• 디지털콘텐츠학회 논문지
• /
• 제16권1호
• /
• pp.127-135
• /
• 2015

입체영상 디스플레이 제조 및 콘텐츠 저작 소프트웨어 기술의 발달은 3차원 입체영상의 응용 분야를 특수한 가상시뮬레이션의 응용 분야에서 주변에서 흔히 접할 수 있는 영화, 게임, 광고, 전시 등 다양한 분야로 확장시키고 있다. 하지만, 현존하는 양안시차 원리 기반의 입체영상은 시청자에게 피로감을 유발시킨다. 양안시차에 의한 깊이 인지와 피로감 사이의 관계를 도출하기 위해 시청자 실험 기반의 연구가 활발히 진행되고 있으며, 현재 3차원 입체영상 제작 및 시청 가이드라인의 결과물들이 제시되고 있다. 또한, 입체영상 기술은 과다 깊이 제공을 통한 몰입도 증대의 제작자 측면과 허용 범위 내의 최소 피로 추구의 시청자 측면의 상반되는 목적성을 갖고 있다. 본 연구는 3D입체영상 제작 및 가이드라인에 기초가 되는 깊이 변화도 중심의 분석 데이터를 제공한다. 입체영상 제작자 측면에서 활용 가능한 안정적 깊이 변화 구간과 장면 간 깊이 변화의 속도 기준을 도출하였으며, 시청자 측면에서는 뇌파 장치를 활용하여 깊이 변화 적응 시간에 대한 기준 값을 제시하였다.

• 재무관리연구
• /
• 제26권4호
• /
• pp.141-163
• /
• 2009

Using the extensive datasets, I analyze the effect of tick size changes on the intraday patterns of spread and depth. I show that intraday variations in spread (depth) are greater (smaller) with smaller tick size during the early hour of trading and become smaller (larger) during the last hour of trading. And the standardized spreads (depths) are quoted at the lower (higher) levels as the tick size becomes smaller. I also find that U-shaped intraday spread pattern changes to the reverse flat S-shape while inverted U-shaped depth pattern does to the flat S-shape.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2007

The purpose of this study was to grasp actual condition of remodeling elements by specialists' in-depth interviews. The interview has been conducted to interior designer who have a wide experience of apartment remodeling. In-depth interview is a kind of qualitative method in which attention to reply of responses with open-access between interviewer and respondents. According to the results, remodeling elements were generally the renovation of balcony into the livingroom or children room, removal a doorsill, installation of storage furniture, change of lighting fixtures in the all rooms and change equipments of bathroom. Finishing materials were usual used normal wallpaper and normal or low emitting adhesive on ceiling and wall, tempered-flooring on floor, and ceramic tiles on bottom and wall of bath and entrance.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.207-212
• /
• 2011

In this study, the change in diffusion coefficient and wear characteristic with depth in the carbonitriding layer of SCM415 steel was discussed. To determine the diffusion coefficient, depth profile of carbon was measured from the surface using the Glow Discharge Spectrometer. In otherwise, measurements of carbide fraction, micro vickers hardness of surface and observation of microstructure have been implemented through the SEM image. $Fe_3$(C,N) layer and effective depth were increased as the time for carbonitriding takes longer. According to wear experiment, the results showed that wear resistance was improved by $Fe_3$(C,N) layer and effective depth.

• Journal of Periodontal and Implant Science
• /
• 제28권3호
• /
• pp.523-531
• /
• 1998

The purpose of this investigation was to examine the pattern of progression of periodontitis and the change in the extent and severity of the periodontal condition in young adults. Fourteen subjects with periodontitis, 11 males and 3 females in the age range 22-26, participated in the study. Following a baseline examination, the subjects were monitored for gingival index, probing pocket depth, gingival recession, probing attachment level and radiogrphic crestal bone height for 24 months without therapy. Re-examination were performed after 12 and 24 months. Gingival index, probing pocket depth, gingival recession and probing attachment level were assesed at 6 locations per tooth, and crestal bone height was assessed by subtraction radiography. The results from the follow-up examination revealed that the subjects underwent minor changes with respect to a series of different clinical parameters. The mean values of gingival index was improved, however, the mean values of probing pocket depth, gingival recession, probing attchment level and crestal bone height showed no significant change between baseline and the re-examination after 1 and 2 years.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.73-78
• /
• 2000

