• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.131-136
• /
• 1999

Yttria stabilized zirconia(YSZ) films were deposited on porous NiO substrates and quartz plates by the thermal CVD using $ZrCl_4, YCl_3$ as precursors, and $O_2$ as a reactive gas at atmospheric pressure. The evaporation temperature of $ZrCl_4$ was varied from $250^{\circ}C$ to $550^{\circ}C$ while the temperatures of $YCl_3$ and the substrate were varied from $1000^{\circ}C$ to $1030^{\circ}C$. As the evaporation temperature of $ZrCl_4$ increased, the deposition rate of $ZrO_2$ decreased, contrary to our expectation. As a result of the decreased deposition rate of $ZrO_2$, the yttria content increase. The high evaporation temperature of $ZrCl_4$ makes the well-faceted crystal while the low evaporation temperature leads to the cauliflower-shaped structure. The dependence of the evaporation temperature on the growth rate and the morphological evolution was interpreted by the charged cluster model.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.188-203
• /
• 2021

The specific benefits of the modified films formed on preliminary anodized aluminum, including the versatility of their potential applications impose the need for evaluation of the exploitation reliability of these films. In this aspect, the durability of Cu and Ni modified anodized aluminum oxide (AAO) films on the low-doped AA1050 alloy was assessed through extended exposure to a 3.5% NaCl model corrosive medium. The electrochemical measurements by means of electrochemical impedance spectroscopy (EIS) and potentiodynamic scanning (PDS) after 24 and 720 hours of exposure have revealed that the obtained films do not change their obvious barrier properties. In addition, supplemental analyses of the coatings were performed, in order to elucidate the impact of the AC-deposition of Cu and Ni inside the pores. The scanning electron microscopy (SEM) images have shown that the surface topology is not affected and resembles the typical surface of an etched metal. The subsequent energy dispersive X-ray spectroscopy (EDX) tests have revealed a predominance of Cu in the combined AAO-Cu/Ni layers, whereas additional X-ray photoelectron (XPS) analyses showed that both metals form oxides with different oxidation states due to alterations in the deposition conditions, promoted by the application of AC-polarization of the samples.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.579-584
• /
• 2000

Single crystal silicon (SCS) is used in a variety of microsensor applications in which stresses and other mechanical effects may dominate device performance. The authers model temperature dependent mechnical properties during focused io beam(FIB) cutting and Pt deposition processes. In microaccelero-meter manufacturing process, this paper intend to find thermal displacement change of the temperature by tunnel gap, additional beam part and pt deposition. The thermal analysis intend to use ANSYS V5.5.3.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 춘계학술대회 논문집
• /
• pp.245-246
• /
• 2000

공기중의 오염 입자가 인체에 얼마나 많은 영향을 미치는가는 흡입된 입자 (inhaled particles) 중에서 얼마나 많은 양이 폐 (lung)에 침전되는가와 밀접한 관계가 있다. 또한 정상 및 비정상 (diseased) 폐에서, 흡입된 입자의 침전 위치와 침전양 (deposition site and dose)은 입자의 크기와 호흡 양식(breathing pattern)에 따라 큰 차이를 보이며, 이런 차이는 흡입오염입자 (inhaled pollutant particles)에 의한 건강 위험도 평가 (health risk assessment) 및 흡입용 약물 (inhaled drug aerosols)의 치료효과(therapeutic effects) 평가 등에 큰 영향을 미친다. (중략)

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.796-799
• /
• 2002

BSCCO thin films are fabricated via a co-deposition process at an ultra-low growth rate using ion beam sputtering. The sticking coefficient of Bi element exhibits a characteristic temperature dependence. This temperature dependence of the sticking coefficient was explained consistently on the basis of the evaporation and sublimation processes of Bi$_2$O$_3$.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.965-974
• /
• 2013

2011년 7월 27일 우면산 유역에서 일련의 토석류가 발생하여 많은 인명과 재산 피해를 야기했다. 이러한 토석류 피해를 저감하기 위해서는 토석류가 어떻게 이동하고 퇴적되어 하류부에 피해를 주는지를 예측할 수 있는 기술이 필요하다. 이 연구에서는 우면산 토석류에 대해서 FLO-2D 수치모형을 적용하여, 모형의 성능을 평가하고, 이들 토석류의 유동 매개변수를 분석하였다. 우면산 북측사면에서 발생한 토석류의 현장 관측자료와 FLO-2D 모의 결과 분석을 통해서 역산된 우면산 토석류의 대표 항복응력은 1,022 Pa 그리고 대표 동점성은 652 $Pa{\cdot}s$ 인 것으로 나타났다. 선정된 매개변수를 이용하여 우면산 토석류의 퇴적영역을 산정한 결과, 래미안 유역의 경우 63 - 85% 정확도의 피해유역을 재현됨으로서 FLO-2D 모형은 피해유역 산정에 적합한 것으로 나타났다. 하지만, FLO-2D 모형이 침식물질과 우수의 연행작용을 고려할 수 없는 고유의 한계 때문에 연행작용이 현저한 래미안 및 신동아 유역 토석류의 유하속도는 과소평가하는 것으로 나타났다. 유하부에서 침식에 의한 연행작용이 활발하지 않은 형촌마을 유역 토석류는 수로와 저수지 상부 부근에서의 퇴적을 우수한 정확도로 모의되었다. 민감도 분석 결과 유사체적농도와 바닥조도계수 모두 토석류의 흐름두께와 유속 모두에 상당한 영향을 미치는 것으로 나났으므로, 이들 매개변수의 선정에 신중해야 함을 보여주었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.407-412
• /
• 1997

