• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2211-2216
• /
• 2007

Liquefied gas vaporizer means machine to vaporize the liquefied gas as liquid nitrogen($LN_2$), liquefied natural gas(LNG), liquid oxygen($LO_2$) etc. In the air type vaporizer, the frozen dew is also created by temperature drop (below 273 K) on vaporizer surface. This problem increases as the time progresses and humidity increases. In addition, the frozen dew gradually becomes frost deposit consequently, heat transfer through vaporizer decreases because frost deposit form adiabatic sheet. Because of this reason, recent vaporizer system is installed as parallel type, this vaporizer system needs more expensive installation costs and more space. This paper was investigated on the heat transfer characteristics of liquefied gas vaporizer with super low temperature and this paper was carried out the numerical about air heating vaporizer with super low temperature. The numerical analysis on the heat transfer was studied on the effect of geometric parameters of the vaporizer, which are length 1000 mm of 4fin75le type vaporizer. 4fin75le means number of fin is 4 and height of fin is 75 mm.

• 한국분무공학회지
• /
• 제2권2호
• /
• pp.8-15
• /
• 1997

Combustion chamber systems using spray impinged on walls have been studied for improving combustion characteristics in high speed direct injection diesel engines. The fuel spray injected in a small combustion chamber may be easily impinged and deposited on the wall. The fuel deposit has been considered as the cause for unburned emission due to difficulty of fuel-air mixing. In this paper w-shaped combustion chamber which has four raised pips on the side wall is introduced and discussed by comparing with conventional chamber with no pips. The computer code employing new spray-wall interaction model in general non-orthogonal grids is used in here. The model is applied into the new chamber shape with raised pips. In this chamber system four-hole nozzle is used, and the sprays injected from the each hole impact on lands raised from the chamber wall surface. After impacting, the sprays break up into much smaller drops and distribute over all the chamber space, instead of distributing just near the wall surface in conventional omega-shape. The results showed the potential of the w-shaped chamber employing pips for dispersing droplets so as tn avoid the fuel deposit regions.

• 한국항공우주학회지
• /
• 제32권4호
• /
• pp.67-72
• /
• 2004

경험식을 이용한 1차원 해석에 의하여 30톤급 재생냉각 연소기의 냉각 유로 설계를 수행하였다. 1차원 해석에 의한 벽온도는 3차원 CFD 해석과 비교하여 약 100 K의 온도차이를 보였다. 동일한 냉각성능을 유지하면서 냉각 채널의 최대 폭이 4mm 와 2mm인 두 가지 설계안을 제시하였다. 냉각유체의 압력강하는 20% 증가할 것으로 예측되었다. 열차 폐 코팅과 탄소 침착물의 열저항을 고려한 경우, 최대 벽온도는 700K로 예측되었다. 본 연구에서 제시한 냉각 방법은 용량이 부족한 것으로 판단되는 바 막냉각이 추가적으로 적용되어야 할 것으로 판단된다.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.52-61
• /
• 1999

The laser induced forward transfer(LIFT) technique employs a pulsed laser to transfer parts of a thin metal film from an optically transparent target onto an arbitrary substrate in close proximity to the metal film on the target. In this work, a two-step method, the combination of LIFT process, in which a Au film deposited on the $Al_2$O$_3$ substrate by Nd:YAG laser and subsequent Au electroless metal plating on the by LIFT process generated Au seed, was presented. The influence of laser parameters, wavelength, laser power, film thickness and overlap ratio of pulse tracks, on the shapes of deposit and conductor line after electroless plating is experimentally studied. As a results, the threshold power densities for ablation, deposition and metallization were determined and comparison of threshold value between the wave length 1064nm and the second harmonic generated 532nm. In odor to determine a possible application in the electronic industry, a smallest conduct spot size, line width and isolated line space were generated.

• 천문학회보
• /
• 제43권1호
• /
• pp.72.1-72.1
• /
• 2018

Recently, an analysis of 3-micron spectra of CH4 line emission from our Gemini/GNIRS observations of Jupiter's polar regions yielded an unexpected result: The homopause (~1 microbar pressure level) located directly above the long-lasting 8-micron CH4 north-polar hot spot (Great 8-micron Hot Spot: GHS) is cool compared with the temperatures of nearby auroral regions (Kim et al. 2017). Most of the 8-micron emission of the GHS originates from CH4 at the ~1 mbar level (i.e., deeper in the stratosphere, where cooling time is several years), much longer than at the altitude of the homopause. We propose a mechanism to explain the temperature difference: locally-fixed and transient, but energetic auroral particles, which can penetrate to the 1 mbar level and deposit energy there creating and maintaining the GHS. For Saturn, thus far we have not detected distinctive 8-micron nor 3-micron CH4 hot spots in the polar regions. We will present a possible implication for this difference between Jupiter and Saturn.

