• Journal of Technologic Dentistry
• /
• 제31권4호
• /
• pp.55-66
• /
• 2009

This research collected the curriculum for Dental Technology from a total of 20 schools --3-year colleges and 4-year colleges-- all in Korea. And we analyzed the average credits of subjects from students. As a result of this analysis, we get the conclusion below: 1. In the arithmetic mean of the major basis subjects which graduates and undergraduates answered about each subjects; Seminar, Dental morphology I II, Dental morphology practice I II, and Dental devices & instruments don't have many credits. And averages of the major application subjects credits which are Implants(especially low), Occlusal anatomy practice I II, Dental ceramics practice I II, and Dental ceramics practice are low, mostly have a converged tendency in high points. 2. In an analysis of the correlation which is based on the major basis subjects: Dental esthetic, oral anatomy I II, Dental materal practice III, Dental casting pracedure, Oral hygiene, Health & medical law, Management administration, and Medical terminology have a meaningful difference. (${\rho}$ < 0.05) 3. In an analysis of the correlation which is based on the major application subjects; Crown and bridge prosthodontics practice IV, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Dental ceramics I II, Dental ceramics practice I II, Dental ceramics practice IIII, Occlusal anatomy I II, Occlusal anatomy practice I, Operative dentistry laboratory technology I, Operative dentistry laboratory technology practice II, Dental attachment laboratory technology practice, Implants, and Dental laboratory clinical practice have meaningful difference. (${\rho}$ < 0.05) 4. In an analysis of the correlation which is based on the ratio of a theory to an actual training; 40:60(38.57%) is the highest, followed by 30:70(30.04%), 50:50(23.32%), 60:40(5.83%), and 70:30(2.24%). These have meaningful difference. (${\rho}$ < 0.05) 5. In an analysis of the correlation which is based on the distinction of sex: Partial denture prosthodontics practice I II III, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Occlusal anatomy practice I II, Implants, Medical terminology have meaningful difference. (${\rho}$ < 0.05) For the purpose of training entrepreneurs of middle standing who is required by a future society, Department of Dental Technology's Curriculum need to be managed with planning a curriculum which reflects opinions of graduates, undergraduates and a society, and also are considered not focusing on a supplier but focusing on a user.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제31권4호
• /
• pp.310-315
• /
• 2015

Purpose: The purpose of this study was to measure the tightening torque for dental implant in dental laboratory and to analyze of the effects of different tightening torque. Materials and Methods: The tightening torque for dental implant in dental laboratory were measured by digital torque gauge. The length of abutment and analog were measured as tightening torque of manufacturer's instructions and the measured value. And the data were statically analyzed. Results: The mean tightening torque of implant screw in dental laboratory was $1.563{\pm}0.332Ncm$. The external type implant system of total length were showing no significant differences but the internal type implant system had difference significant (P < 0.05) when compared with tightening torque. Conclusion: The implant prosthesis should be made under manufacturer's instructions especially as tightening torque of screw. For the fidelity of implant prosthesis, dental technician should learn how to use the torque gauge.

• Journal of Technologic Dentistry
• /
• 제25권1호
• /
• pp.9-20
• /
• 2003

Using a nickel-chrome casting alloy called 'Rexillium V' which is also available as base metal alloy for dental ceramic crown, 4 types of mixtures(A, B, C, D) with old and new metal were prepared for cyclic casting. The results of cyclic casting can be outlined as follows: 1. For Vickers hardness after casting, specimen A and D tended to have lower hardness in the course of cyclic casting, while specimen B and C tended to higher hardness. 2. The results of X-ray diffraction analysis showed that major crystal phase contained nickelchrome compounds and carbide. 3. The observation results of SEM photographs after cyclic casting show that there was a significant tendency to have similar structures among experimental groups. 4. The results of EDX analysis after cyclic casting showed that there were little differences in chemical composition between parent metal and base metal alloy. Although industrial nickel-chrome cast alloy did not show any significant change in material properties even through cyclic casting over several times, it is recommended that more there be more in-depth studies on how to detect any potential corrosion, discoloration and toxication of dental ceramic crown implanted in patient's oral cavity.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.161-166
• /
• 2013

PURPOSE. This study aimed to identify the effects of the sintering conditions of dental zirconia on the grain size and translucency. MATERIALS AND METHODS. Ten specimens of each of two commercial brands of zirconia (Lava and KaVo) were made and sintered under five different conditions. Microwave sintering (MS) and conventional sintering (CS) methods were used to fabricate zirconia specimens. The dwelling time was 20 minutes for MS and 20 minutes, 2, 10, and 40 hours for CS. The density and the grain size of the sintered zirconia blocks were measured. Total transmission measurements were taken using a spectrophotometer. Two-way analysis of variance model was used for the analysis and performed at a type-one error rate of 0.05. RESULTS. There was no significant difference in density between brands and sintering conditions. The mean grain size increased according to sintering conditions as follows: MS-20 min, CS-20 min, CS-2 hr, CS-10 hr, and CS-40 hr for both brands. The mean grain size ranged from 347-1,512 nm for Lava and 373-1,481 nm for KaVo. The mean light transmittance values of Lava and KaVo were 28.39-34.48% and 28.09-30.50%, respectively. CONCLUSION. Different sintering conditions resulted in differences in grain size and light transmittance. To obtain more translucent dental zirconia restorations, shorter sintering times should be considered.

