• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.127-139
• /
• 2017

고양 지역의 화강 풍화암 지층을 대상으로 시추조사 및 다양한 현장 시추공 시험(프레셔미터시험, 공내전단시험, Downhole test, Suspension PS 검층, 밀도검층)을 수행하였고, 채취한 풍화암 코어시료에 대한 X선 형광분석을 실시하여 풍화도를 평가하였다. 현장 시추공 시험 결과로부터 변형계수, 전단강도 정수, 전단파 속도 등을 평가하였고, 심도에 따라 각 지반특성 값이 증가하는 경향을 확인하였다. X선 형광분석을 통해 산정한 화학적 풍화지수는 심도에 따라 풍화도가 감소하는 일반적인 경향을 나타냈으며, 대표적 풍화지수인 VR과 풍화암의 지반특성과의 관계를 분석하였다.

• Advances in concrete construction
• /
• 제13권3호
• /
• pp.265-279
• /
• 2022

The roughness of substrate concrete interfaces before new concrete placement has a major effect on the interface bond behaviour. However, there are challenges associated with the consistency of the final roughness interface prepared using conventional roughness preparation methods which influences the interface bond performance. In this study, five quantitative interface roughness textures with different roughness tooth angles, depths, and tooth distribution were created to ensure consistency of interface roughness and to evaluate the bond behaviour at a precast and new concrete interface using the splitting tensile test, slant shear test, and double-shear test. In addition, smooth interface specimens and two separate the pitting interface roughness were also utilized. Obtained results indicate that the quantitative roughness has a very limited effect on the interface tensile bond strength if no extra micro-roughness or bonding agent is added at the interface. The roughness method however causes enhanced shear bond strength at the interface. Increased tooth depth improved both the tensile and shear bond strength of the interfaces, while the tooth distribution mainly influenced the shear bond strength. Major failure modes of the test specimens include interface failure, splitting cracks, and sliding failure, and are influenced by the tooth depth and tooth distribution. Furthermore, the interface properties were obtained and presented while a comparison between the different testing methods, in terms of bond strength, was performed.

• 한국강구조학회 논문집
• /
• 제29권2호
• /
• pp.135-145
• /
• 2017

본 연구는 춤이 큰 하이브리드 합성보의 1차 휨 성능 평가 후, 2차 연구로써 춤이 큰 하이브리드 합성보와 기둥 접합부의 내진성능평가 실험이다. 실험 변수는 보 춤, 부모멘트 철근 수, 브라켓과 보 이음부의 볼트 수 등으로 3개의 실험체를 제작하였다. 접합부 상세는 기둥에 브라켓을 접합 후, 브라켓에 하이브리드 보를 이음하였다. 브라켓과 보 이음은 하부와 웨브는 볼트접합, 상부는 용접접합하였다. 실험결과 내력은 정 부모멘트 모두 소성모멘트($M_p$) 이상을 확보하였으며, 변형능력은 3% 이상의 층간변위각을 확보하여 합성중간모멘트골조의 요구조건을 만족하는 것으로 나타났다. 그러므로 춤이 큰 하이브리드 합성보에 철골철근콘크리트 기둥을 적용하는 경우 본 연구결과의 접합부상세를 적용하면, 중간모멘트골조의 내진성능을 확보할 수 있다고 판단된다.

• 한국의학물리학회지:의학물리
• /
• 제17권2호
• /
• pp.123-129
• /
• 2006

최근 발표된 EGS5 몬테칼로 코드의 방사선치료 응용을 위한 시험코드를 작성하였다. 본 시험코드는 점선원 모델과 원통형 팬텀에 대하여 깊이선량을 계산하도록 작성되었다. 시험코드의 평가를 위하여 6, 9, 12, 15 MeV 전자선 그리고 Co-60, 10 MV 광자선에 대한 깊이선량을 계산하고 DOSRZ/EGS4의 결과와 비교하였다. 시험코드와 DOSRZ 코드와의 깊이선량 계산결과의 차이는 전자선에서 약 ${\pm}1.5%$ 이내, 광자선에서 약 ${\pm}3.0%$ 이내를 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.345-350
• /
• 2001

Reinforced concrete is, in general, known as a high durability material due to a strong alkalinity of cement. Probable concrete cracks could incur steel corrosion of RC structures and then could easily deteriorate the concrete durability, which can be fully secured by a systematic quality control for the construction of concrete structures. For the corrosion protection of reinforcing steels in concrete, however, current design specifications of concrete cover depth do not in-depth consider the effect of the cracks as well as the chloride content of RC structures. Therefore, appropriate provisions for concrete cover depth should be coded by considering the influence of concrete cracks on the corrosion of reinforcing steels. The objective of this research is to investigate pertinent cover depth, which can prohibit rebar corrosion, on the basis of experimental corrosion measurements of reinforcing steels on crack characteristics such as the width, depth and frequency of concrete cracks.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.45-48
• /
• 2005