• Journal of Forest and Environmental Science
• /
• 제6권1호
• /
• pp.8-17
• /
• 1989

Recent development of industry and urbanization in the interior of mountainous area increases the possibility of occurence of natural disaster, such as flood, landslide and deblis-flow. Erosion control facilities, which were the most significant activity to riverbed fixiation, were constructed at the downstream of the experimental basin. In the mountain torrents, the complex bed load transport has occurred by the drift of running water, and resulting in a formation of terrace deposits. Especially, channel migration caused by scouring and deposition frequently occurs at the wide areas of the river bed. Consequently, the unsymmetrical river bed charactristics indicate the degree of the channel migration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.477-480
• /
• 2005

The discharge of sewage sludge is rapidly increasing in Korea. But the most common sewage sludge disposal alternative is to incinerate and to deposit it in controlled landfills. However, space limitations on existing landfill sites, and increasing environmental concerns have prompted the investigation of alternative ash disposal routes. The utilization of sewage sludge ash would contribute to the elimination of an environmental problem and to the development of new high-performance materials. The purpose of this study is to apply to Alkali Activation into solidification of sewage sludge ash. It achieves leaching test, chemical composition and compressive strength test. As a result of tests, the sewage sludge ash has sufficient potential for use of pozzolanic raw material. However, it is judge to be available to construction material if research is continuously gone.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2001년도 춘계학술발표대회 논문집
• /
• pp.29-34
• /
• 2001

The purpose of this study is to provide a practical planning guide for the actual conditions and the preference by user characteristics in one-room housing. The data collected through questionnaire surveys from the residents of one-room housing in kangnam & sinchon. 259 samples we collected and are analyzed by using SPSS-PC. The results are follows : 1) Students: Students prefer monthly rent, down town, of officetel type, 8-l0py room size, and semi-furnished 2)Business men: They prefer multi function housing mixed office and residence, down town, officetel type, 11-l5py, and fully furnished housing. 3)Newly marriged couples: Ordinary habitation site, apt type, 16-l8py ,and 5: 5 division of space(bedroom:others) 4) Old age: normal habitation site, residence-commerce complex building type, middle corridor type, and 11-l5py. 5)Couple+child: lease of deposit basis, apt complex site, and 16-l8py.

• 한국지진공학회논문집
• /
• 제5권1호
• /
• pp.1-6
• /
• 2001

P파와 SV파와 입사할 때 비균질 퇴적층에서의 지진응답을 유한요소법과 경계여소법을 조합하여 해석하였다. 유한요소법을 사용하여 불규칙한 기하형상과 비균질 재료 특성을 모델링하였고, 경계요소법을 사용하여 인위적인 경계로부터 불필요한 파의 반사를 없앨수 있게 반무한 영역을 모델링하였다. 경계요소의 기본해는 반무한 영역문제에서 반드시 고려해야하는 방사조건을 자동적으로 만족시킨다. 따라서 외부영역과 내부영역의 접촉면에서 표면력의 평행조건과 변위의 연속조건을 사용하여 P파와 SV파에 의한 지진응답을 해석하였다.

• 한국지진공학회논문집
• /
• 제5권1호
• /
• pp.7-12
• /
• 2001

본 노문은 임의형상의 퇴적층을 갖는 반부한 영역내에서 SH하가 경사지게 입사할 때의 지진응답을 연구하였다. 그리고 비균질 퇴적층인 반무한 영역에서 파의 증폭을 다루었다. 사용한 수치해석 방법으로는 유한요소법과 경계요소법을 결합하여 수치해석하였다. 반무한 영역에서 자유장 응답과 정해를 비교 분석한 결과 잘 일치하여 검증되었다. 불규칙한 형상의 비균질 퇴적층을 갖는 부지에서의 지진응답 해석은 본 연구에서 개발한 수치해석 방법으로 가능하다. 따라서 임의 층상구조를 갖는 연약층에서의 SH파 증폭과 임의 각도와 입사하는 SH파에 대한 지진응답을 해석하였다.