• 디지털콘텐츠학회 논문지
• /
• 제13권3호
• /
• pp.271-278
• /
• 2012

적외선 기반 깊이 센서는 최근 저렴해진 가격으로 인해 소비자용으로 널리 보급되고 있으며 원래 목적을 넘어서 방송용 가상 스튜디오 제스처 인식을 포함한 다양한 분야로까지 적용 범위를 확대하고 있다. 그러나 이러한 방송 스튜디오 환경에서는 깊이 센서와 간섭을 일으키는 적외선이 다량 방출되어 올바른 깊이 정보의 포착이 불가능한 문제가 발생한다. 본 논문에서는 특정 적외선 파장대를 사용하는 깊이 센서가 적외선 방출 광원 하에서 간섭이 발생하는 원리에 대해 분석하고 깊이 센서의 올바른 작동을 보장하기 위한 필터링 기법을 논의한다. 또한 여러 차단 주파수대를 가지는 통과 필터를 적용하는 실험방법과 그 결과를 제시하며 올바른 대역 통과 필터를 적용함으로써 조명에서 방출되는 적외선을 차단하고 효과적으로 깊이 정보를 포착할 수 있다는 사실을 실험적으로 증명한다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권3호
• /
• pp.175-182
• /
• 2017

In this paper, we present a multi-depth generation method using a time-of-flight (ToF) fusion camera system. Multi-view color cameras in the parallel type and ToF depth sensors are used for 3D scene capturing. Although each ToF depth sensor can measure the depth information of the scene in real-time, it has several problems to overcome. Therefore, after we capture low-resolution depth images by ToF depth sensors, we perform a post-processing to solve the problems. Then, the depth information of the depth sensor is warped to color image positions and used as initial disparity values. In addition, the warped depth data is used to generate a depth-discontinuity map for efficient stereo matching. By applying the stereo matching using belief propagation with the depth-discontinuity map and the initial disparity information, we have obtained more accurate and stable multi-view disparity maps in reduced time.

• 센서학회지
• /
• 제29권2호
• /
• pp.123-127
• /
• 2020

In this paper, the estimation of the disparity for depth extraction in monochrome complementary metal-oxide-semiconductor (CMOS) image sensors with offset pixel apertures is presented. To obtain the depth information, the disparity information between two different channel data of the offset pixel apertures is required. The disparity is caused by the difference in the response angle between the left- and right-offset pixel aperture images. A depth map is implemented by the generated disparity. Therefore, the disparity is the most important factor for realizing 3D images from the designed CMOS image sensor with offset pixel apertures. The disparity is influenced by the pixel height and offset value of the offset pixel aperture. To confirm this correlation, the offset value is set to maximum within the pixel area, and the disparity values corresponding to the difference in the heights are calculated and compared. The disparity is derived using the camera-lens formula. Two monochrome CMOS image sensors with offset pixel apertures are used in the disparity estimation.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.270-274
• /
• 2015

In this paper, we propose an improved framework to analyze an N-ocular imaging system under fixed constrained resources such as the number of image sensors, the pixel size of image sensors, the distance between adjacent image sensors, the focal length of image sensors, and field of view of image sensors. This proposed framework takes into consideration, for the first time, the defocusing effect of the imaging lenses according to the object distance. Based on the proposed framework, the N-ocular imaging system such as integral imaging is analyzed in terms of depth resolution using two-point-source resolution analysis. By taking into consideration the defocusing effect of the imaging lenses using ray projection model, it is shown that an improved depth resolution can be obtained near the central depth plane as the number of cameras increases. To validate the proposed framework, Monte Carlo simulations are carried out and the results are analyzed.

• 전기학회논문지
• /
• 제67권8호
• /
• pp.1080-1088
• /
• 2018

General methods of controlling a drone are divided into manual control and automatic control, which means a drone moves along the route. In case of manual control, a man should be able to figure out the location and status of a drone and have a controller to control it remotely. When people control a drone, they collect information about the location and position of a drone with the eyes and have its internal information such as the battery voltage and atmospheric pressure delivered through telemetry. They make a decision about the movement of a drone based on the gathered information and control it with a radio device. The automatic control method of a drone finding its route itself is not much different from manual control by man. The information about the position of a drone is collected with the gyro and accelerator sensor, and the internal information is delivered to the CPU digitally. The location information of a drone is collected with GPS, atmospheric pressure sensors, camera sensors, and ultrasound sensors. This paper presents an investigation into drone control by a remote computer. Instead of using the automatic control function of a drone, this approach involves a computer observing a drone, determining its movement based on the observation results, and controlling it with a radio device. The computer with a Depth camera collects information, makes a decision, and controls a drone in a similar way to human beings, which makes it applicable to various fields. Its usability is enhanced further since it can control common commercial drones instead of specially manufactured drones for swarm flight. It can also be used to prevent drones clashing each other, control access to a drone, and control drones with no permit.

