Browse > Article
http://dx.doi.org/10.12989/amr.2017.6.1.079

Application of Taguchi method in optimization of process parameters of ODS tungsten heavy alloys  

Sayed, Mohamed A. (Department of Mechanical Engineering, Faculty of Engineering, Helwan University)
Dawood, Osama M. (Department of Mechanical Engineering, Faculty of Engineering, Helwan University)
Elsayed, Ayman H. (Department of Powder Technology, Central Metallurgical R&D Institute (CMRDI))
Daoush, Walid R. (Department of Production Technology, Faculty of Industrial Education, Helwan University)
Publication Information
Advances in materials Research / v.6, no.1, 2017 , pp. 79-91 More about this Journal
Abstract
In the present work, a design of experiment (DOE) technique using Taguchi method, has been applied to optimize the properties of ODS tungsten heavy alloys(WHAs). In this work Taguchi method involves nine experiments groups for four processing parameters (compaction pressure, sintering temperature, binding material type, and oxide type) with three levels was implemented. The signal-to-noise (S/N) ratio and analysis of variance (ANOVA) were employed to obtain the optimal process parameter levels and to analyze the effect of these parameters on density, electrical conductivity, hardness and compressive strength values. The results showed that all the chosen factors have significant effects on all properties of ODS tungsten heavy alloys samples. The density, electrical conductivity and hardness increases with the increase in sintering temperature. The analysis of the verification experiments for the physical properties (density and Electrical conductivity) has shown that Taguchi parameter design can successfully verify the optimal parameters, where the difference between the predicted and the verified values of relative density and electrical conductivity is about 1.01% and 1.15% respectively.
Keywords
oxide dispersion strengthened; tungsten heavy alloys; Taguchi method; S/N ratio; ANOVA; density; electrical conductivity;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Kamaruddin, S., Khan, Z.A. and Wan, K.S. (2004), "The use of the Taguchi method in determining the optimum plastic injection moulding parameters for the production of a consumer product", J. Mekan., 18(1), 98-110.
2 Kasman, S. (2013), "Impact of parameters on the process response: A Taguchi orthogonal analysis for laser engraving", Measure., 46(8), 2577-2584.
3 Kim, Y., Lee, K.H., Kim, E.P., Cheong, D.I. and Hong, S.H. (2009), "Fabrication of high temperature oxides dispersion strengthened tungsten composites by spark plasma sintering process", J. Refract. Met. Hard Mater., 27(5), 842-846.   DOI
4 Lee, K.H., Cha, S.I., Ryu, H.J., Dilmore, M.F. and Hong, S.H. (2007), "Effect of mechanical alloying process on microstructure and mechanical properties of ODS tungsten heavy alloys", J. Alloy. Comp., 434, 433-436.
5 Lee, K.H., Cha, S.I., Ryu, H.J. and Hong, S.H. (2007), "Effect of oxide dispersoids addition on mechanical properties of tungsten heavy alloy fabricated by mechanical alloying process", Mater. Sci. Eng. A, 452, 55-60.
6 Raghunath, N. and Pandey, P.M. (2007), "Improving accuracy through shrinkage modeling by using Taguchi method in selective laser sintering", J. Mach. Tool. Manufact., 47(6), 985-995.   DOI
7 Rohit, G. (2010), "Effect of process parameters on performance measures of wire electrical discharge machining", Doct. Philos., 1-284.
8 Roy, R.K. (2001), Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement, John Wiley and Sons, Inc., U.S.A.
9 Ryu, H.J. and Hong, S.H. (2003), "Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys", Mater. Sci. Eng. A, 363(1), 179-184.   DOI
10 Sadhana. (2011), "Optimization of processing parameters in induction hardening using response surface methodology", Ind. Acad. Sci., 36(2), 141-152.
11 Zu, Y. and Lin, S. (1997), "Optimizing the mechanical properties of injection molded W-4.9%Ni-2.1%Fe in debinding", J. Mater. Process. Technol., 71(2), 337-342.   DOI
12 Veleva, L. (2011), "Contribution to the production and characterization of W-Y, W-$Y_2O_3$ and W-TiC materials for fusion reactors", Doct. Philos., 1-164.
13 Velevaa, L., Oksiuta, Z., Vogtb, U. and Baluca, N. (2009), "Sintering and characterization of W-Y and W-$Y_2O_3$ materials", Fus. Eng. Des., 84(7), 1920-1924.   DOI
14 YiIdiz, T. and Gur, A.K. (2011), "The optimization of abrasive wear behavior of FeCrC coating composite with Taguchi method", Austr. J. Bas. Appl. Sci., 5(12), 2394-2402.
15 Ibrahim, A., Abdallah, M., Mostafa, S.F. and Hegazy A.A. (2009), "An experimental investigation on the W-cu composites", Mater. Des., 30(4), 1398-1403.   DOI
16 Akhgar, B.N., Pazouki, M., Ranjbar, M., Hosseinnia, A. and Salarian, R. (2012), "Application of Taguchi method for optimization of synthetic rutile nano powder preparation from ilmenite concentrate", Chem. Eng. Res. Des., 90(2), 220-228.   DOI
17 Berginc, B., Kampus, Z. and Sustarsic, B. (2006), "The use of the Taguchi approach to determine the influence of injection-moulding parameters on the properties of green parts", J. Achieve. Mater. Manufact. Eng., 15(1-2), 63-70.
18 Bhutt, S.K. (2003), "Taguchi approach to design of experiments", Depart. Informat. Syst., 2042, 47-51.
19 Janmanee, P. and Muttamara, A. (2011), "Optimization of electrical discharge machining of composite 90WC-10Co base on Taguchi approach", Eur. J. Sci. Res., 64(3), 426-436.
20 Ji, C.H., Loh, N.H., Khor, K.A. and Tor, S.B. (2001), "Sintering study of 316l stainless steel metal injection molding parts using Taguchi method: Final density", Mater. Sci. Eng. A, 311(1), 74-82.   DOI
21 Jing-lian, F., Tao, L., Hui-chao, C. and Deng-long, W. (2008), "Preparation of fine grain tungsten heavy alloy with high properties by mechanical alloying and yttrium oxide addition", J. Mater. Process. Technol., 208(1), 463-469.   DOI