• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1645-1651
• /
• 2015

This paper describes the changes of shape accuracy in workpiece materials depending on the turning clearance angle. The experiments started from choosing three workpiece materials, SM45C(machine structural carbon steel), STS303(stainless steel) and SCM415 (chrome-molybdenum steel). The experiments showed specifically how features of selected materials changed when they were processed with diverse machining depths, 0.1 mm, 0.2 mm and 0.3 mm, with various negative angles, $0.0^{\circ}(-6.0^{\circ})$, $0.3^{\circ}(-6.3^{\circ})$ and $0.9^{\circ}(-6.9^{\circ})$, and called cutting edge inclination starting from a fixed rotational speed, 2,500 rpm, focusing on the feed rate, 0.07 mm/rev and 0.10 mm/rev. The results of the accuracy of processing, cylindricity, deviation from coaxiality, etc. were compared using the graph and table. The accuracy of cylindricity in the order of degree $0.0^{\circ}{\rightarrow}0.3^{\circ}{\rightarrow}0.9^{\circ}$ depending on the workpiece materials showed the best cylindricity when it was $0.9^{\circ}$. In conclusion, the accuracy improved in specific degrees irrespective of the quality of the materials when the bite negative angles increased. This means that workability improved in these experiments. In addition, the processing shape changed depending on depth of the cut and feed rate.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.193-204
• /
• 2007

Deformation strength($S_D$) is a property which shows relatively good correlation with rut resistance of asphalt mixtures at high temperature. The Asphalt Pavement Analyzer (APA) is widely used as an equipment for estimating rut resistance of asphalt mixtures. The APA was used as corresponding property of the $S_D$ to estimate rutting resistance of asphalt mixtures. Many data were collected to establish the correlation of $S_D$ with APA. For $S_D$ test, the specimen is submerged into the $60^{\circ}C$ water for 30 minutes before applying a vertical load at the speed of 50mm/min to obtain peak load (P) and deformation (y) for $S_D$ calculation. For the same materials, APA test was performed. Relation of the $S_D$ with APA rut depth was evaluated using regression analysis. The $R^2$ value was 0.76, indicating this simple test procedure being a possible method for predicting deformation resistance of asphalt concretes at high temperature. It was also shown that, using the regression model, minimum value(s) of $S_D$ of surface course asphalt mixture or binder course for a particular road level can be determined. The limit values may be possible to use as cut-off value(s) of asphalt mixtures for the layer after further elaborated studies.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.111-118
• /
• 2022

Recently, as underground facilities buried under roads in Korea are aging, the amount of underground facility maintenance work is rapidly increasing. For the maintenance and management of such underground facilities, the cutting work of the road pavement should be preceded. However, the conventional road pavement cutters used in Korea are not eco-friendly, and the reality is that they generate a lot of noise and cutting sludge (scattering dust). Therefore, in this study, the concept of the cutting sludge recovery device was derived, and an eco-friendly pavement cutter including this function was designed and manufactured. The developed equipment took about 20 to 30 seconds to cut 1m to a depth of 100 to 150mm. Also, the sludge suction performance was good in most sections, and the noise level of the equipment briefly measured at a distance of 2m was 82.7dB on average. However, due to the limitation that the developed equipment was at the level of the first prototype, the driving stability was somewhat low, and equipment abnormalities such as engine shutdown and sludge recovery performance decreased in some cases. The cutting performance and sludge recovery function will be more stable through tuning and improvement of the developed prototype in the future. In addition, we plan to quantitatively compare and analyze productivity by applying the improved prototype to actual field conditions.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.121-132
• /
• 2009