This paper describes the effect of span-to-depth ratio, which describes aspect of cell formed with top diaphragm steel plate, on capacity in composite steel-concrete structure of sandwich system. The span-to-depth ratio \ulcorner load-carrying mechanism and load-distribution capacity of structure. Therefore, stress levels of members and load-resis\ulcorner of system vary according to span-depth ratio. In this study, numerical nonlinear analysis was performed to various ratio for two types(MA, MB) composite structure of sandwich system to analyze the influence of span-to-depth ratio or, behavior. The difference of load-carrying mechanism and stress of members results from analysis results, then bas\ulcorner differences, the effects of span-to-depth ratio on shear capacity, flexural capacity and load-resistance capacity were analyze effects on failure mode and ductility were briefly. As a results of this study, as span-to-depth ratio increases, \ulcorner bottom steel plate and concrete lower. This implies an increase in effective flexural and shear capacity. Therefore lo\ulcorner capacity of structure improves as span-to-depth ratio increases, Especially, the effect is greate in shear than flexural span-to-depth ratio increases, this difference between flexural and shear capacity may change failure mode and ductility. span-to-depth ratio increases capacity increases more than flexural capacity, we should expect that structural behavior mode gradually change from shear to flexural and ductility of structure gradually improves.

• 한국제4기학회:학술대회논문집
• /
• 한국제4기학회 2002년도 한몽 제1차 합동세미나 발표요지
• /
• pp.66-67
• /
• 2002

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.116-124
• /
• 2008

본 연구에서는 원형수직구 굴착에 따른 Ring Beam의 거동을 평가하기 위하여 현장계측 자료의 분석과 평가, 굴착심도 변화에 따른 Ring Beam의 응력 특성 등의 비교분석을 구조해석에 기초하여 평가하였다. 그 결과, Ring Beam의 거동은 현장계측 및 구조해석 결과에서 유사한 경향을 나타내는 것을 알 수 있었다. 이로부터 굴착심도 변화에 따른 Ring Beam 거동은 본 연구에서 제안한 구조해석에 의해 예측할 수 있는 것을 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권2호
• /
• pp.131-139
• /
• 2016

Recognition of human motions has become a main area of computer vision due to its potential human-computer interface (HCI) and surveillance. Among those existing recognition techniques for human motions, head detection and tracking is basis for all human motion recognitions. Various approaches have been tried to detect and trace the position of human head in two-dimensional (2D) images precisely. However, it is still a challenging problem because the human appearance is too changeable by pose, and images are affected by illumination change. To enhance the performance of head detection and tracking, the real-time three-dimensional (3D) data acquisition sensors such as time-of-flight and Kinect depth sensor are recently used. In this paper, we propose an effective feature extraction method, called adaptive local binary pattern (ALBP), for depth image based applications. Contrasting to well-known conventional local binary pattern (LBP), the proposed ALBP cannot only extract shape information without texture in depth images, but also is invariant distance change in range images. We apply the proposed ALBP for head detection and tracking in depth images to show its effectiveness and its usefulness.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.433-439
• /
• 2014

Beam quality is changed about magnetic field of bending magnet. Evaluation of beam quality using PDD(Percentage Depth Dose) at 10cm depth at recommendation of AAPM(America Academy of Pain Medicine). However this evaluation shows fragmentary element. Therefore this study is applied to three value, 10cm divided by 5cm depth PDD, 20cm divided by 10cm depth PDD, 30cm divided by 20cm depth PDD, at change the magnetic field. PDD is measured at magnetic field changed ${\pm}1%$, ${\pm}2%$ at 6MV(Mega Voltage), 10MV photon. The plan technique is 3 portal plan using Core-Plan at human pelvic phantom. Conventional and presented methods are compared at maximum and minimum dose. The presented method increased discernment of relieve the unequal distribution and energy area than conventional method. Henceforth, application of presented method will be considered. Development of energy measurement method and detector miniaturization will be needed about continuous study.