installed, four for vertical and the rest for horizontal motion. The operation system was composed of an on-board control station and operation S/W. The former included devices such as a 300 VDC power supplier, Fiber-Optic (F/O) to Ethernet communication converter, and main control PC. The latter was developed using an ROS (Robot Operation System) based on Linux. The basic performance of the manufactured robot platform was verified through a water tank test, where the robot was manually operated using a joystick, and the robot motion and attitude variation that resulted from the manipulator movement were closely observed.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.21-31
• /
• 2018

Bucket foundations are widely used in offshore areas due to their various benefits such as easy and fast installations. A bucket is installed using self-weight and the hydraulic pressure difference across the lid generated by pumping out water from inside the bucket. When buckets are installed in high permeable soil such as sands, upward seepage flow occurs around the bucket tip and interior, leading to a decrease in the effective stress in the soil inside the buckets. This process reduces the penetration resistance of buckets. However, the soil inside and outside the bucket can be disturbed due to the upward seepage flow and this can change the soil properties around the bucket. Moreover, upward seepage flow can create significant soil plug heave, thereby hindering the penetration of the bucket to the target depth. Despite of these problems, soil disturbance and soil plug heave created by suction installation are not well understood. This study aims to investigate the behavior of soil during suction installation. To comprehend the phenomena of soil plug heave during installation, a series of small-scale model tests were conducted with different testing conditions. From a series of tests, the effects of tip thickness of bucket, penetration rate, and self-weight were identified. Finally, soil properties inside the bucket after installation were approximated from the measured soil plug heave.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.503-515
• /
• 2018

Stupa of State Preceptor Jigwang at Beopcheonsa temple site, Wonju, was conserved and restored in 1957. It was necessary to assess the degree of damage to the used mortar and to provide objective data on the necessity of its removal. Therefore, the HCP(half-cell potential) measurement used in concrete fields was applied. Multi-regression analysis of HCP data, following the rapid corrosion test of the roofstone mortar used by the rebar, resulted in a high correlation of HCP values(0.86), depending on the amount of corrosion and cover depth used for the steel bar. As a result, high correlation values(0.86) for the coefficients of determination were derived. The showed that the measurement of the wet conditions -431 to -663 mV on the roofstone indicated a corrosion damage rate of 90% or more after removal and restoration.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.40-44
• /
• 2019

Purpose Glomerular filtration rate (GFR) is an important index for evaluation of renal function, renal disease diagnosis and progress monitoring. Therefore, accurate measurement of GFR is clinically important. Among the factors that affect the GFR result, there have been many discussions on the methods such as the correction of the kidney depth, net syringe count, and the method of setting the ROI. However there has been no consideration of counting in the most basic factors like height and weight measurement. In this study, we investigate how height and weight changes affects the result of GFR and review the importance of standardized body measurements. Materials and Methods Fifty patients who underwent GFR test were randomly sampled and examined for changes in height and body weight within one month. From the normal patients without renal disease to the patients with severely decreased GFR, we applied the GFR formula of Gate with varying height and weight. Results: The result showed variation of the height at maximum three centimeters and six kilograms of weight. The first calculation of GFR was done with fixed height value and control variable as weight. Weight was incremented by one kilogram each time up to six kilograms. The GFR showed increased result with increasing weight. The result of GFR showed ten percent increase with six kilograms of weight increase. On the other hand, when height value was incremented by one centimeter up to three centimeters showed decreased GFR result with fixed weight value. Up to three centimeters of height increase showed two percent of decreased GFR with fixed weight. Conclusion This study showed varying GFR result when height and weight changes. Therefore it is clinically crucial not only to maintain and manage body measuring instrument but also to have a standardized measurement methods to derive accurate measured values and to achieve reproducibility.

• Industry Promotion Research
• /
• v.4 no.1
• /
• pp.67-78
• /
• 2019

This study is to study Jung's analytical psychology and to study counseling process and counseling techniques based on the counseling theory derived from it. Jung divides the counseling process into four stages based on analytical psychology. The first stage is confession, and the prototype of analysis therapy is confession. The first step in the treatment process is to share secrets and reveal suppressed emotions. The second stage is elucidation, a process that clarifies by shedding light on the contents induced by the transfer. The third stage is the level of education. Explanation makes my counselors intelligent, but leaves them still in an incompetent state. At this stage, treatment goes beyond insight to train as a responsible client. The fourth stage is transformation. In the transformation phase with inner counselors, not only the debaters, but also the therapist is in the "in-analysis." Jung's counseling technique uses six things: dream analysis, use of symbols, word link test, symptom analysis, case history and MBTI. In conclusion, analytical psychology counseling has enabled, first, a more in-depth approach and understanding of the human mind, especially the unconscious world. Second, analytical psychology counseling has enabled us to recognize that all humans are human communities with a common mental structure through the concept of unconsciousness and archetypes. Third, analytical psychology counseling has allowed you to look at the meaning and purpose of life from a new perspective. Therefore, Jung emphasized that he should not be seen as having a pathological problem with patients, but as an omnipotent human being who wants to realize its fullness on his own.