• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.886-888
• /
• 2009

We fabricated flexible electronic paper display(EPD) by using toner particles on plastic (PC) substrate. We observed the relationship between contrast ratio and changes of rib structures. One is a fabrication of ribs on bottom substrate. The display with ribs on bottom substrate had higher contrast ratio about 46% than display with ribs on top substrate. The other is a change of density of rib. The less density of ribs fabricated, the higher the contrast ratio become.

• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.47-56
• /
• 2007

본 연구에서는 자갈혼합률을 다르게 준비한 자갈-모래 혼합시료가 등방압밀 및 $K_0$-이방압밀 상태에서 나타나는 액상화거동에 대해서 연구하였다. 이를 위하여 자갈혼합률이 다른 자갈-모래 혼합토 공시체를 100kPa의 연직응력으로서 상대밀도가 40% 되도록 등방압밀 및 $K_0$-이방압밀 시킨 후 반복삼축시험을 수행하였다. 또한 자갈혼합률이 0%, 10%, 20%, 30%인 공시체에 100 kPa의 연직응력으로서 간극비가 0.7이 되도록 등방압밀 후 반복시험도 실시하였다. 시험결과 동일한 상대밀도(Dr=40%)를 가지는 자갈-모래 혼합토 공시체의 간극비는 자갈혼합률이 증가할수록 감소하다가 약 70%를 저점으로해서 다시 증가한다. 그러나 이 경계혼합률 이하에서는 자갈입자 사이를 채우고 있는 모래의 간극비는 자갈혼합률이 증가할수록 증가한다. 상대밀도가 일정한 (Dr=40%)등방압밀 공시체에 있어서 자갈혼합률이 비교적 낮은 경우(GC=0%, 20%, 40%)에는 반복하중에 의해서 일어나는 간극수압과 축변형률 거동이 비교적 높은 간극비로 인해서 느슨한 모래의 거동을 나타내나, 자갈혼합률이 높은 경우(GC=70%)에는 간극수압과 축변형률 거동이 조밀한 모래의 거동과 비슷한 경향을 보인다. 또한 간극비가 일정한(e=0.7) 등방압밀 공시체에 있어서 자갈혼합률이 높을수록 축변형률과 간극수압 거동은 느슨한 모래의 거동을 보이며 자갈혼합률이 낮을수록 축변형률 거동은 조밀한 모래의 거동을 나타낸다. 등방압밀 공시체의 액상화강도는 경계혼합률(GC=70%)이하의 범위에서는 상대밀도가 일정한 경우에는 자갈혼합률이 증가할수록 증가하며 간극비가 일정한 경우는 자갈혼합률이 증가할수록 감소한다. 따라서 자갈-모래 혼합토의 액상화강도는 예상과는 달리 자갈 입자 사이를 채우고 있는 모래의 상대밀도 보다는 혼합토의 전체적인 상대밀도 및 간극비에 의해서 결정된다는 사실이 확인되었다. $K_0$-이방압밀 공시체의 간극수압과 축변형률 거동은 반복응력이 어느 정도의 응력반전을 포함하고 있는데도 불구하고 응력반전이 없는 경우의 사질토의 거동을 나타낸다. 즉 응력반전량이 반복응력 진폭의 약 10%인데도 불구하고 반복변형률은 비슷하나 영구변형률이 크게 증가하며 또한 간극수압비는 1.0에 미달하여 초기액상화가 일어나지 않는다. 그리고 액상화강도는 자갈촌합률이 증가할수록 0%에서 40%까지의 범위에서는 증가하나 그 이상에서는 감소하는 경향을 보인다. 결론적으로 자갈-모래 혼합토의 반복거동은 자갈혼합량, 간극비, 상대밀도 그리고 압밀상태와 같은 요인에 의해 결정된다.

• 성인간호학회지
• /
• 제20권6호
• /
• pp.917-931
• /
• 2008

Purpose: This study was aimed to determine the optimum low-density lipoprotein : high-density lipoprotein-cholesterol (LDL : HDL-C) ratio for predicting coronary heart disease(CHD) in Korean people. Methods: It was analyzed this data of 5,431 adults who had undergone health examinations in a hospital in Gyeonggi-do between January 2006 and December 2007. The covariation of the coronary risk factors such as age, HbA1C, systolic blood pressure(SBP), and waist-to-stature ratio(WSR) were analyzed by using logistic regression analysis. Results: The LDL : HDL-C ratio in the male and female groups was mostly distributed between 1.5 and 4.0. The LDL : HDL-C ratio was the most significant cholesterol-related parameter influencing CHD (male: B = .306, p = .054, female : B = .940, p = .010), followed by LDL-C and total cholesterol. It was observed a sharp increase in the odds ratios for LDL : HDL-C ratios of 2.25 - 2.50(male) and 2.00 - 2.25(female). A significant difference was observed in both male(2.25 : $x^2$ = 2.494, p = .072) and female(2.00 : $x^2$ = 413.742, p = .000) groups. Conclusion: The risk level of CHD was set to 2.25 for males and 2.00 for females. Therefore, the optimum LDL : HDL-C ratio for Koreans should be far lower than that for the people in western countries.