The purpose of this study is to investigate evaluation technique of damaged depth of concrete exposed at high temperature. In order to evaluate damaged depth of core picked at member under fire, the 12 specimens have been made with variables of concrete strength(20Mpa, 40Mpa, 60Mpa). Water absorption after heating has been measured and split tensile stress test was performed. The results show that the deeper of the depth from heating face, water absorption ratio is smaller and tensile failure stress is larger. Using this technique at damage evaluation of fired structure, We evaluate damaged depth of member under fire and determine the reasonable strengthening range.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.890-895
• /
• 2003

The purpose of this experimental study is to investigate the influence of shear span-to-depth ratio on the minimum shear reinforcement ratio of reinforced concrete beams. In this study, 7 reinforced concrete beam specimens were tested. The parameters of experiment are shear span-to-depth ratio(a/d=2.0, 3.0, 4.0) and shear reinforcement ratio($p_v$=0%, 0.183%, and 0.233%). The section of all secimens was 350mm width and 450mm depth. The observed results were compared with the calculated results by the current ACI 318-02 Building Code and the proposed equation. The safety rate of the specimens, L5S2A, L5S3A, L5S4A, and L5S4P specimens were 1.80, 1.25, 1.38, and 1.56 respectively. The test results indicated that the shear behavior of reinforced concrete beams with the minimum shear reinforcement was influenced by the shear span-to-depth ratio.

• 대한인간공학회지
• /
• 제19권3호
• /
• pp.61-75
• /
• 2000

To enhance web site's usability, it has been suggested that the depth of tree structured menus should be minimized. In this research, experimental results are reported to quantitatively compare the methods currently used for reducing the depth of menus in web sites. 25 popular web sites were selected and their menu types were categorized into four types: top menu, drop-down menu, boolean menu, and table of contents. The four types of menu were then sub-categorized into 15 different types according to their sub-menu type, existence of menu colors, and the event occurring after mouse activation. Performance tests and subjective evaluation were carried out. The results showed that there were no significant differences in terms of response time among the 15 menu types, while table of contents and drop-down in which the first and second level of menus were visible induced the least number of errors. In the subjective test, the top-menu structure with colors and presentation of its sub-menu without clicking mouse were preferred.

• 한국임상보건과학회지
• /
• 제1권2호
• /
• pp.31-37
• /
• 2013

Purpose. This study was to investigate the analysis of the central corneal thickness and anterior chamber depth of eyes in Korean Young Population using the Pentacam topography. Methods. The subjects consisted of 126 eyes from normal cornea of Korean aged 7-12($8.857{\pm}1.501$) years during 2009. The thinnest location, pachy apex, and pupil central region of the cornea thickness was measured using the Pentacam pachymetry. The anterior chamber depth of normal corneas was measured with Pentacam. Results. The thinnest location of corneal thickness was $547.413{\pm}37.893$um. The pachy apex of cornea thickness was $552.103{\pm}36.016$um. Also, the pupil center of corneal thickness was measured $552.143{\pm}36.418$um. On the other hand, the mean thickness in the central cornea was a statically significant relationship(t-test, p=0.0002) between pachy apex and thinnest zone. Also the mean thickness of the central cornea was a statically significant correlation(pearson p=0.0001) among the pupil center, pachy apex and thinnest zone. The anterior chamber depth was $3.137{\pm}0.308$mm. The mean depth in the anterior chamber of cornea was a statically relationship(t-test, p>0.05) between OD and OS. Conclusions. The results of this clinical study suggested that the analysis of the central corneal thickness and anterior chamber depth using Pentacam in Korean young population can provide the useful morphological information in diagnosis of cornea for the contact lens fitting and corneal refraction surgery.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.103-110
• /
• 2005

이 논문에서는 현장 수압파쇄시험에서 얻어진 500개 이상의 측정 자료들을 이용하여 국내 과잉 수평응력의 분포 특성에 대한 연구를 수행하였다. 현장 자료를 바탕으로 수평응력 성분의 크기와 작용방향성, 측압계수 분포에 대한 상세 분석을 하였다. 또한 심도에 따른 수평응력 성분들의 상관식과 측압계수 분포 영역의 상, 하한 경계식을 제안하였다. 심도 310m 미만 영역에서 측압계수는 심도 증가에 따라 감소되고 안정화되는 경향을 나타내지만 지역에 따라 심도 loom 이상의 영역에 3.0에 가까운 측압계수를 가지는 과잉 수평장이 형성되어 있는 것으로 조사되었다. 과잉 수평응력장 분포지역에 대한 평가 결과 국내 여러 지역의 심도 310m 이내 구간에서 암반 구조물 굴착시 응력에 의한 취성파괴의 가능성이 있는 것으로 분석되었다.