• Title/Summary/Keyword: depth test

Search Result 3,419, Processing Time 0.027 seconds

The Selection of Appropriate Sampler for the Assessment of Macrobenthos Community in Saemangeum, the West Coast of Korea (새만금 외해역에서 대형 저서동물 군집 조사를 위한 적정 채집기의 선택)

  • 유재원;김창수;박미라;이형곤;이재학;홍재상
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.8 no.3
    • /
    • pp.285-294
    • /
    • 2003
  • To select an appropriate sampler for the environmental monitoring survey in coastal waters of Saemangeum, Jeollabuk-do, a macrobenthic sampling was conducted in April 2002. Employed samplers were dredge (type Charcot), a semi-quantitative sampler and Smith-McIntyre (SM) and van Veen grab (VV) as quantitative ones. One haul was tried for dredge and 3 replicates (0.1 ㎡${\times}$3) for SM and W at each of 11 stations. Comparisons of sediment volume in sampler bucket and of precision of biological parameters (i.e., density, biomass, species number and diversity index, H') were made between SM and VV. Sediment volume was significantly different (SM > VV) at p-value of 0.0050 (paired t-test) and, in average, 3 replicate samples of SM and VV satisfied a precision level of 0.2 by applying 4th root transformation. Patterns of observed and expected species numbers and H' were compared. Dredge-VV samples showed higher affinity than any other pair. Several dominant species in the area were underestimated in dredge samples (e.g., polychaete Heteromastus filiformis. Aricidea assimilis etc.). Quantifying the agreement pattern of multi-species responses was accomplished by estimating correlations between similarity matrices. Correlation between dredge and VV was slightly higher, but near-per-fect matches were found in general. Different ranks and composition among principal species lists were presumably linked to the effect of penetration depth that differs among samplers. Lower level of some species' abundance in VV samples (ca. 50% compared with those of SM) was explained in this context. It seem appropriate to regard the effect as a probable cause of relatively higher correlations in dredge-VV, Overall bio-logica1 features indicated that a better choice could be SM in situations of requiring high data quality. The others work well, however, on observing and defining faunal characteristics and their capability cannot be questionted if we do not expect a first-order quality.

Feasibility Test on Automatic Control of Soil Water Potential Using a Portable Irrigation Controller with an Electrical Resistance-based Watermark Sensor (전기저항식 워터마크센서기반 소형 관수장치의 토양 수분퍼텐셜 자동제어 효용성 평가)

  • Kim, Hak-Jin;Roh, Mi-Young;Lee, Dong-Hoon;Jeon, Sang-Ho;Hur, Seung-Oh;Choi, Jin-Yong;Chung, Sun-Ok;Rhee, Joong-Yong
    • Journal of Bio-Environment Control
    • /
    • v.20 no.2
    • /
    • pp.93-100
    • /
    • 2011
  • Maintenance of adequate soil water potential during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement within and below the rooting zone can facilitate optimal irrigation scheduling aimed at minimizing the adverse effects of water stress on crop growth and development and the leaching of water below the root zone which can have adverse environmental effects. The objective of this study was to evaluate the feasibility of using a portable irrigation controller with an Watermark sensor for the cultivation of drip-irrigated vegetable crops in a greenhouse. The control capability of the irrigation controller for a soil water potential of -20 kPa was evaluated under summer conditions by cultivating 45-day-old tomato plants grown in three differently textured soils (sandy loam, loam, and loamy sands). Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30 cm depths. Even though a repeatable cycling of soil water potential occurred for the potential treatment, the lower limit of the Watermark (about 0 kPa) obtained in this study presented a limitation of using the Watermark sensor for optimal irrigation of tomato plants where -20 kPa was used as a point for triggering irrigations. This problem might be related to the slow response time and inadequate soil-sensor interface of the Watermark sensor as compared to a porous and ceramic cup-based tensiometer with a sensitive pressure transducer. In addition, the irrigation time of 50 to 60 min at each of the irrigation operation gave a rapid drop of the potential to zero, resulting in over irrigation of tomatoes. There were differences in water content among the three different soil types under the variable rate irrigation, showing a range of water contents of 16 to 24%, 17 to 28%, and 24 to 32% for loamy sand, sandy loam, and loam soils, respectively. The greatest rate increase in water content was observed in the top of 10 cm depth of sandy loam soil within almost 60 min from the start of irrigation.