• Communications for Statistical Applications and Methods
• /
• 제31권3호
• /
• pp.349-363
• /
• 2024

Compositional data refers to data where the sum of the values of the components is a constant, hence the sample space is defined as a simplex making it impossible to apply statistical methods developed in the usual Euclidean vector space. A natural approach to overcome this restriction is to consider an appropriate transformation which moves the sample space onto the Euclidean space, and log-ratio typed transformations, such as the additive log-ratio (ALR), the centered log-ratio (CLR) and the isometric log-ratio (ILR) transformations, have been mostly conducted. However, in scenarios with sparsity, where certain components take on exact zero values, these log-ratio type transformations may not be effective. In this work, we mainly suggest an alternative transformation, that is the square-root transformation which moves the original sample space onto the directional space. We compare the square-root transformation with the log-ratio typed transformation by the simulation study and the real data example. In the real data example, we applied both types of transformations to the USG% data obtained from NBA, and used a density based clustering method, DBSCAN (density-based spatial clustering of applications with noise), to show the result.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.348-348
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

• 대한간호학회지
• /
• 제36권6호
• /
• pp.933-941
• /
• 2006

Objective: The purpose of this study was to evaluate the effects of soybean intake on bone mineral density and bone turnover markers in postmenopausal rural Korean women. Method: This study was carried out during nine months from Oct. 25 2004 to Aug. 31 2005. The subjects of this study were female patients over 50 living in rural areas diagnosed with osteoporosis. There were 18 women in the experimental group and 20 in the control group. In this study, the experimental group received 100 mg of isoflavone (soybean) and calcium 1,500 mg for nine months while the control group received 1,500mg of calcium only. Results: After the soybean intake, the change of bone mineral density between the experimental group and control group was statistically significant. However, the bone turnover markers of osteocalcin and deoxypyridinoline between the experimental group and control group were not significantly different statistically. In the Pearson Correlation between bone mineral density and bone turnover markers, the osteocalcin and deoxypyridinoline of the experimental group had a positive correlation, and osteocalcin and DPD/osteocalcin ratio had anegative correlation. In the control group, osteocalcin and DPD/osteocalcin ratio had a negative correlation. Conclusions: This result showed that soybean intake changed bone mineral density in postmenopausal woman.

• Advances in materials Research
• /
• 제6권1호
• /
• pp.79-91
• /
• 2017

In the present work, a design of experiment (DOE) technique using Taguchi method, has been applied to optimize the properties of ODS tungsten heavy alloys(WHAs). In this work Taguchi method involves nine experiments groups for four processing parameters (compaction pressure, sintering temperature, binding material type, and oxide type) with three levels was implemented. The signal-to-noise (S/N) ratio and analysis of variance (ANOVA) were employed to obtain the optimal process parameter levels and to analyze the effect of these parameters on density, electrical conductivity, hardness and compressive strength values. The results showed that all the chosen factors have significant effects on all properties of ODS tungsten heavy alloys samples. The density, electrical conductivity and hardness increases with the increase in sintering temperature. The analysis of the verification experiments for the physical properties (density and Electrical conductivity) has shown that Taguchi parameter design can successfully verify the optimal parameters, where the difference between the predicted and the verified values of relative density and electrical conductivity is about 1.01% and 1.15% respectively.

• The Korean Journal of Ecology
• /
• 제19권5호
• /
• pp.393-402
• /
• 1996

Density fluctuations of soil microarthropods at the Piagol, Mt. Chiri was assessed on the basis of 113, 096 individuals collected from March 1993 to February 1994. Of 6 classes, and 18 orders, the Arachnida and Insecta were the most numerous members with abundance of 51.4% and 46.3%, respectively. The mean density of the Acari was $13, 310/m^2$ of microarthropods. The Acari were abundant in autumn and less found in winter and the density fluctuation of the Collembola followed a similar trend. The vertical distribution of the mesofauna revealed from the soil samples taken from the surface to 5 and from 5 to 10 cm in depths was as follows. In 5~10 cm layer. Collembola was numerous with abundance of 54.7%, followed by 40.1% fo Acari and the soil microarthropods reached the highest density peak in spring, while the lowest in winter. Populations concentrated in the 0~5 cm layer as much as 62.2% throughtout the season and 82.4% throughtout the altitudes. The Acari / Collembola (A/C) ratio in the 0~5 cm layer was higher than that in the 5~10 cm.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.57-64
• /
• 1999

This research was carried out to investigate the effects of density, resin and particle types on the physical and mechanical properties of the composites made from various wood particles mixed with coating paper. The experiment was designed to apply with three particles (flake, chip, and fiber) and three resin types (urea, phenol and PMDI resin). The mixed ratio of coating paper to wood particle was fixed on 50 to 50% in each board making. And also it was designed to apply for four density levels (0.6, 0.7, 0.8 and 0.9 g/$cm^3$) and four mixed formulations of coating paper to wood particle (10:90, 20:80, 30:70, and 40:60 %) to analyze clearly the effects of PMDI resin. Coating paper-wood particle composites have acceptable bending strength (MOR, MOE) though the mixed ratio of coating paper was increased, but have low internal bond strength and poor dimensional stability (WA, TS, LE). Composites with high density had higher mechanical properties but showed lower physical properties than composites with low density. In conclusion, at least up to 20% mixed ratios, coating paper-wood particle composites have acceptable physical and mechanical properties, and PMDI resin has possibility for coating paper-wood particle composite manufacture.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권3호
• /
• pp.156-160
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem and root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe and Ne:Ar mixed gas lamp improve firing voltage of Xe gas lamp. Purpose of this study is to understand ideal mixing-ratio of Ne:Xe and Ne:Ar gas by electron temperature and electron density for mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by single-Langmuir probe. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe and Ne:Ar.