• Korea-Australia Rheology Journal
• /
• v.20 no.4
• /
• pp.221-226
• /
• 2008

The purpose of this study was to compare rheological properties of six dental interocclusal recording materials and to investigate the effect of temperature on the rheological properties during setting. Five polyvinylsiloxane materials and one polyether material were investigated in this study. The storage modulus (G') and the loss factor ($tan{\delta}$) were measured from 30s after mixing during setting, using the universal dynamic spectrometer. Viscoelastic properties were evaluated by means of G' and $tan{\delta}$ from 5 repeats at $21^{\circ}C$ and $33^{\circ}C$. Individual changes during setting were also evaluated. All data were statistically analyzed using one-way ANOVA and multiple comparison $Scheff{\acute{e}}$ test at the significance level of 0.05. The mean of G was checked at $t_{set}$ (the setting time provided from manufacturer) and $t_{300}$ (the end of experimental time) and the mean of $tan{\delta}$ was checked at to and $t_{set}$. Whereas the increase of the G' value showed generally exponential changes at $21^{\circ}C$, the change of the G' value at $33^{\circ}C$ displayed sigmoidal curves during setting. The change of loss factor $tan{\delta}$ during setting varied. Within the limitations of this study, dental interocclusal recording materials had different viscoelastic properties and most of the materials showed different fluidity at $21^{\circ}C$ and $33^{\circ}C$.

• Journal of Oral Medicine and Pain
• /
• v.23 no.2
• /
• pp.193-209
• /
• 1998

In identifying bodies that are severely decayed or damaged, methods using fingerprints and various biochemical tests are known to have its limits. To overcome this, forensic odontological method which is based on the analysis of the cranium, tooth and dental restoration is used to enhance the accuracey of individual identification. For this reason, I have come to analysis of the dental materials that exists between the teeth that is perceived to have been previously restored and the one adjacent to it. By analyzing the constituents of gold crown-restored, non-precious metal-restored, gold inlay-restored and amalgam -restored teeth, and adjacent teeth using EDX(energy dispersive X-ray microanalysis) which was invented to analyze very small amount of elements, the nature of the restoration could be predicted and the results obtained were as follows. 1. Some of constitute of gold alloy was extracted from residual cement of gold crown restoration, but that was not extracted from the restored tooth and the one adjacent to it. 2. Some of constituents of non-precious metal alloy was extracted both in the residual cement on the tooth with no-precious metal restoration and in the tooth with the restoration itself. However, none of its constituents were found in the tooth adjacent to it. 3. Some of constituents of gold alloy were found in the residual cement of gold inlay, but they were not found in the restored tooth and the adjacent tooth. 4. Some of constituents of amalgam alloy were found both in tooth restored with amalgam and in the adjacent tooth. From the results obtained above, it is possible to utilize the data obtained from analyizing residual dental materials in a more effective way. This data compensates for the lost data due to any harm done to the restorations prior to individual identification and further enhances the accuracy. Therefore, it could be concluded that this process of analyzing residual dental materials could be beneficial to individual identification in the area of forensic odontoldogy.

• International Journal of Oral Biology
• /
• v.35 no.4
• /
• pp.191-195
• /
• 2010

Oleanolic acid is a natural triterpenoid that exists widely in foods and some medicinal herbs. The purpose of this study was to determine the antimicrobial activity of oleanolic acid against Streptococcus mutans strains isolated from a Korean population. Antimicrobial activity against these bacteria was evaluated by minimal inhibitory concentration (MIC) and time kill curves. The tolerance of human gingival fibroblasts and human periodontal ligaments to oleanolic acid was tested using a methyl thiazolyl tetrazolium (MTT) assay. The $MIC_{90}$ value of oleanolic acid for both S. mutans and S. sobrinus isolated from Koreans was 8 ${\mu}g/ml$. Oleanolic acid showed bactericidal effects against S. mutans ATCC $25175^T$ and S. sobrinus ATCC $33478^T$ at $1\;{\times}\;MIC$ ($8{\mu}g/ml$) and had no cytotoxic effects against KB cells at this dose. The results suggest that oleanolic acid could be useful in the future development of oral hygiene products for the prevention of dental caries.

• The Journal of the Korean dental association
• /
• v.54 no.10
• /
• pp.780-788
• /
• 2016

Dentin bonding systems are unique dental materials which are rapidly evolute and essential materials for bonding of restorative materials to dentin. Now, 4th generation, 5th generation, 6th generation and 7th generation of dentin bonding systems are used in clinic. We investigated the frequency, motivation of choosing dentin bonding systems and satisfaction of them by survey in 2014. 5th generation of dentin bonding systems are mostly used in Korea and young dentist have tendency to choose newly developed dentin bonding systems.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.12-15
• /
• 2010

Ti-13Nb-13Zr (TNZ) alloy has attracted considerable research attention in the last decade as a suitable substitute for the commercially used Ti-6Al-4V (TAV) alloy for orthopedic and dental implant applications. Hence, in the present work, a comparative evaluation has been performed on the electrochemical corrosion behavior of TNZ and TAV alloys in 0.9 wt.% NaCl solution. The result of the study showed that both the alloys had similar electrochemical behavior. The corrosion resistance of TAV alloy is found to be marginally superior to that of TNZ alloy.