• Journal of Technologic Dentistry
• /
• 제16권1호
• /
• pp.12-42
• /
• 1994

The study objected to the 36persons out of 55 persons who have registered under the association of the professor of department of Dental Laboratory Technology to grasp contents of May, 1992, and objected to the 74persons out of 100persons who have registered under the association of an a lumni of Department of dental Laboratory Technology, Jisan Junior college to grasp contents about improvement of dental laboratory technology, Jisan Junior College to grasp contents about improvement of the national practical examination in the dental technician of the present day of May, 1994 and its results which we have acquired by this study were as follows : There are lots of opinions who have required the necessities to enforce for a national practical examination in the dental technician. A sense of satisfaction forward the system of a national practical examination in the dental technician appeared as unsatisfaction and it's unsatisfaction decreased from evaluation me operation method, the makes of questions, selection of a markers, distribution of marks of a practical examination. The operation method of a practical examination have appeared the opinions which they wished the present system. A date of operation a practical examination have appeared the opinion of which they preferred late in February. The distribution of marks of a practical examination have appeared the opinions which they wished the present system. The problem of the makes of questions of carving test which derived by an out flow of cast appeared which 52.7 percent(58 persons), lack of objectivity and lack of a standard evaluation appeared which 40 percent(44 persons), and lastly appeared. 5.5 percent(6 persons) with partiality of a questions. The problem of the makes of question of Q-test which derived by lack of a standard evaluation appeared which 44.5 percent(49 persons), lack of objectivity appeared which 39.1 percent(43 persons).

• Journal of Technologic Dentistry
• /
• 제42권2호
• /
• pp.173-185
• /
• 2020

Purpose: The purpose of this study was to investigate dental technicians' awareness of infections and to enhance their interest and commitment towards infection prevention. Methods: A self-reported questionnaire survey was conducted among dental technicians. Total of 195 responses were used for analysis. A cross-tabulation analysis was used to compare dental technicians' awareness of infections according to their levels of education on infection prevention (α=0.05). Results: Dental technicians were educated on infection prevention (40.5%). Most participants received infection prevention education from school (29.8%). Dental laboratories had an infection control guideline (34.9%). Dental technicians were not aware of infection risks at their workplaces or believed that they were not at risk of infections at their workplaces (59.3%). Conclusion: Dental technicians must be consistently educated on infection prevention and control through systematic education at school and wider promotion through media. Research is needed to economically and efficiently improve equipment used by dental technicians and to protect them from infectious diseases. A budget for infection prevention must also be determined. Institutional measures such as providing support for dental technicians at the policy level and developing a basic infection prevention manual are necessary. Solving these issues not only protects dental technicians from infections but also allows them to provide high-quality medical services.

• Journal of Digital Convergence
• /
• 제14권4호
• /
• pp.363-370
• /
• 2016

Noise is unwanted sound that is the reason of the stress and hearing loss. The current study attempted to estimate whether the noise of dental laboratory affected stress and pure tone audiometry (PTA) of dental laboratory technicians (DLTs) using heart rate variability, air and bone conduction audiometry. The age, heights, and weights of DLTs were resembled control. Standard deviation of normal to normal interval such as stress resistance and normalized HF of DLTs were significantly decreased, but heart rates, normalized LF, and LF/HF ratio of DLTs were significantly increased compared with control. In air conduction audiometry of DLTs, significant increments of thresholds encountered in 125, 250, 500, 1000, 2000, 3000, 4000, and 6000 Hz in the right ears and 125, 250, 500, 1000, and 2000 Hz in the left ears. Thresholds of bone conduction audiometry in both ears were significantly increased in 250, 500, 1000, 2000, and 4000 Hz. The findings in this study provide that stress and hearing loss observed in noise-exposed DLTs at dental laboratory. Therefore, proper safety precautions should be carried out at dental laboratory.

