• Current Applied Physics
• /
• 제18권11호
• /
• pp.1447-1450
• /
• 2018

The electron spin resonance (ESR) detects point defect of the In-Ga-Zn oxide (IGZO) like singly ionized oxygen vacancies and excess oxygen, and get spin density as a parameter of defect state. So, we demonstrated the spin density measurement of the IGZO film with various deposition conditions and it has linear relationship. Moreover, we matched the spin density with the total BTS and the threshold voltage ($V_{th}$) distribution of the IGZO thin film transistors. The total BTS ${\Delta}V_{th}$ and the $V_{th}$ distribution were degraded due to the spin density increases. The spin density is the useful indicator to predict $V_{th}$ instability of IGZO TFTs.

• Communications for Statistical Applications and Methods
• /
• 제26권6호
• /
• pp.583-589
• /
• 2019

Counterexamples of a skew-normal distribution are developed to improve our understanding of this distribution. Two examples on bivariate non-skew-normal distribution owning marginal skew-normal distributions are first provided. Sum of dependent skew-normal and normal variables does not follow a skew-normal distribution. Continuous bivariate density with discontinuous marginal density also exists in skew-normal distribution. An example presents that the range of possible correlations for bivariate skew-normal distribution is constrained in a relatively small set. For unified skew-normal variables, an example about converging in law are discussed. Convergence in distribution is involved in two separate examples for skew-normal variables. The point estimation problem, which is not a counterexample, is provided because of its importance in understanding the skew-normal distribution. These materials are useful for undergraduate and/or graduate teaching courses.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.1112-1120
• /
• 2017

석유제품은 다양한 형태의 탄화수소화합물로 구성되어진 화합물로, 다른 종류의 액체류와 마찬가지로 온도변화에 따른 밀도와 부피의 변화가 발생한다. 액상에서 석유제품의 밀도를 측정하는 방법은 분별 증류된 각 석유제품에 대해 주로 얻어진 실험 데이터를 기반으로 한다. 본 연구에서는 등유와 자동차용 경유의 온도변화에 따른 밀도와 부피변화를 실제 측정하여 온도변화에 따른 변화추이를 분석하고, 국제규격인 ASTM에서 제시하는 밀도부피 환산표를 이용한 환산값을 계산하고 두 값을 비교분석하였다. 또한, 국내 계량 관련법에서 규정하고 있는 온도변화에 대한 기준과 실측값과의 상호 비교를 통해 차이점을 분석하였다.

• 자원환경지질
• /
• 제50권1호
• /
• pp.61-71
• /
• 2017

본 연구는 절리의 빈도 및 길이분포가 절리암반의 수리지질학적 특성에 미치는 영향을 평가하기 위하여 이차원 불연속절리망 (DFN; discrete fracture network) 유체유동 해석을 바탕으로 한 수치실험을 수행하였다. 두개의 절리군을 사용하여 절리의 빈도와 길이분포를 달리하며 추계론적으로 생성한 총 51개의 DFN 시스템에 대하여 $0^{\circ}$부터 매 $30^{\circ}$ 간격으로 총 12 방향으로 구현한 총 612개의 $20m{\times}20m$ DFN 블록에서 방향에 따른 블록수리전도도가 산정되었다. 또한, 각각의 DFN 시스템에서 이론적 블록수리전도도와 더불어 주 수리전도도텐서, 평균 블록수리전도도 등이 산정되었다. 절리군의 빈도의 증가 또는 길이의 평균 및 표준편차 증가에 따라 임의 방향으로의 블록수리전도도는 증가하며 DFN 시스템에 대한 등가연속체 취급 가능성이 높아지지만, 절리군 간의 빈도 차이가 커지면 블록수리전도도의 이방성 증대로 인하여 등가연속체 취급 가능성이 낮아질 수 있는 것으로 평가되었다. 두 절리군의 교차각이 작을수록 등가연속체 특성은 빈도 및 길이분포의 변화에 상대적으로 더욱 영향을 받는 것으로 평가되었다. 등가연속체로 취급하기 어려울 정도로 두 절리군의 교차각이 작아도 절리군의 빈도 또는 길이 분포가 증가하면 등가연속체 취급 가능성은 높아진다.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.600-612
• /
• 2014