A study on the comparison by the methods of estimating the relaxation load of SEM-pile (SEM파일의 이완하중 산정방법별 이완하중량 비교 연구)

  • Kim, Hyeong-Gyu;Park, Eun-Hyung;Cho, Kook-Hwan
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.20 no.3
    • /
    • pp.543-560
    • /
    • 2018
  • With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

A Study on the Effect of Irrigation Water Temperature to the Growth and Harvest of Paddy Rice in Various Water Sources (수원별 관개용수의 수온이 수함생육과 수량에 미치는 영향에 관한 연구)

  • 조형용
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.14 no.2
    • /
    • pp.2634-2648
    • /
    • 1972
  • The aim of this Study is to bring Light on the effect of irrigation water temperature to the growth and harvest of Paddy rice in Various water Sources. 1. This research was completed in the writer's home nursery garden Located in Chungyoung-Ri, Hoeng sung-Myun, Hoengusung-Konn, Kangwan-Do. 2. The variety of Paddy rice was the IR667. 3. Practice was done by the treatment I .e river water, reservoir, tube well cold and tuke well warm with 3 riplications each. 4. The Paddy was transplanted in a pot 0.9 meter height and 1 meter Square without hottom filled with paddy soil to a planting depth 0.5 meter. The pot was laid underground and Covered with a film of polyethylene to keep of the rain. 5. The method of Cultivation was that used by the Filed Crops Experiment Station of the Office of Rural Development. 6. Atmospheric temperature was recorded every day of the growing period. The precipitation and Sun light was quoted by the KF-46 of Hoengsung. 7. The Soils in the test plots was relatively fortile, being Similar to ordinary paddy soils. 8. The charactor of irrigation water of surface and underground was both normal. 9. During the period of growth the average temperature of the underground water as $14.2^{\circ}C$ and that of the Surface was $24.1^{\circ}$. 10. The most useful water for the rice growing was that of river and reservoir while underground water was found to be generally injurious to the paddy growth because of low temperature. 11. In the case of underground water, there proved to be such harmful effects as reduction of culm length, rate of mature grain, panicle Length and grain weight and delay of tillering time, and heading time. Reading Therefore the writer conduded that the harvest of rice irrigated with underground water Showed a reduction of 15.8% compered with the rice irrigated by surface water.

  • PDF

Antipodal Structuralization Strategy of Character Appearing in : Based on Psychological Functions of MBTI Personality Types Theory (<배가본드>에 나타난 캐릭터의 대척적 구조화 전략: MBTI 성격유형론의 심리기능에 근거하여)

  • Yang, Se-Hyeok;Kim, Dae-Gwon
    • Cartoon and Animation Studies
    • /
    • s.31
    • /
    • pp.117-152
    • /
    • 2013
  • is a comics that the original Yoshokawa Eiji's novel . Since the series started in 1998, it's epic that records the 54 million or more copies of the cumulative sales volume to 1.7 million unit volume average in the book, 34 are currently up to volume has been published. proceeds with narratives in a way of following naturally the personality of a character based on the rule of an author, which is 'people should be described as what they are'. Accordingly it features very unique characterizing. This study focused on the fact that numerous characters in maintain a structural balance through the establishment of a character composition in an antipodal relationship although those characters have strong personalities. In order to analyze the relationship of such characters, the study utilized as an analytic frame MBTI personality types theory which is a psychology test tool. First, the study inferred personality patterns as the temperamental characteristics of MBTI, and tried to analyze the antipodal character composition based on the combination of cognition and judgment which are assumably the most important functions. From this, the study was able to discover the following three structures applied to those characters. (1) The antipodism between Musasi, the main character and Kojiro, a mirror character becomes central to the work, (2) The antipodal relationship between their fosterers and the character playing the mentor's role extends the character attribute of Musasi and Kojiro. (3) The Yoshioka family was also established in the antipodal composition as a role of exchanging influences with Musasi and Kojiro. Through this, the study reached a conclusion that in the pairs of characters in contrast were established as if to reach a dialectic synthesis. As such, the antipodal structuralization of the character composition shown in is deemed to differentiate the inner sides of numerous unique characters; thereby make it possible to describe their inner sides in-depth. Finally, the following common context is found: works in the field of successful comics and animation in terms of criticism and performance are focused on characters. It is probably because their consumers are relatively very interested in those characters as the characters in comics or animation become differentiated from those of novels or movies. Subsequently, it is expected that the analyzed results of characterizing can be referred to during the production of contents by preparing the results as database.