• Journal of Technologic Dentistry
• /
• 제22권1호
• /
• pp.89-112
• /
• 2000

Although dental laboratory technicians are prone to be exposed to various work-related health hazardous materials such as dusts, chemicals, etc., the prevalence and nature of work-related health problems of them have not been a matter of great concern in the field of occupational health service in Korea. The purpose of the present investigation was to describe a collected profile of subjective health symptoms and their attributable factors in Korean dental laboratory technicians. A questionnaire listing five groups of health symptoms and five health symptom-related factors was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental laboratory technicians filled out the questionnaires and returnde them. Five groups of health symptoms included musculoskeletal symptom, dermal symptoms, respiratory symptoms, eys symptoms, and ear symptoms. Five health symptom-related factors were occupational environment-related health risk factors, work history, health related habits and status, use of personal protective equipment and general characteristics. Detailed parameters of health risk factors were work posture, vibration, and chemical or physical hazards such as dust, fume, vapor, solvent, light, and noise for occupational environment-related factors; work place, area, number of employees, work hours, career, work part, and work load for work history; Broca's index, hours of sleep, eating, smoking, alcohol, exercise, health examination, and self assessed health status for health habits and status; face masks, goggles, and so on for use of personal protective equipment, and; age, sex, marital status, and education for general characteristics. Before the start of main survey, a pilot survey was carried out for validity and reliability tests of the questionnaire. All the data obtained were coded and analyzed with PC/SAS 6.12 program. The prevalence of health symptoms was the highest in musculoskelton (87.3%), and followde by eyes (78.9%), respiratory organs (64.3%), ears (57.8%), and skin (52.2%) in descending order. Statistically significant risk factors by multiple logistic regression analyses were sex, health examination, self assessed health status, and hand/finger posture in musculoskeletal symptoms; sex, self assessed health status, career, acid gas, and hand contact with resin mixture in deraml symptoms; Broka's smoking, exercise, self assessed health status, and face mask in respiratory symptoms; sex, hours of sleep, self assessed health status, work hours, work load, plaster dust, inadequate lighting, and goggle in eys symptoms, and eating, smoking, self assessed health status, and work load in ear symptoms. With the above considerations in mind, prevalence of subjective symptoms among Korean dental laboratory technicians was relatively high, and they were attributable to most of the occupational environment-related factors, work history, use of personal protective equipment, health habits and status, and general characteristics. Particularly, it is suggested that health promotion programs for promoting self- assessed health status and smoking cessation, preventive measures for protection of the female technicians’health, and reducing work load be necessary, since those factors were associated with more than one subjective symptom.

• Journal of Korean Dental Hygiene Science
• /
• 제5권2호
• /
• pp.85-96
• /
• 2022

Background: This study was aimed at determining the relationship of the Dominance, Influence, Steadiness, and Conscientiousness (DISC) personality type with the major satisfactions and job preferences of dental hygiene and technician students. Methods: We enrolled 264 dental hygiene and technician students from a junior college in Chungcheong-do. A questionnaire survey was conducted to determine the DISC behavior type, major satisfaction level, and job preference of the participants. Statistical analyses were performed with the independent-samples t-test, one-way analysis of variance, and multiple regression. Results: Dental technician students had higher major satisfaction (p< .001) and preferred jobs with potential for growth (p= .020) or matching their vocation and interests (p= .013) compared to dental hygiene students. Factors influencing major satisfaction were grade (β= .160, p= .008) and a social personality type (β= .146, p= .070). Factors influencing preference for jobs with high growth potential were the personality type (β= .236, p= .001), grades (β= .157, p= .002), and major satisfaction (β= .429, p< .001). The conscientiousness personality type was conducive to preferencefor jobs with high growth potential. The steadiness personality type was conducive to preference for jobs aligned with vocation and interest (β= .249, p= .004). The conscientiousness personality type (β= .137, p= .041) and high major satisfaction (β= .193, p= .003) were conducive to preference for jobs with a satisfactory working environment. Conclusion: The results of this study could serve as a basis for customized career counseling and education programs according to personality types.

• Journal of Technologic Dentistry
• /
• 제26권1호
• /
• pp.59-67
• /
• 2004

The purpose of this study was to research the recognition of Korean Dental Technicians in Busan region about retitle of the name of 'Dental Technician'(DT), then to figure out the reality of retitle of the name(DT), so to provide data for whole country survey and to drive of the retitle of DT by Korea Dental Technicians Association. For these purpose, 250 subjects were sampled out of dental technicians in Busan, and the survey was performed with self-administered questionnaire. Out of all collected questionnaires, 192 pieces(76.8%) were addressed for this study. 1) Their desires on changing of the name(DT), 57.4%(74/129) was agreed. 2) If they could change the name(DT), they hope 3 main new names and the others, Dental Lab Art Technician(39.2%), Certified Dental Technician(23.0%), Dental Prosthetic Technician(23.0%), the others(14.8%).