• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.390-397
• /
• 2006

The purpose of this study was to evaluate the accuracy and the consistency of four different electronic apex locators in an in vitro model. Fourty extracted premolars were used for the study. Four electronic apex locators (EAL) were Root ZX, Smarpex, Elements Diagnostic Unit (EDU), and E-Magic Finder Deluxe (EMF). After access preparation, the teeth were embedded in an alginate model and the length measurements were carried out at '0.5' and 'Apex' mark using four EALs. The file was cemented at the location of the manufacturers' instruction (Root ZX, EDU, EMF: 0.5 mark, SmarPex: Apex mark). The apical 4mm of the apex was exposed and the distance from the file tip to the major foramen was measured by Image ProPlus (${\times}100$). The distance from the file tip to the major foramen was calculated at 0.5 and Apex mark and the consistency of 0.5 and Apex mark was compared by SD and Quartile of Box plots. In this study, Root ZX and EMF located the apical constriction accurately within ${\pm}0.5 mm$ in 100%, whereas SmarPex and EDU located in 90% and in 70% respectively. For Root ZX and EMF, there was no significant difference between the consistency of 0.5 and Apex mark. However, for the EDU and SmarPex, Apex mark was more consistent than 0.5 mark. From the evaluation of the consistency in this study, for Root ZX and EMF, both 0.5 and Apex mark can be used as a standard mark. And for EDU and SmarPex, the Apex mark can be recommended to be used as a standard mark.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.158-175
• /
• 2005

Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.16-26
• /
• 2010

Objective: The purposes of this study were to evaluate the force and stress depending on the type, deflection and thickness of the materials and to evaluate the mechanical properties of thermoplastic materials after repeated loading. Methods: Four types of thermoplastic products were tested. Force until the deflections of 2.0 mm and the stress when the materials were restoring to its resting position were evaluated. The mechanical properties of thermoplastic materials evaluated after 5 repeated loading cycles. Results: The interaction was observed between the thickness and the deflection (p < 0.05) from the regression equation. Thickness and amount of deflection rather than products and materials showed the largest effect on force and stress. In all products, at least 159 gf of force was required for more than 1.0 mm deflection or when materials with 1.0 mm thickness were deflected. The stress recorded was more than 19 gf/$mm^2$. During repeated loading, each group showed significant difference on the force and the stress (p < 0.01), 10 - 17% reduction of force and 4 - 7% reduction of stress in average. Conclusions: Proper thickness of thermoplastic materials and deflection level of tooth movement should be decided for the physiologic tooth movement. Force decay after repeated loading should be considered for the efficient tooth movement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.269-281
• /
• 2008

Fatigue or overload can result in mechanical problems of implant components. The mechanical strength in the implant system is dependent on several factors, such as screw and fixture diameters, material, and design of the fixture-abutment connection and abutment. In these factors, the last rules the strength and stability of the fixture-abutment assembly. There have been some previous reports on the mechanical strength of the fixture-abutment assembly with the compressive bending test or short-term cyclic loading test. However, it is restrictive to predict the long-term stability of the implant system with them. The purpose of this study was to evaluate the influence of the design of the fixture-abutment connection and abutment on the mechanical strength and failure mode by conducting the endurance limit test as well as the compressive bending strength test. Tests were performed according to a specified test(ISO/FDIS 14801) in 4 fixture-abutment assemblies of the Osstem implant system: an external butt joint with Cemented abutment (group BJT), an external butt joint with Safe abutment (group BJS), an internal conical joint with Solid abutment (group CJO), and an internal conical joint with ComOcta abutment (group CJT). The following conclusions were drawn within the limitation of this study. Compressive bending strengths were decreased in order of group BJS(1392.0N), group CJO(1261.8N), group BJT(1153.2N), and group CJT(1110.2N). There were no significant differences in compressive bending strengths between group BJT and group CJT(P>.05). Endurance limits were decreased in order of group CJO(600N), group CJT(453N), group BJS(360N), and group BJT(300N). 3. Compressive bending strengths were influenced by the connection and abutment design of the implant system, however endurance limits were affected more considerably by the connection design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.19-46
• /
• 2016