Economic Feasibility of Hill Land Development (산지개발(山地開發)의 경제성)

  • Kim, Dong-Min
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.11 no.4
    • /
    • pp.283-295
    • /
    • 1979
  • A new Farmland Expansion and Development Promotion Law was enacted in 1975. This law authorizes the Government to undertake development within a declared "reclamation area", wherever the land owners are unable to do so. In order to give additional impetus to conversion of waste hilly land into productive farmland, these hilly land development projects were conducted as large scale scheme which include soil fertility improvements such as the application of lime and phosphate. Farmland Expansion and Development Promotion Corps has attempted to undertake annual farm surveys in order to obtain some information about hilly land agriculture and farming operations within the reclamation project areas since 1976. As survey data accumulates, more and more clear picture of hilly land farming come to appear and enable us to conduct in-depth study. Effects of such upland reclamation include converting of previously unproductive slopeland into cultivable farmland for lucrative and commercial farming or food production. Furthermore, idle or marginal resources such as farm labor, equipment and compost would be fully employed. Socio-economic effects would include increases in land value and attitude change of farmers. On the other hand the preservation of natural environments might be damaged to the some extend by the projects. As shown in Table 7, the average farm size increased from 3,156 pyeong($3.3m^2$) to 5,562 pyeong, a 76.2% increase. The proportion of small farms with less than I ha dropped from 59.8% to 34.4%, but that of the large farms over 2 ha rose from 13.1% to 32.0% (See Table 8). The survey results indicate that as the farming on reclaimed uplands become time-honored, the acreage devoted for food crop production decreases against the economic crop growing acreage (see Table 6). For example, in the case of uplands reclaimed in 1972, the ratio of food crop acreages decreased from 99.7% in 1972 to 62.5% in 1977, whereas that of economic crop acreages increased from 0.3% in 1972 to 37.5% in 1977. The government used to actively encourage the farmers to carry out food crop production in the reclaimed upland targting toward the realization of self-sufficiency in food grains. It is, however, apparent that the farmers did hardly take the government advises as far as their economic interest were concerned. Yield per 10a. of various crops from the reclaimed uplands by year were surveyed as seen in Table 12. On the average, barley production in the reclaimed areas achieved 83.3% of the average unit yield from the existing upland in its 5 th year. Soybean yields showed a modest increase from 64% in the first year to 95%, in the 5 th year. In contrast, economic crops such as red pepper, totacco and radish achieved their maximum target yields in 3 years from starting to cultivate on the reclaimed farms. In order to test the post economic viability, an economic analysis was performed for each of selected subprojects on the basis of the data obtained through survey. The average actual internal economic rate of return on upland reclamation investments was found to be 20.3% which exceeded other types of projects of land and water development such as tidal land reclamation, irrigation or paddy rearrangement. The actual IRRs of subcategories of upland reclamation projects varied from 17.9% to 21.4% depending upon the kinds of cropping system adopted in each reclaimed areas such as food, economic, fruit or forage crops.

  • PDF

Time-lapse crosswell seismic tomography for monitoring injected $CO_2$ in an onshore aquifer, Nagaoka, Japan (일본 Nagaoka의 육상 대수층에 주입된 $CO_2$의 관찰을 위한 시간차 시추공간 탄성파 토모그래피)

