• Journal of Technologic Dentistry
• /
• v.9 no.1
• /
• pp.5-19
• /
• 1987

The factors which impact on the productivity of medical organization are technique, manager, raw materials, management style, manpower structure, job construction, and so on. Human resources is the most important factor among them, but the productivity of serice organization can not be measured easily. The purpose of this study was to verify the effect of laboratory status, the degree of job cognition, and stress on the productivity of dantal prosthetic products, and to fine out the factors which impact on the productivity. The results were as follows: 1. The job characteristice of crown bridge laboratory part and porcelain laboratory part similar to each other. Also partial denture laboratory part and complete denture laboratory part were similar to each other. But that of orthodontic laboratory part was different from other. 2. the degree of job cognition made significant difference statisfically according to job characteristics of each dental laboratorise. 3. The correlation coefficient between job cognition of dental laboratory technician and workshop environment was.23, but the correlation between job cognition job stress appeared reversely, its coefficient was-.17. 4. The productivity of technician engaged in dental laboratory was much heigher than that of technician engaged in dental clinical laboratory room, and each were different in the degree of job cognition. 5. the most important factors which impact one the performance productivity of dental laboratory technician were the fact whether he married or not and his status.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.397-405
• /
• 2019

Purpose: This study examined the prevalence and risk factors of peri-implant disease after at least 7 years of dental implant loading. Methods: A total of 111 patients with 218 dental implants were treated. The follow-up period for all implants was at least 7 years. The patients' dental records were collected and risk factors of peri-implant disease were investigated through logistic regression analysis. Results: The overall implant survival rate was 95.87%, because 9 of the 218 implants failed. The prevalence of peri-implant mucositis and peri-implantitis was 39.7% and 16.7%, respectively. As risk factors, smoking and prosthetic splinting showed significant associations with peri-implantitis (P<0.05). Conclusions: Within the limits of this study, no significant correlations were found between any risk factors and peri-implant mucositis, but a significantly elevated risk of peri-implantitis was observed in patients who smoked or had splinted prostheses in 2 or more implants.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.93-100
• /
• 2007

In this study, an investigation was made on bristles for the prosthetic and periodontally involved patients based on the previous studies. The purpose of this study was to investigate the ideal location and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis. 3D scanner was used to develop 3D visual models of bristles and teeth. These models were developed to be used for designing the ideal bristles for the prosthetic and periodontally involved patients. For the ideal design of bristle, interproximal area of dental arch and bristle must get into maximum and standard teeth may have to be chosen from many gypsum molds. During the design process the factors should be considered that influence the removal of plaque by bristle.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.506-515
• /
• 2015

Objectives: This study was conducted to evaluate the status of hazard communication regarding dental materials among dental hygienists in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Materials: A total of 310 dental hygienists were surveyed using self-administered questionnaires to investigate the status of hazard communication on dental materials and information needs. We collected instructions for use and material safety data sheets(MSDSs) for 67 dental materials frequently used at dental hospitals located in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Results: The questionnaire surveys showed that only 11% of the 310 dental hygienists had knowledge of MSDS and 46.8% of respondents never read instructions for use before using materials. Just 7.4% of dental hygienists have undergone training on hazard information for dental materials. In particular, dental hygienists working at dental clinics had significantly lower response rates on knowledge of MSDS(p<0.001), reading of instructions for use(p=0.042) and training on the hazard information of dental materials(p=0.004) than those in dental hospitals or general hospitals. The essential information most desired by dental hygienists was hazard identification(82.3%) followed by first-aid measures(53.9%), handling and storage(51%), disposal considerations (49%) and toxicological information(47.1%). All dental materials were on foreign products which came from Japan(59.7%), the USA(26.9%) and Liechtenstein(13.7%). In terms of usage, 56.7% of dental materials were prosthetic, followed by conservation(31.3%), orthodontics(9%), and prevention(3%). We found that dental hygienists had accessed MSDSs for only five dental products among the 67 dental materials. The instructions for the use of the 67 dental materials provided hazard identification(64.2%), first-aid measures(83.6%), handling and storage(97%), disposal considerations(20.9%) and toxicological information(26.9%). Conclusions: Based on the results of this study, the hazard communication system for dental hygienists working at dental clinics should be improved.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.474-482
• /
• 2014