The purpose of this study is to analyze the curriculum implementation of the Nursing-Specialized Vocational High School by researching on operation, organization and environment of the program of Nursing. This study aims to improve the curriculum of the Nursing-Specialized Vocational High School. This study has analyzed previous existing studies, Link of School info, Educational Statistics and data indicating establishment, operation and curriculum of the department of Nursing which have been collected from web sites of institutions and associations relevant to Nurse Education. The major results of this study are as follows: 1) As of the first semester of the year 2016, out of a total of thirty eight Specialized Vocational High Schools and Meister High Schools in the country, 6.4% of the schools have nursing educational programs. These schools have established the programs under various names, such as Health Nursing, Dental Health Nursing, Nursing, Nursing and Medical Tourism, Accounting in Nursing and Nursing Management, etc. Since 2012, enrollment rates have increased while post-graduation employment rates have decreased, with the average employment rate of Specialized Vocational High School graduates having reached up to 46% by 2015. 2) The Nursing-Specialized Vocational High School aims to create skilled Nurses Assistant such as Nurse Aide and Care giver. The program is successful in providing necessary courses to acquire required certification and proficient field experience but requires revisional changes in order to create a long-term program of sufficient qualification. The official requirement of 780 hours of field practice was completed during the three educational breaks from the first year of high school to the second year, while the curriculum was conducted separately in the field hospitals. 3) An average of two laboratory classrooms were available based on the facility requirement standard of Cities and Provinces Educational Policies. In order to secure proficient instructors of Nursing education, establishment of specific indicated subjects, regional placement, in-service education, research and supervision are essential for establishing excellence and continual improvement.

• Journal of Acupuncture Research
• /
• v.17 no.1
• /
• pp.55-66
• /
• 2000

The following results have been obtaind after examing 72patients with facial paralysis who were hospitalzed and treated through the time period of December 1st, 1996 to November 30th, 1999 at the Department of Acupuncture and Moxibustion of Seoul Oriental Medicine, Kyungwon University. During the examination, those 72 patients were divided into two groups, and One group was treated by oriental-western treatment, the other group was treated by oriental treatment. Oriental treatments were acupuncture and moxibustion, herb medicine, physical treatment and hygienic treatment. The one of main western treatments is steroid therapy. The results were obtained as follows : 1. In regard to signs at the first medical examination, lacrimation was showed highest number and facial paralysis, dysgeusia, hyperacusis were showed in numerical order. 2. In regard to prescription of oriental herb medicine, Kamissangbotang(加味雙補湯) was prescribed in greatest numbers and Boyangwhanotang(補陽還五湯), Kamiboiktang(加味補益湯), Ligigepungtang(理氣祛風湯) were prescribed in numerical order. 3. In regard to treatment number, 10~19 times for treatment was showed highest number and 1~9 times, 20~29 times, 40~49 times were showed in numerical order . 4. In regard to mean treatment times about injury region and main sign, the effect of oriental-western treatment was showed as follows: lacrimal gland disorder, hyperacusis, dysgeusia, facial paralysis were treated for 15.1, 27, 13.2 and 21.4 times, repectively. The effect of oriental treatment was showed as follows: lacrimal gland disorder, hyperacusis, dysgeusia, facial paralysis were treated for 34.8, 22.1, 33.8 and 16.3 times, respectively. 5. In regard ta the effect of treatment about injury region and main sign, oriental-western treatment was showed as follows: cases of lacrimal gland disorder were showed 1 of excellent case, 1 of fair case, 5 of good cases. In hyperacusis patients, there was showed 1 of fair case. In dysgeusia patients, there was showed 1 of excellent case, 3 of fair cases, 1 of good case. In facial paralysis, there were showed 5 of fair cases. Oriental treatment was showed as follows: In lacrimal gland disorder, the excellent were 4 cases, the fair were 10 cases, the good were 3 cases and the poor were 4 cases, In hyperacusis, the fair were 5 cases, the poor 2 cases. In dysgeusia, the excellent were 4 cases, the fair were 1 case, the good were 1 case and the poor was 1 case, In facial paralysis, the excellent were 9 cases, the fair were 4 cases, the good 3 cases and the poor were 3 cases. 6. The effect of total treatment was as follows: 30 cases were showed fair effect, 19 cases were showed excellent effect, 13 cases were showed good effect and 10 cases were showed poor effect. 7. In regard to attack factor, overlabour was showed highest number and wind-cold, mental stress, trauma, ear disease, common cold, dental diseae, reason unknwon were showed in numerical order. 8. In regard to premonitory symptoms, non significant symptoms were in 38 cases, the pain of peri-stylomastoid region were in 38 cases and headache, dysaesthesia of periorbit, dysgeusia, stomatitis, eyelid tic were showed in numerical order. 9. In regard to sex, male were 33 cases and female were 39 cases. The distribution of age was disclosed that thirty, forty, fifty, seventy, sixty, twenty and below twenty years were revealed in turn. Sex and paralytic side were showed as follows: male-left were 15 cases, male-right were 18 cases, female-left were 19 cases and female-right were 19 cases. In regard to attack frequence in month, March was showed highest number and January, April, May, August, October, etc were showed in numerical order. In regard to attack frequence in season, spring was showed highest number and winter, summer, fall were showed in numerical order, but attack frequence between four seasons wasn't showed significant difference.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.420-430
• /
• 2008