The predictive results between a dynamic food-chain model (DYNACON) and an equilibrium model (NRC model) were compared to show the physical validity of DYNACON. Although the mathematical formulations and transport processes of radionuclides in the environment are different between two models, the comparative study shows good agreement for deposition events that occur during the growing season of plants.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.715-723
• /
• 2012

낙동강의 지류인 내성천의 회룡포는 섬 안의 섬으로 불리는 모래 백사장을 가지고 있는 매우 잘 알려진 관광명소이다. 그러나 상류 지역 댐의 건설이 계획되었다. 따라서 상류로 부터의 유사 유입이 차단되게 되었다. 이러한 상황에서 내성천의 지류로부터 유입되는 유사량 등을 통하여 회룡포의 모래 백사장에 미치는 영향을 1차원 및 2차원 모형을 사용하여 분석하였다. 유량-유사량은 댐의 유지유량과 지류에서 들어오는 유사량의 유역면적비에 의해서 산정된 값을 입력 자료로 활용 하였다. 1차원 모형은 HEC-6 모형을 사용하였고 2차원 모형은 SMS의 SED2D 모형을 사용하여 분석하였다. HEC-6 모형은 10년 전 하상에 데이터를 넣어 현재 하상과 가장 일치하는 공식인 Yang공식을 선정하여 현재 하상으로부터 20년 후를 모의하였다. SED-2D 모형은 현재 하상을 기준으로 20년 후를 모의하였고 두 모형 분석 결과 회룡포 구간에서는 동일한 양상이 나타나는 것으로 확인되었다.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2881-2892
• /
• 2024

Annular flow refers to a special type of two-phase flow pattern in which liquid flows as a thin film at the periphery of a pipe, tube, or conduit, and gas with relatively high velocity flows at the center of the flow section. This gas also includes dispersed liquid droplets. The liquid film flow rate continuously changes inside the tube due to two processes-entrainment and deposition. To determine the liquid holdup, pressure drop, the onset of dryout, and heat transfer characteristics in annular flow, it is important to have proper knowledge of flow characteristics. Especially a better understanding of entrainment fraction is important for the heat transfer and safe operation of two-phase flow systems operating in an annular two-phase flow regime. Therefore, the objective of this work is to develop a computational model for the simulation of the annular two-phase flow regime and assess the various existing models for the entrainment rate. In this work, Computational Fluid Dynamics (CFD) in ANSYS FLUENT has been applied to determine annular flow characteristics such as liquid film thickness, film velocity, entrainment rate, deposition rate, and entrainment fraction for various gas-liquid flow conditions in a vertical upward tube. The gas core with droplets was simulated using the Discrete Phase Model (DPM) which is based on the Eulerian-Lagrangian approach. The Eulerian Wall Film (EWF) model was utilized to simulate liquid film on the tube wall. Three different models of Entrainment rate were implemented and assessed through user-defined functions (UDF) in ANSYS. Finally, entrainment for fully developed flow was determined and compared with the experimental data available in the literature. From the simulations, it was obtained that the Bertodano correlation performed best in predicting entrainment fraction and the results were within the ±30 % limit when compared to experimental data.

• 한국대기환경학회지
• /
• 제26권1호
• /
• pp.34-47
• /
• 2010

Long-range transport of air pollutants was simulated using Comprehensive Acid Deposition Model (CADM) and Yonsei University-Sulfuric Acid Deposition Model (YU-SADM). For the simulation, weather patterns that represent the four seasons were derived through a clustering analysis with 5-years of meteorological data. The simulation result showed that in spring, influenced by strong low pressure from China, air pollutants of moved to the Korean Peninsula. In summer, humid air moved into the Korean Peninsula across the Yellow Sea while the north pacific high pressure extended, making the concentration of air pollutants lower than that in the other seasons. In autumn, air pollutants were transported by the northwest wind caused by the movement of high pressure over the Yellow Sea, while in winter air pollutants were influenced by northwest winds from continental highs. The amount of air pollutants in each season showed that high amount of pollutants were transported in winter due to the strong northwest wind. The in-flows were 3 to 8 times higher than those of the other seasons, and out-flows were about as twice as high. The amount of wet deposition in summer and autumn increased significantly compared to the amount in the other seasons due to the increase of rainfall. Source-receptor relationship analysis for sulfur showed that 70 to 91 precent of the total deposition came from the self-contribution by the Korean Peninsula. In winter, contribution from China was about 25 percent of the total deposition which was higher amount than any other season.