• The Journal of the Korean dental association
• /
• v.13 no.4
• /
• pp.319-328
• /
• 1975

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.3
• /
• pp.98-104
• /
• 2015

Titanium barrier membranes are prepared to investigate the effect of surface-treatments, such as machining, electropolishing, anodizing, and electropolishing + TiN coating, on the biocompatibility and physical properties of the membranes. The surface roughness (Ra) of the membrane decreases from machining ($0.37{\pm}0.09{\mu}m$), TiN coating ($0.22{\pm}0.09{\mu}m$), electropolishing ($0.20{\pm}0.03{\mu}m$), to anodizing ($0.15{\pm}0.03{\mu}m$). The highest ductility (24.50 %) is observed for the electropolished Ti membrane. No evidence of causing cell lysis or toxicity is found for the membranes regardless of the surface-treatments. Cell adhesion results of L-929 and MG-63 show that the machined Ti membrane exhibits the highest cell adhesion while the electropolished membrane is the best membrane for the L-929 cell proliferation after 7 days. However, no appreciable difference in MG-63 cell proliferation among variously surface-treated membranes is detected, suggesting that the electropolished Ti membrane is likely to be the best membrane due to the synergic combination of tailored flexibility and excellent fibroblast proliferation.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.211-221
• /
• 2002

The purpose of this study was to analyze the commercial paste opaque products currently available in domestic of foreign as well as domestic, such as Duceram Plus(DU; Ducera Dental GmbH, Germany), VMK 95(VM; Vita Co., Germany), Noritake EX-3(EX; Noritake Co., Japan) and Ceramax(CE; Alphadent Co., Korea). They were characterized in thermal expansion coefficient, particle size distribution, viscosity and solvent using thermomechanical analyzer, particle size analyzer, rheometer and infrared spectrophotometer. Experimental results are as follows; Firstly, thermal expansion coefficients were determined $13.9{\times}10-6/^{\circ}C$ for DU, $14.3{\times}10-6/^{\circ}C$ for VM, $13.3{\times}10-6/^{\circ}C$ for EX, and $14.0{\times}10-6/^{\circ}C$ for CE. Secondly, percent of partice size below $1{\mu}m$ were 12% for DU, VM and CE, and 13% for EX, percent between $1{\mu}m$ and $5{\mu}m$ were 42% for DU, 42% for VM, 38% for EX, and 61 % for CE, percent between $5{\mu}m$ and $10{\mu}m$ were 21 % for DU, 24% for VM, 20% for EX, and 18% for CE, and over $10{\mu}m$ were 25% for DU, 22% for VM, 29% for EX, 9% for CE. Thirdly, the basic composition of the solvent in all of the commercial paste opaques were determined as ethylene glycol from FT-IR investigation. Lastly, measured viscosities were 1798 cp for DU, 536 cp for VM, 1110 cp for EX, and 721 cp for CE.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.3
• /
• pp.249-256
• /
• 2015

Restorative dental materials have advanced rapidly, with improved physical properties that improve survival rates. Accordingly, various materials can be selected. Amalgam, composite resin, glass-ionomer cement, and preformed stainless steel crowns have all been used widely for the restoration of dental caries in primary molars. The various dental materials used to treat proximal caries in the primary molars have distinct advantages and disadvantages. However, few studies have examined their survival rates. This retrospective study examined the 2-year survival rates of more than 700 class II restorations of proximal caries in primary molars clinically and radiologically according to the type of restoration. The study results should help in the selection of class II restorations for molars, one of the biggest concerns of pediatric dentists.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.606-619
• /
• 2009

Objectives : This study was to examine the state of customized visiting oral health programs in a bid to help facilitate the unified operation of the programs and the development of required guidelines. Methods : The subjects in this study were 49 dental hygienists who were professionals responsible for customized visiting health care programs across the nation. Results : 1. Regarding the form of employment of the dental hygienists were investigated many contract and daily workers. 2. As to the possession of equipment necessary for visiting oral health programs, denture cleaners(12.2%) were most widely possessed in some regions, followed by mobile scalers(10.2%) and mobile suctions(8.2%). In terms of expendable devices and materials, dental mirrors, pincettes and explorers were the most widely possessed dental checkup devices, and the most widely possessed oral hygiene supplies were toothbrushes, interdental brushes and denture cleaners. Those devices and materials were in more possession than the other types of devices and materials. The most widely possessed equipment for educational purpose was laptop computers, followed by beam projectors and screens. The most widely possessed teaching materials were dentiform, followed by CD-ROMs. 3. Those whom they visited the most for oral health care service were elderly people, followed by the disabled and patients with chronic diseases. The dental hygienists who went out to visit those people outnumbered the others who stayed at public health centers. Concerning the types of visiting oral health care service, the most prevalent service provided to the elderly included denture cleaning/management, oral massage and preventive treatment against dental caries. The most dominant service provided to the disabled involved education of the oral health care act, preventive treatment against dental caries and toothbrushing by professionals. The most common service offered to patients with chronic diseases was education of the oral health care act and oral health education. The dental hygienists paid a visit to a mean of 5.8 households a day. The average weekly number of households cared by the dental hygienists was 27.3. It took a mean of 37.1 minutes for them to take care of each household. 4. As for satisfaction level with the implementation of the visiting oral health programs, they expressed the greatest satisfaction at teamwork with professionals($3.56{\pm}0.94$), followed by the professionalism of their work($3.21{\pm}0.94$) and workload($3.08{\pm}0.94$). Their satisfaction level with the work conditions required for creative job performance($2.75{\pm}0.98$) and partnership with other institutions($2.64{\pm}1.03$) was below 3.0. In regard to the impact of their characteristics, marital status made a statistically significant difference to satisfaction level with workload. The unmarried dental hygienists were more pleased with their workload than the married ones(p<0.05). 5. As to needs for education for professionalism improvement, they asked for education about visiting oral health care skills the most, followed by education about oral health care for patients with chronic diseases, education of planning/evaluation and education of oral health care for the disabled. Conclusions : The top priority for the vitalization of the programs was the procurement of budget, followed by the procurement of equipment and educational media and the procurement of human resources.