• 제어로봇시스템학회논문지
• /
• 제21권11호
• /
• pp.1003-1007
• /
• 2015

Depth calibration is a procedure for finding the conversion function that maps disparity data from a depth-sensing camera to actual distance information. In this paper, we present an optimal depth calibration method for Kinect$^{TM}$ sensors based on an experimental design and convex optimization. The proposed method, which utilizes multiple measurements from only two points, suggests a simplified calibration procedure. The confidence ellipsoids obtained from a series of simulations confirm that a simpler procedure produces a more reliable calibration function.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1189-1204
• /
• 2018

Detecting and capturing 3D human structures from the intensity-based image sequences is an inherently arguable problem, which attracted attention of several researchers especially in real-time activity recognition (Real-AR). These Real-AR systems have been significantly enhanced by using depth intensity sensors that gives maximum information, in spite of the fact that conventional Real-AR systems are using RGB video sensors. This study proposed a depth-based routine-logging Real-AR system to identify the daily human activity routines and to make these surroundings an intelligent living space. Our real-time routine-logging Real-AR system is categorized into two categories. The data collection with the use of a depth camera, feature extraction based on joint information and training/recognition of each activity. In-addition, the recognition mechanism locates, and pinpoints the learned activities and induces routine-logs. The evaluation applied on the depth datasets (self-annotated and MSRAction3D datasets) demonstrated that proposed system can achieve better recognition rates and robust as compare to state-of-the-art methods. Our Real-AR should be feasibly accessible and permanently used in behavior monitoring applications, humanoid-robot systems and e-medical therapy systems.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.141-150
• /
• 2013

This study proposes technology using Active Shape Model to track the object separating it by depth-sensors. Unlike the common visual camera, the depth-sensor is not affected by the intensity of illumination, and therefore a more robust object can be extracted. The proposed algorithm removes the horizontal component from the information of the initial depth map and separates the object using the vertical component. In addition, it is also a more efficient morphology, and labeling to perform image correction and object extraction. By applying Active Shape Model to the information of an extracted object, it can track the object more robustly. Active Shape Model has a robust feature-to-object occlusion phenomenon. In comparison to visual camera-based object tracking algorithms, the proposed technology, using the existing depth of the sensor, is more efficient and robust at object tracking. Experimental results, show that the proposed ASM-based algorithm using depth sensor can robustly track objects in real-time.

• 대한전자공학회논문지SD
• /
• 제42권1호
• /
• pp.19-24
• /
• 2005

본 논문에서는 압저항 효과를 이용한 Si 압력센서 제작을 최적화하였다. Si 압저항형 압력센서의 제작공정에 있어서 압저항과 알루미늄 회로 패턴 이후에 Si 이방성 식각을 통하여 수율이 개선되었다. 압저항의 위치와 공정 파라메터는 각각 ANSYS와 SUPREME 시뮬레이터를 이용하여 결정하였다. Boron-depth 프로파일 측정으로부터 p-형 Si 압저항의 두께를 측정한 결과 SUPREME 시뮬레이션으로부터 얻은 결과와 잘 부합하였다. 다이아프램을 위한 Si 이방성 식각 공정은 암모늄 첨가제 AP(Ammonium persulfate)를 TMAH(Tetra-methyl ammonium hydroxide) 용액에 첨가함으로써 최적화되었다.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.314-321
• /
• 2022

Depth information used in SLAM and visual odometry is essential in robotics. Depth information often obtained from sensors or learned by networks. While learning-based methods have gained popularity, they are mostly limited to RGB images. However, the limitation of RGB images occurs in visually derailed environments. Thermal cameras are in the spotlight as a way to solve these problems. Unlike RGB images, thermal images reliably perceive the environment regardless of the illumination variance but show lacking contrast and texture. This low contrast in the thermal image prohibits an algorithm from effectively learning the underlying scene details. To tackle these challenges, we propose multi-channel remapping for contrast. Our method allows a learning-based depth prediction model to have an accurate depth prediction even in low light conditions. We validate the feasibility and show that our multi-channel remapping method outperforms the existing methods both visually and quantitatively over our dataset.