• 대한치과의사협회지
• /
• 제13권9호
• /
• pp.823-828
• /
• 1975

We have effectually treated 22 years girl who had complained of an aterior open-bite. Treatment was based on non-extracted and multibanded technigue at the use of horizontal loop with 0.016 inch green Elgiloy wire. Anteior cross elastics, C1Ⅲ intermaxillary elastics, occasicnally C1.Ⅱ elastics were used. when vertical discrepancy was corrected, we changed the arch wire making use of 0.018 ×0.022 inch rectangular wire with 1st. and 2nd. order bend. After 12mons. the ideal arch wire with tie back loop was placed for stabilizing arch. Nearly after 20 months bands were removed and placed retainer.

• 대한치과교정학회지
• /
• 제17권2호
• /
• pp.289-297
• /
• 1987

For the comparisons of dental archs and crowdings between musical wind instrument players groups and non-wind instrument players groups, 64 male wind instrument players and 31 non-wind instrument players group were selected. The results of the measurements were as follow. 1 Upper intercanine widths, upper basal arch widths, lower basal arch widths were statistically significant between musical wind instrument players groups (Class A, Class B) and non-wind musical instrument players group. 2 The mean value of upper intercanine width m Class A ($373{\pm}2.3mm$) was greater than than in Class B ($362{\pm}17mm$) and non-wind musical instrument players group($360{\pm}16mm$) 3 The mean value of lower basal arch width m Class B ($422{\pm}25mm$) was greater than that in non wind instrument players group ($395{\pm}28mm$). 4 The differences in the mean values of crowdings between Class A and Class Band non-wind instrument players group were not statistically significant.

• 대한치과의사협회지
• /
• 제11권2호
• /
• pp.123-129
• /
• 1973

The authors measured orthodontic force using the orthodontic materials of the Rocky Mountain Products Company. The results were as follows : ① Use latex of wide diameter in long distance, and when the latex of wide diameter activated by four or five times, we obtained a optimal force. ② The authors obtained canine retractions with sectional arch. Activation of sectional arch began at 1mm and had to do not activations of 3mm more. ③ The leveling started from .014 green round wire and finished to. 0.16" green Elgiloy round wire. Permit only a mild force in ideal arch form, in rectangular wire. ④ Fundamentaly, elastic thread obtained maximum force by activating as two times. ⑤ Coil spring obtained more heavy force from short distance than long distance.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.303-312
• /
• 1985

This study was designed to get the knowledge of the structural characteristics of the lingual dental arch shapes of Koreans. The subjects consisted of 107 normal occlusions. The lingual structure which was divided into two groups, anterior and posterior part, was measured and analyzed. 33 pairs of the 107 samples were used to test the derived results. The findings of this study were as follows: 1. The mathmatical functions of the 12 curves which showed good fitting to the upper and lower anterior lingual arch were derived and flawed to the same scale using the computer graphics. 2. The results of the test showed a reasonable degree of accuracy to all of the 33 random samples. 3. The average degrees of posterior flexions were obtained and could be used as a initial guide at the wire-bending.

• 대한치과의사협회지
• /
• 제12권7호
• /
• pp.456-459
• /
• 1974

• 대한치과의사협회지
• /
• 제27권12호통권247호
• /
• pp.1129-1142
• /
• 1989

• 대한치과보철학회지
• /
• 제54권1호
• /
• pp.49-56
• /
• 2016

과도한 마모 같은 잔존 치아 구조의 파괴는 전치유도와 저작 기능에 심각한 손상을 초래할 수 있다. 이런 증상을 개선시키기 위해서는 상실된 구치부를 수복하여 적절한 교합을 회복시켜주는 것이 필수적이다. 구치부의 무치악부를 수복하기 위해서는 의치나 임플란트가 사용될 수 있는데, 임플란트로 수복시에는 경제적인 제약으로 위해 shortened dental arch 개념을 적용하는 것이 유리할 수 있다. 본 증례는 86세 남환으로, 다수의 치아가 상실되어 있었고, 구치부 교합의 붕괴와 과도한 치질 소실, 수직 피개를 관찰할 수 있었다. 구치부에서 붕괴된 교합을 재형성해주는 것을 최우선 과제로 정하였으며, 가철성 보철물 대신, 국민건강보험이 적용된 2개의 임플란트와 고정성 국소의치, 레진을 이용하여 보철 수복을 완료하였다. 소구치 부위에서 2 mm의 수직고경을 거상하였으며, shortened dental arch 개념을 적용하였다. 이를 통해 전악 수복에 비하여 적은 비용으로 이를 대체하는 치료를 고정성 보철물로 할 수 있었으며, 심미적, 기능적으로 양호한 결과를 얻었다.