Thin bonded continuously reinforced concrete overlay(CRCO) was constructed on He existing jointed plain concrete pavement(HCP) surface at Seo-Hae-Ahn express highway in South Korea in order to evaluate its applicability and performance. Two sections of road were considered for this evaluation. In the first section, the concrete overlayer was placed and cut down to the existing layer to form transverse joints while CRCO was constructed on top of the existing layer in the second section. Early strength concrete(Type III) was utilized for both overlay sections. The depth of milling and the thickness of overlaid layer were 5 cm and 10 cm, respectively. Several vibrating wire gauges(VWG) were installed to evaluate the performance of CRCO with respect to curling, delamination, and crack propagation. As a result of the strength test, it was found that strength of the material reaches the design criteria within 1-3 days. Analysis with vibrating wire gauge(VWG) showed CRCO effectively restricts joint movement. High adhesive strength also was observed from the material regardless of length of aging. Meanwhile, transverse cracks were observed on the middle of the section where JPCP overlay was applied whereas arbitrarily cracks in transverse direction were observed on the section where CRCP was applied.

• Korean Journal of Social Welfare
• /
• v.36
• /
• pp.71-99
• /
• 1998

There is a general consensus that fate of the differentiated welfare state had fallen into the brink of demise during the 1970s while the integrated welfare state model has emerged instead. Indications are all that such trend spotlights occupational welfare which has been relatively neglected, especially, in the field of social welfare. Nevertheless, the occupational welfare system in Korea faced crisis due to two major incidents. One is the IMP crisis which necessitates massive scale of restructuring of the general fabric of the Korean business and industry. There is little doubt that the economic crisis will surely cut down occupational welfare expenditure substantially. The other is a report released by the Korean Labor Research Institute which argus that there is no correlation between the Korean occupational welfare system and labor productivity. Thorough investigation of the Korean occupational welfare system suggests that current system is so outdated that it doesn't meet needs of the industrial workforce which, in turn, fails to enhance workers productivity. Consequently, a need for new paradigm and system arises and employee assistance program(EAP) emerges as a viable alternative. EAP is thoroughly delianeated of it's definition, motivations, functions, ingredients, historical background as well as cost-effectiveness. But major tasks center around an investigation and an analysis of it's applicability. In-depth analysis was carried out on the issue of it's indispensable natures and stumbling blocks on the way to lay it's root in the Korean industrial environment. It seems harder than the herculean task. However, EAP is not simply an alternative but is rather a pressing imperative for the present occupational welfare system in Korea which stands at the crossroad.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.103-110
• /
• 2022

This study is a paper on the recognition of college students about the long-take shot technique which is often used to give a sense of reality and realism to films. 13 surveys were conducted on 92 students, including their perception of long-take films, their feelings after watching the film, satisfaction, and future prospects. Participants in the surveys consisted of 23 students in the health field, 16 students in the natural field, 41 students in the arts and sports field, and 13 students in the engineering field. As a result of the surveys, 68.8% of students answered "I know" about long-take film, and the feeling after watching the long-take film was found in the order of reality (realism) 68.8%, tension 16.1%, and boredom 15.1%. After watching the long-take film, 16.1% of students chose "Very satisfied" and 31.2% chose "Satisfied". Future prospects for long-take film showed high with 17.2% for "It will be developed very much" and 48.4% for "It will be developed". Preference for long-take film and general film was 67.7% for "long-take film" and 32.3% for "general film", showing high preference for long-take film. As a further research project, more in-depth surveys will be conducted targeting broadcasting & media contents majors in their 20s, and the long-take films used according to the story development process in domestic films will be analyzed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.124-127
• /
• 2005

It is demonstrated that the annealing process for Ti in-diffusion to z-cut $LiNbO_3$ at temperature lower than the curie temperature in a platinum (Pt) box can cause a ferroelectric micro-domain inversion at the +z surface and Li out-diffusion, therefore which should be avoided or suppressed for waveguide type periodically poled lithium niobate (PPLN) devices. The depth of the inversion layer depends on the Ti-diffusion conditions such as temperature, atmosphere, the sealing method of $LiNbO_3$ in the Pt box and crystal orientation is experimentally examined. The result shows that the polarization-inverted domain boundary appears at the only +z surface and its thickness is about $1.6{\mu}m$. Also, for the etched $LiNbO_3$, surface the domain shape was observed by the optical microscope and atomic force microscopy (AEM), and distribution of the cation concentrations in the $LiNbO_3$ crystal by the secondary ion mass spectrometry (SIMS).