PURPOSE. To assess removable prosthetic restoration tolerance according to the patient section of the short form of the Gagging Problem Assessment Questionnaire (GPA-pa SF) and the influence of gender, education level and prosthesis type and denture-related mucosal irritation on the GPA-pa SF scores before treatment and over a period of two months after prosthesis insertion. MATERIALS AND METHODS. 130 participants who required removable prosthesis were surveyed with a standard form that included questions regarding age, gender, education level, dental attendance, and prosthetic restoration type. Participants answered the GPA-pa SF before restoration (T0) and 1 day (T1), 2 days (T2), 15 days (T3), 1 month (T4), and 2 months (T5) after prosthesis insertion. RESULTS. Of the 130 participants, 110 participants completed the prosthetic restoration procedure, but only 93 of these were able to use the prosthesis over the two-month period. The mean GPA-pa SF score obtained at T0 was higher than the scores obtained at the other periods in the total of the sample. Significant difference was present between mean scores obtained at T0-T1 and T2-T3 than scores obtained at other periods (P<.05). Female participants and participants with denture-related mucosal irritation had higher GPA-pa SF scores at all time points analysed. Significant difference was present between mean GPA-pa SF scores obtained at T2-T3 than scores obtained at other periods for females and participants with denture-related mucosal irritation (P<.05). Education level and prosthesis type did not significantly influence the GPA-pa SF score at any time point analysed (P>.05). CONCLUSION. GPA-pa SF scores were higher before the restoration procedure began, and decreased over time with the use of prosthesis. Gender and denture-related mucosal irritation affected the GPA-pa SF scores.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.273-282
• /
• 2015

Centric occlusion-maximum intercuspation (CO-MI) discrepancy is one of main causes of evoking premature contact and resultant mandibular shift. These non-physiological conditions can induce temporomandibular disease, periodontitis, and non-carious cervical lesion. Therefore, if CO-MI discrepancy exists in patients who need extensive prosthetic rehabilitation, it must be corrected and then physiological occlusion must be restored. This report describes the treatment procedure of removing CO-MI discrepancy and prosthetic rehabilitation in a patient with 3.5 mm discrepancy, multiple caries and periodontitis. Proper mandibular position and modified opening & closing movement were confirmed by ARCUSdigma II and transcranial radiograph.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.6
• /
• pp.343-350
• /
• 2021

PURPOSE. The success of an implant-prosthetic rehabilitation is influenced by good implant health and an excellent implant-prosthetic coupling. The stability of implant-prosthetic connection is influenced by the rotational tolerance between anti-rotational features on the implant and those on the prosthetic component. The aim of this study is to investigate the rotational tolerance of a conical connection implant system and its titanium abutment counterpart, in various conditions. MATERIAL AND METHODS. 10 preparable titanium abutments, having zero-degree angulation (MegaGen, Daegu, Korea) with an internal 5-degree conical connection, and 10 implants (MegaGen, Daegu, Korea) were used. Rotational tolerance between the connection of implant and titanium abutments was measured through the use of a tridimensional optics measuring system (Quick Scope QS250Z, Mitutoyo, Kawasaki, Japan) in the as-received condition (Time 0), after securing with a titanium screw tightening at 35 Ncm (Time 1), after tightening 4 times at 35 Ncm (Time 2), after tightening one more time at 45 Ncm (Time 3), and after tightening another 4 times at 45 Ncm (Time 4). RESULTS. The group "Time 0" had the lowest values of rotational freedom (0.22 ± 0.76 degrees), followed by the group Time 1 (0.46 ± 0.83 degrees), the group Time 2 (1.01 ± 0.20 degrees), the group Time 3 (1.30 ± 0.85 degrees), and the group Time 4 (1.49 ± 0.17 degrees). CONCLUSION. The rotational tolerance of a conical connection is low in the "as received" condition but increases with repetitive tightening and with application of a torque greater than 35 Ncm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.26-32
• /
• 2023