  • Saito, Hideki;Nobuoka, Dai;Azuma, Hiroyuki;Xue, Ziqiu;Tanase, Daiji
    • Geophysics and Geophysical Exploration
    • /
    • v.9 no.1
    • /
    • pp.30-36
    • /
    • 2006
  • Japan's first pilot-scale $CO_2$ sequestration experiment has been conducted in Nagaoka, where 10400 t of $CO_2$ have been injected in an onshore aquifer at a depth of about 1100 m. Among various measurements conducted at the site for monitoring the injected $CO_2$, we conducted time-lapse crosswell seismic tomography between two observation wells to determine the distribution of $CO_2$ in the aquifer by the change of P-wave velocities. This paper reports the results of the crosswell seismic tomography conducted at the site. The crosswell seismic tomography measurements were carried out three times; once before the injection as a baseline survey, and twice during the injection as monitoring surveys. The velocity tomograms resulting from the monitoring surveys were compared to the baseline survey tomogram, and velocity difference tomograms were generated. The velocity difference tomograms showed that velocity had decreased in a part of the aquifer around the injection well, where the injected $CO_2$ was supposed to be distributed. We also found that the area in which velocity had decreased was expanding in the formation up-dip direction, as increasing amounts of $CO_2$ were injected. The maximum velocity reductions observed were 3.0% after 3200 t of $CO_2$ had been injected, and 3.5% after injection of 6200 t of $CO_2$. Although seismic tomography could map the area of velocity decrease due to $CO_2$ injection, we observed some contradictions with the results of time-lapse sonic logging, and with the geological condition of the cap rock. To investigate these contradictions, we conducted numerical experiments simulating the test site. As a result, we found that part of the velocity distribution displayed in the tomograms was affected by artefacts or ghosts caused by the source-receiver geometry for the crosswell tomography in this particular site. The maximum velocity decrease obtained by tomography (3.5%) was much smaller than that observed by sonic logging (more than 20%). The numerical experiment results showed that only 5.5% velocity reduction might be observed, although the model was given a 20% velocity reduction zone. Judging from this result, the actual velocity reduction can be more than 3.5%, the value we obtained from the field data reconstruction. Further studies are needed to obtain more accurate velocity values that are comparable to those obtained by sonic logging.

Adaptation Process to Menopause (폐경에 대한 적응 과정)

  • 이미라
    • Journal of Korean Academy of Nursing
    • /
    • v.24 no.4
    • /
    • pp.623-634
    • /
    • 1994
  • Although the average menopausal age has not changed, women's life span has increased. Today's women live longer after their menopause than those in the past, and this calls for attention in both nursing and medical fields. Many studies have revealed how women reacted to menopause and suffered from it. But they did not discriminate the menopausal meaning and effects from the climacteric phenomena. So, this author tried to clarify what menopause itself meant to the climacteric women, by means of grounded theory methodology. The interviewees were 21 women, whose ages were between 46 and 60 years. They were selected by theoretical sampling technique, and the author tried to include all levels of important variables such as age, educational background, religion and job. Data were collected by the author through in -depth interviews and observations in July, 1994. The interviews were mostly done in the homes of the subjects, or in some cases at the author's office or in a hospital. Interviews took from 30 minutes to 2 hours. Interviews were tape recorded and transcribed later by a research assistant. Data were analyzed as gathered, by the constant comparative method proposed by Strauss and Corbin. Eleven concepts were discovered from the data, and they were grouped under six higher order categories. These six categories were "to give menopause a meaning", "to experience value change", "to have self-help strategies", "to have no strategies", "to live a life worth living", "to have a sense of powerlessness" Among these "to experionce value change" was . selected as the core category. Five major categories were systematically integrated around the core category. Women's adaptation to menopause was defined as proceeding as follows : Most women felt relief and sorrow at the same time when they faced menopause, and some only sorrow or agony. Then, they consulted with others about menopausal symptoms, or tried to think of them by themselves. Finally, they gave menopause a meaning, which was that menopause and its symptoms were natural phenomena. But menopause made women reflect on them-selves and their past lives. As they reflected on themselves, their value on life began to change. As their value changed, some women seeked self help strategies. Those self help strategies were what they had learned from collegues, professionals or mass media. The quality of their lives depended on whether they practiced self help strategies or not. Three types of lives were found. Twelve women enjoyed a life worth living, and practiced the self help strategies, because they accepted menopause a chance to change. They were characterized by a high educational level, having a professional job and a sincere faith in God. Seven women were living as usual, because they did not have the necessity to change. They were high school graduates and house wives. Two women recognized menopause a chance to change, but they did not try self help strategies. Their characteristic was low educational level. Those who did not try self help strategies complained of powerlessness to varying degrees. The educational background, full-time jobs and faith helped women adapt to menopause positively. But social support was not helpful to women's adaptation to menepause. Three hypotheses were derived from the analysis. (1) The higher the educational level, the more theneed to change. (2) Women with higher educational background will practice self help strategies more than those with lower edcational background. (3) The more women practice self help strategies, the worthier lives they will live. Suggestions for further studies are as follows. (1) Studies to test hypotheses are needed. (2) A study to find the relationship between the degree of practicing self help strategies and locus of control. (3) Spiritual approaches would better be applied to help menopausal women. (4) Education through mass media should be given mere frequently.

