• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.767-785
• /
• 2021

World-class magnesite deposits are developed in the Dashiqiao mineralized district of the Jiao-Liao-Ji Belt in China. This belt extends to the northern side of the Korean Peninsula and hosts major magnesite deposits in the Dancheon region of North Korea. Magnesite ores from the Pailou deposits in the Dashiqiao district is classified into pure magnetite, chlorite-magnetite, chlorite-talc-magnetite, and dolomite groups depending on the constituent minerals. According to the result of petrographic study, magnesite was formed by the alteration of dolomite, and, talc, chlorite, and apatite were produced as late-stage alteration minerals that replaced the magnesite. Fluid inclusions observed in magnesite are a liquid-type inclusion, with a homogenization temperature of 121-250 ℃ and a salinity of 1.7-22.4 wt% NaCl equiv. The chlorite geothermometer, indicating the temperature of hydrothermal alteration, is 137~293 ℃, slightly higher than the homogenization temperature of fluid inclusions, and the pressure is calculated to be less than 3.2 kb. For magnesite mineralization in the study area, the initially formed-dolomite was subjected to replacement by Mg-rich fluid to form a magnesite ore body, and then it was enriched through regional metamorphism and hydrothermal alteration. It seems that altered minerals such as talc were crystallized by Si and Al-rich late-stage hydrothermal fluids. These results are similar to the genetic environments of the Daeheung deposit, a representative magnesite deposit in North Korea, and it is believed that the two deposits went through a similar geological and ore genetic process of magnesite mineralization.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.20-28
• /
• 1991

근래에는 국내에서도 전자제어에 의한 Fuel Injection 방식을 채택한 엔진이 늘어가는 추세이며, 따라서 Intake Valve Deposit에 의한 문제가 발생한 소지가 점차 커지고 있으므로, 이에 대한 대비가 필요하게 되었다. 또한 국내 정유회사들도 이러한 추세에 따라 연료청정제(D.C. Additive)를 첨가한 연료를 시판중이거나 시판계획중에 있다. 따라서 국내연료청정제 및 국내 청정제함유 시판연료의 Intake Valve Deposit에 대한 청정효과를 Engine Dynamo 및 실차(Chassis Dynamo)시험을 통해서 평가해 보도록 한다.

• Journal of Surface Science and Engineering
• /
• v.31 no.6
• /
• pp.317-324
• /
• 1998

TiN and TiCN films were deposited on the high speed steel by Cathode Arc Ion Plating(CAIP) Process to investigate the tool life extension effect. The experiment variables were bias voltage and deposit time for the TiN coating and reactive gas flow rate ($CH_4:N_2$) under fixing deposit pressure, are current, bias voltage for the TiCN coating respectively. The micro structure and mechanical properties were investigated and compared for among the coating conditions using various methods and machining practice.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.591-598
• /
• 2000

In the present study, the variation of settlement, pore water pressure and undrained shear strength through model tests were measured. Also, the variation of water content, unit weight and shear strength by the vane shear tests were observed. In this study, appropriate deposit time of construction equipments used in treatment of hydraulic fills is determined from the prediction curve of increased shear strength in dredged fills.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.141-143
• /
• 2001

Ceramic fiber-reinforced composites have good mechanical properties in hardness and durability. In this study, we studied the formation of SiC/C composites from methyltrichlorosilane and hydrogen by the Pulse-chemical vapor infiltration(PCVI) to deposit silicon carbide around the changes of the amount of deposit. SiC/C composites formed at $950^{\circ}C$, 20torr, Pulse-times (5s/60s). SEM of the cross sectional area of semple showed deposited silicon carbide around fibers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.351-362
• /
• 2007

Predicted behaviour of a soft clay deposit in design stage is sometimes different from in-situ settlement and pore pressure measured during and after construction. In this paper, characteristics of settlement and pore pressure occurred in soft soil deposits were investigated briefly in order to get a better understanding of time-dependent viscoplastic behaviour and prevent geotechnical problems resulted from long-term settlement, differential settlement, etc.

• Journal of the korean society of oceanography
• /
• v.31 no.1
• /
• pp.32-36
• /
• 1996

The oyster shell bed (more than 47 cm thick) atop the Gaipri Point (granite coastal bluff) in the Hampyung Bay, southwest coast of Korea which is a coastal area of southeastern margin of the Yellow Sea basin has been interpreted as unique typhoon deposit formed at about 3610 yr BP or later. The unconformable boundary between the oyster shell bed by typhoon and the granitic soil horizon of the Gaipri Point is 820 cm high above the mean high-tide water level (MHWL). The $^{14}C$ age of the oyster shells is 3610${\pm}$70 yr BP.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.06a
• /
• pp.1-14
• /
• 1993

Ground reinforcements is the essential method to prevent the liquefaction of loose sand deposit, However, in the construction of the life lines, it is impossible to treat the whole loose deposit against liquefaction. As an countmeasure for the life lines against the liquefaction, a monitorning system can be considered for an immediate judgement of the liquefaction occurrence during an earthquake. Through shaking table tests on model grounds, pore presure developments were investigated in terms of the surface spectral velocity, which was verified as a tool for the immediate judgement of the liquefaction occurrence.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1999

Gas accident prevention supported capital offered by 3 Gas related rules doesn't meet the requirement of real situation when considering that deposit method and size. So the support haven't helped the gas accident prevention. The offer about the gas accident prevention supported capital is treated in this paper, The most powerful and effective method is considered in case of system prevention from gas accidents throughout the way of deposit method, size and operation method of gas accident prevention supported capital for gas accident prevention.

• Journal of Surface Science and Engineering
• /
• v.24 no.2
• /
• pp.88-95
• /
• 1991

The tin-lead alloy was electrodeposited in the low range of peak current density in order to investigate the change of composition and microstructure of them. The Pb content of alloy deposits, which was decreased with increasing average current density, was relatively lower than that of D.C. plated alloy deposit. The preferred orientation of alloy deposit was changed with increasing peak current density and the surface morphology of alloy deposits was closely related to the preferred orientation of them.