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.1-14
• /
• 1970

The following results were obtained by surveying the productivity of mulberry fields in Korea. 1. The productivity of mulberry field per 10a in which cocoon can be yield belongs to the range of 9.8∼105kg, and among them the productivity of 20 to 60kg was chiefly distributed. And their average was 50.2kg. 2. In general, the larger the mulberry field in scale per a person is, the lower the productivity of it is, but about 6.6 ares per a person was estimated to be economic scale for high productivity. 3. As far as the texture of soil is concerned, sandy-loam and loam contained a capacity of higher productivity while others like clay and sand that of lower productivity, And the depth of surface soil must be at least 50cm, although 70cm's depth of surface sail could bring about high productivity. 4. Fertilization of 900kg's compost on planting and 1,200kg's that after planting could enhance the productivity, because the use of compost have a positive relation to the productivity. 5. The greater the number of farmer's domestic animals is as a source of organic matter the higher the productivity is. 6. In the case of fertilization of 1,200kg compost, the amount of 20kg's nitrogen per 10 ares as chemical manure was best for high productivity. However, fertilization of 14.7kg's nitrogen as average amount of that, which is far below the standard amount, had been a factor to reduce the productivity of mulberry field. 7. In pruning the low-cut form resulted in high productivity, but as their shape become taller due to the lack of techniques, they were turned out to be non head pruning, thus to produce poor harvest of leaves. 8. The pure mulberry fields showed better productivity than others such as wide and narrow ridge planting and inter-crop planting. 9. As for the degree of planting density, at least 800 trees per 10 ares should be planted to increase the productivity, although the planting of 713 trees per 10 ares could be possible in case of the low stemmed pruning. 10. The hole and tranch in planting must be digged as wider and dipper as possible far the better growth of mulberry tree. 11. On the whole, varieties like NOsang and Y oung-cheun choowoo had a tendency of lower productivity.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.42-59
• /
• 2017

To investigate rooting and community forming ability, sod strips of Gramineae such as Miscanthus sacchariflorus (Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg., and Arundinella hirta(Thunb.) Tanaka were planted horizontally at a width of 10~15cm in October 2010 on the bank slope of Kwangju Stream in Korea. Seeds of each species were sown in April 2010 in plastic seedbeds(60cm length ${\times}$ 30cm width ${\times}$ 5cm depth) filled with 4cm of garden soil and grew until October 2010 to form rectangular sod, which then was cut into multiple strips(20cm length ${\times}$ 6cm width ${\times}$ 4cm root depth). Weeds growing on the experiment sites were removed twice a year until those four species had formed a community by 2013. Weeds were not eradicated during 2014 and 2015 to observe whether the community formation can be maintained without weed removal. t-tests on stem numbers and heights in May, July, and September were conducted between 2013 and 2014, and between 2014 and 2015. Stem numbers and heights of the four species in 2014 were significantly decreased(p<0.001) compared with those in 2013 due to weed damage to their growth in 2014. Stem numbers and heights of Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. in 2015 were similar to those in 2014(p>0.05). Stem numbers and heights of Arundinella hirta(Thunb.) Tanaka in 2015, however, were significantly reduced compared with those in 2014(p<0.001) due to weed impact on its growth. After three years of weed removal, a community of each species was formed. Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. were able to establish communities without any further weed removal. Arundinella hirta(Thunb.) Tanaka, however, was not able to maintain its community due to considerable damage to its growth caused by weeds even after three years of weed removal. Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. are more suitable to sod strip plantings on stream bank slopes in terms of the maintenance of community formation without weed eradication. t-test on stem numbers and heights each September during the five year experiment period between sod strip planting and potted plants of the four species were conducted. Stem numbers of strip sod plantings were significantly higher(p<0.001) than those of potted one. Heights of strip sod plantings, however, were significantly lower(p<0.05) than those of the potted samples. Therefore, strip sod planting is more advantageous regarding bank slope erosion protection due to the higher number of stems.