Statement of problem & Purpose: Articulators are very important for education and overall clinical situation in the field of prosthodontics, however preexisting articulators are designed and built based on maxillofacial structures and mean values of mandibular movement of Western people. Purpose of this research is to find out a adequate basis for applicating these articulators, presently used for clinical education, for Korean. Material and methods: 59 Korean adults (41 males, 18 females), aged between 24 to 41, where selected for this study. Two pairs of both maxillary and mandibular models were made for each examinee. These models where attached to both KaVo PROTARevo 7 and Hanau Modular semiadjustable articulators by using facebow transfer, than sagittal condylar inclination, occlusal plane inclination and position of mandibular on the articulator where measured. Result and conclusion: 1. Mean sagittal condylar inclination for KaVo PROTAR semiadjustable articulator was $33.75^{\circ}$(standard deviation $12.46^{\circ}$) meanwhile Hanau Modular semiadjustable articulator showed $40.72^{\circ}$(standard deviation $12.09^{\circ}$) for mean sagittal condylar inclination. 2. Mean occlusal plane inclination for KaVo PROTAR semiadjustable articulator was $-2.76{\circ}$(standard deviation $3.63^{\circ}$) meanwhile Hanau Modular semiadjustable articulator showed $11.87^{\circ}$ (standard deviation $3.63^{\circ}$) for mean occlusal plane inclination. 3. On the average center of the mandibular dentition were in the range of 5 to 7 mm of the central position of the articulator. Both anterior and posterior dentition were positioned at the center of the articulator vernacularly for KaVo PROTAR semiadjustable articulators, meantime for Hanau Modular semiadjustable articulator, anterior dentition was positioned 5 mm downwards and 3mm upwards for posterior dentition from vertically central position of the articulator.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.284-294
• /
• 2006

Objective: Activating mutations in the fibroblast growth factor receptor-2 (FGFR2) have been shown to cause syndromic craniosynostosis such as Apert and Crouzon syndromes. The purpose of this pilot study was to investigate the resultant phenotypes induced by the two distinctive bone-targeted gene constructs of FGFR2, Pro253Arg and Cys278Phe, corresponding to human Apert and Crouzon syndromes respectively. Methods: Wild type and a transgenic mouse model with normal FGFR2 were used as controls to examine the validity of the microinjection. Micro-CT and morphometric analysis on the skull revealed the following results. Results: Both Apert and Crouzon mutants of FGFR2 induced fusion of calvarial sutures and anteroposteriorly constricted facial dimension, with anterior crossbite present only in Apert mice. Apert mice differed from Crouzon mice and transgenic mice with normal FGFR2 in the anterior cranial base flexure and calvarial flexure angle which implies a possible difference in the pathogenesis of the two mutations. In contrast, the transgenic mice with normal FGFR2 displayed normal craniofacial phenotype. Conclusion: Apert and Crouzon mutations appear to lead to genotype-specific phenotypes, possibly causing the distinctive sites and sequence of synostosis in the calvaria and cranial base. The exact function of the altered FGFR2 at each suture needs further investigation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.245-252
• /
• 2009

The congenital missing of teeth is common, which takes place since the proliferation and differentiation are not allowed in that tooth bud fail to start development. The purpose of this study is to research incidence rate, number, and missing part of congenital missing teeth, and to study whether a person who has missing teeth has other abnormality of teeth or not. For this study, 1,520 subjects(aged 2.9$\sim$17) who had visited pediatric dentist department of Chonbuk national university dental hospital within 2 years were examined with an panoramic radiograph; exempting third molar missing state. The obtained results are as follows. 1. 8.88% among total subjects show missing teeth; male 9.05%, female 8.64% 2. The most frequently missing permanent teeth were the mandibular second premolars(22.3%). The most frequently missing primary teeth are mandibular lateral incisors(50%). 3. 43.3% patients have one permanent missing tooth, 34.3% have two, and 10.4% have more than six, respectively. In primary teeth, 86.7% patients have one missing tooth, and 13.3% have two missing teeth. 4. 18 patients(13.3%) have missing teeth as well as hyperdontia, while some patients have microdont, ectopic eruption, and fusion teeth.