  • PDF

The effects of decalcification time of demineralized freeze-dried bone on the healing of 3-wall intrabony defects in dogs (탈회시간에 따른 탈회 냉동 건조골이식이 성견 3면 골내낭의 치유에 미치는 영향)

  • Kim, Chang-Sung;Cho, Kyoo-Sung;Kim, Chong-Kwan;Chai, Jung-Kiu
    • Journal of Periodontal and Implant Science
    • /
    • v.26 no.4
    • /
    • pp.779-797
    • /
    • 1996
  • The present study investigated the effects of variations in decalcification time of demineralized freeze-dried bone on the osteogenic potential of DFDB. Sixteen 3-wall intrabony defects with 4mm depth were surgically created in the mesial aspect of upper and lower anterior teeth of 4 dogs. Following the flap procedure, three test groups with 4 defects each received either freeze-dried bone graft (Group I), demineralized freeze-dried bone graft decalcified for 12hours (Group II), or demineralized freeze-dried bone graft decalcified for 24hours(Group III). The rest of the four defects received the flap procedure-only as the control group. The healing was histologically analyzed after 14 weeks on the length of connective tissue adhesion, new bone formation and new cementum formation. The results were as follows: 1. The length of connective tissue adhesion showed no statistically significant difference in all groups with $0.62{\pm}0.14mm$ for Control, $0.42{\pm}0.11mm$ for Group I, $0.63{\pm}0.43mm$ for Group II and $0.52{\pm}0.11mm$ for Group III. 2. The new bone formation showed no statistically significant difference in all groups with $3.17{\pm}0.24mm$ for Control. $3.15{\pm}0.56mm$ for Group I. $3.22{\pm}0.36mm$ for Group II, and $3.28{\pm}0.74mm$ for Group III. 3. The new cementum formation showed no statistically significant difference in all groups with $4.19{\pm}0.46mm$ for Control, $3.23{\pm}0.64mm$ for Group I, $4.13{\pm}1.82mm$ for Group II. and $3.13{\pm}0.62mm$ for Group III.

  • PDF

An in-vitro wear study of human enamel opposing heat-pressed ceramics (2종의 열가압 도재와 법랑질 간의 마모에 관한 연구)

  • Park, Chan-Yong;Jeon, Young-Chan;Jeong, Chang-Mo;Yun, Mi-Jung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.47 no.1
    • /
    • pp.21-28
    • /
    • 2009
  • Purpose: The purpose of this study was to compare the wear characteristics of human enamel opposing 2 heat-pressed ceramics (e.max Press and Empress Esthetic), conventional feldspathic porcelain (Ceramco 3) and type III gold alloy. Material and methods: Intact cusps of extracted premolars were used for enamel specimens. Five disk samples were made for each of two heat-pressed ceramics groups, conventional feldspathic porcelain group and type III gold alloy group. Wear tests were conducted in distilled water using a pin-on-disk tribometer. The amount of enamel wear was determined by weighing the enamel specimens before and after wear tests, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear characteristics. Results: 1. Ceramco 3 led to the greatest amount of enamel wear followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between Ceramco 3 and Empress Esthetic (P>.05), and there were also no significant differences among Empress Esthetic, e.max Press and type III gold alloy (P>.05). 2. The average surface roughness of e.max Press after wear test was smallest followed by Empress Esthetic and Ceramco 3, but there was no significant difference between Empress Esthetic and Ceramco 3 (P>.05). 3. There were no significant differences among the depth of wear tracks of all the groups (P>.05). The group that showed the largest width of wear track was Ceramco 3 followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between e.max Press and Empress Esthetic (P>.05), and there was also no significant difference between Empress Esthetic and Ceramco 3 (P>.05). Conclusion: Within the limits of this study, heat-pressed ceramics were not more abrasive than conventional feldspathic porcelain.