Dental trauma is common in active children and adolescents. Among them, in the case of ankylosis due to avulsion, diagnosis through clinical examination is important, and the treatment is important for esthetic prosthetic restoration after adulthood. This case is a case of esthetic prosthetic restoration of maxillary anterior teeth through decoronation and implant. After that, space was maintained for prosthetic restoration using a decoronated crown. After becoming an adult, precise implant placement and esthetic prosthetic restoration were possible using guide surgery. For soft tissue support, the temporary crown were replaced by changing the contours of the temporary crown, and the final esthetic prosthesis was fabricated by digital wax-up.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.791-799
• /
• 2011

Objectives : This study aimed at examining the aspects of utilization of the dental services in some regions and analyzing the related factors with a view to helping the old solve the dental problems and overcome the difficulties. Methods : This investigation was intended for 422 old people living in Jeon-ju city and Jang-su county from July 18, 2006 to August 25 by direct interviewing posing questions. The survey data sets were analyzed by chi-square, correlation, multiple regression and logistic regression. Results : 1. The average number of the existing teeth per an old person was 13.6 and the 28.8% of the old who didn't use denture called for dentures. 2. The annual coefficient of utilization in dental services for an old person was 52.3% and the annual average visits to dental clinics were 3.12 days while 38.6% of the old experienced illegal dental treatments. 3. The affecting factors on the dental utilization for treatment were as follows: family income, dental clinics available, the number of existing teeth, the days of dental trouble, the recognition of the prevention of the dental disease, the knowledge for the dental treatment and the oral health judged by himself. 4. The major variables influencing the utilization of dental services were spouse presence, form of family, income, having a regular dental care, denture presence and the experience of inconvenience in living. Conclusions : To conclude, the following suggestions could be made. First, It was necessary that enforcement practice of free dental prosthesis service and application to the national health insurance in old people's prosthetic therapy for government support because the economic factor was barrier to utilization of the dental services. Second, Dental clinic was required to the health center because availability of common dental services was big impact in utilization of the dental services.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the efficacy of two different metal conditioners for non-precious metal alloys for the bonding of porcelain to a cobalt-chromium (Co-Cr) alloy. MATERIALS AND METHODS. Disk-shaped specimens ($2.5{\times}10.0mm$) were cast with Co-Cr alloy and used as adherend materials. The bonding surfaces were polished with a 600-grid silicon carbide paper and airborne-particle abraded using $110{\mu}m$ alumina particles. Bonding specimens were fabricated by applying and firing either of the metal conditioners on the airborne-particle abraded surface, followed by firing porcelain into 5 mm in diameter and 3 mm in height. Specimens without metal conditioner were also fabricated. Shear bond strength for each group (n=8) were measured and compared (${\alpha}=.05$). Sectional view of bonding interface was observed by SEM. EDS analysis was performed to determine the chemical elements of metal conditioners and to determine the failure modes after shear test. RESULTS. There were significant differences among three groups, and two metal conditioner-applied groups showed significantly higher values compared to the non-metal conditioner group. The SEM observation of the sectional view at bonding interface revealed loose contact at porcelain-alloy surface for non-metal conditioner group, however, close contact at both alloy-metal conditioner and metal conditioner-porcelain interfaces for both metal conditioner-applied groups. All the specimens showed mixed failures. EDS analysis showed that one metal conditioner was Si-based material, and another was Ti-based material. Si-based metal conditioner showed higher bond strengths compared to the Ti-based metal conditioner, but exhibited more porous failure surface failure. CONCLUSION. Based on the results of this study, it can be stated that the application of metal conditioner is recommended for the bonding of porcelain to cobalt-chromium alloys.