• 치위생과학회지
• /
• 제12권6호
• /
• pp.617-623
• /
• 2012

본 연구는 치과용 모형재 중 4형(type IV)석고와 스캔용(scannable)석고를 이용하여 작업모형을 제작한 후, 치과용 백색광 스캐너를 이용하여 3차원 디지털 모형으로 전환한 데이터의 계측지점간 거리를 측정하여, 그 결과 값을 토대로 이종의 치과용 석고가 3차원 디지털 모형의 크기재현 시 정확성여부를 비교하였다. 본 실험을 통하여 치과용 모형재에 따른 3차원 디지털 모형의 정확도를 확인함으로써 임상 적용의 가능성을 평가하였으며, 제한된 조건 하에서 수행된 본 연구에서 다음과 같은 결론을 얻었다. 1. 치과용 백색광 스캐너를 사용하여 주 모형과 두 종류의 모형재로 제작한 작업모형을 3차원 디지털 모형으로 전환한 후, 선계측의 값을 비교한 결과 전체적인 계측지점에서 모두 모형재로 제작된 작업모형이 작게 계측되는 경향을 보였다. 2. 각 모형별 동일한 계측지점의 계측값의 차이가 있는지 알아보기 위해 paired t-test의 시행결과, 모든 계측지점에서 통계적으로 유의한 차이를 보였다(p<0.05). 결론적으로 두 가지 석고 모두 통계적으로 적정한 수준의 정확성을 나타내지 않았으나, 오차 수준이 선행연구에 비추어 볼 때 임상적으로 수용 가능한 수준이라 생각된다. 전악 인상채득을 통한 디지털 모형의 정확성은 검증이 되었으나, 스캔용(scannable)석고에 대한 임상 효용성을 판단하기 위해 타 제품과의 성분 분석 비교연구나 실질적인 보철물 제작을 통한 적합도 평가를 통해 CAD/CAM 보철물 제작 시장점을 부각할 수 있는 연구가 뒷받침되어야 할 것으로 사료된다.

• 한국치위생학회지
• /
• 제12권6호
• /
• pp.1082-1089
• /
• 2012

Objectives : The aim of this study was to determine the accuracy of digitized stone models, impression materials compared to the master model and the reliability of the computer aided analysis. Methods : A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Ten vinyl polysiloxane impressions(Examix$^{(R)}$, GC Industrial Corp, Japan) of master model were taken and type IV stone(aesthetic-base gold$^{(R)}$, Dentona, Germany) were poured in stone models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK). The t-student test for paired samples was used for statistical analysis. Results : The mean differences to master model for stone model and impression material were 0.11~0.19mm, and 0.19~0.29mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between master model and stone model/impressions(p<.05). Conclusions : Two different scanning methods showed clinically acceptable accuracy of full arch digital impression produced by them. These results will have to be confirmed in further clinical studies.

• 대한치과의사협회지
• /
• 제55권12호
• /
• pp.842-849
• /
• 2017

The term, 'crossed occlusion' implies clinical situation in which the residual teeth in one arch have no contact with those in the antagonistic arch, resulting in the collapse of occlusal vertical dimension. The treatment goal of this pathologic condition is restoration of the collapsed vertical dimension and stabilization of abnormal mandibular position. Previously, konus removable prostheses or tooth supported overdentures were suggested to solve crossed occlusion. Nowadays, dental implants have been used for definitive support to solve this problem. In this case report, a 65 years old female patient had a crossed occlusion, in which the maxillary posterior residual teeth and mandibular anterior residual teeth cross. Interim removable and fixed dental prostheses were used to confirm the proper vertical and horizontal jaw relation. After that, the mandibular posterior edentulous region was restored with implant-supported fixed dental prostheses. Computer tomography guided implant surgery was performed according to the concept of the restoration-driven implant placement. The maxillary anterior edentulous region was restored with Kennedy class IV removable prosthesis, considering the patient's economic status. The patient's jaw position and prostheses have been well maintained at the follow-up after 6 months of definitive restoration. The antero-posterior crossed occlusion problems appeared to be effectively solved with the combination of removable in one arch and implant-supported fixed prostheses in the other.