In this paper, we consider the problem of spectrum sensing for advanced television systems committee (ATSC) digital television (DTV) signal detection. To exploit the cyclostationarity of the ATSC DTV signals, we employ spectral correlation density (SCD) as the decision statistic and propose an optimal detection algorithm. The major difficulty is in obtaining the probability distribution functions of the SCD. To overcome the difficulty, we probabilistically model the pilot frequency location and employ Gaussian approximation for the SCD distribution. Then, we obtain a practically implementable detection algorithm that outperforms the industry leading systems by 2-3 dB. We also propose various techniques that greatly reduce the system complexity with performance degradation by only a few tenths of decibels. Finally, we show how robust the system is to the estimation errors of the noise power spectral density level and the probability distribution of the pilot frequency location.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.1-4
• /
• 1988

The high frequency and quasi-state C-V curves were measured to determine the interface state density in MNOS devices. Berglund method was appropriate for determination of energy distribution of interface state density all over the energy gap. Applying Vg vs Øs relation by Berlund method to comparison-analysis method of the high-frequency and quasi-static C-V curves, we were able to determine the energy distribution by only measured C-V curves without theoretical C-V curves. The interface state density near the conduction band was high at lower temperature than room temperature.

• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.13-37
• /
• 2010

The performance of an electrodialyzer for concentrating seawater is predicted by means of a computer simulation, which includes the following five steps; Step 1 mass transport; Step 2 current density distribution; Step 3 cell voltage; Step 4 NaCl concentration in a concentrated solution and energy consumption; Step 5 limiting current density. The program is developed on the basis of the following assumption; (1) Solution leakage and electric current leakage in an electrodialyzer are negligible. (2) Direct current electric resistance of a membrane includes the electric resistance of a boundary layer formed on the desalting surface of the membrane due to concentration polarization. (3) Frequency distribution of solution velocity ratio in desalting cells is equated by the normal distribution. (4) Current density i at x distant from the inlets of desalting cells is approximated by the quadratic equation. (5) Voltage difference between the electrodes at the entrance of desalting cells is equal to the value at the exits. (6) Limiting current density of an electrodialyzer is defined as average current density applied to an electrodialyzer when current density reaches the limit of an ion exchange membrane at the outlet of a desalting cell in which linear velocity and electrolyte concentration are the least. (7) Concentrated solutions are extracted from concentrating cells to the outside of the process. The validity of the computer simulation model is demonstrated by comparing the computed results with the performance of electrodialyzers operating in salt-manufacturing plants. The model makes it possible to discuss optimum specifications and operating conditions of a practical-scale electrodialyzer.

• 천문학회보
• /
• 제41권1호
• /
• pp.46.1-46.1
• /
• 2016

The formation process of a current sheet is important for solar flare from a viewpoint of a space weather prediction. We therefore derive the temporal development of the spatial and statistical distribution of electric current density distributed in a flare-producing active region to describe the formation of a current sheet. We derive time sequence distribution of electric current density by applying a nonlinear force-free approximation reconstruction to Active Region 12158 that produces an X1.6-class flare. The time sequence maps of photospheric vector magnetic field used for reconstruction are captured by a Helioseismic and Magnetic Imager (HMI) onboard Solar Dynamic Observatory (SDO) on 10th September, 2014. The spatial distribution of electric current density in NLFFF model well reproduce observed sigmoidal structure at the preflare phase, although a layer of high current density shrinks at the postflare phase. A double power-law profile of electric current density is found in statistical analysis. This may be expected to use an indicator of the occurrence of a solar flare.

• 천문학논총
• /
• 제13권1호
• /
• pp.135-147
• /
• 1998

We have simulated the interaction of supernova remnants with constant ambient medium to explore the dynamics of Type Ia supernova remnant. We assumed the supernova ejecta density distribution of the central constant and the outer power-law density distribution$({\rho}{\propto}{\gamma}^{-n})$. We have calculated four different cases with different n. By scaling the length and time scales from the initial parameters-ejecta mass, ejecta energy, the ambient density, we could compare effects of the different density distribution of the ejecta on the dynamics of the SNRs. The radius of the outer forward shock converges the Sedov-Talyor solution at t' = 2.3 when the swept-up mass is 8 times of the ejecta mass. On the other hand, the motion of the reverse shock are largely affected by n. The ejecta with smaller n takes comparably long time to thermalize the whole ejecta at $t'{\simeq}5.3,\;M_{sw}{\simeq}18M_{ej}$. We have applied our calculated results to obtain the ejecta density distributions of Tycho and SN1006 with $n{\simeq}6$.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.759-765
• /
• 2011

This paper proposes an effective assistant model for considering the stator slot-opening effect on air gap flux density distribution in conventional interior-type permanent magnet (IPM) motor. Different from the conventional slot-opening effect analysis in surface-type PM (SPM) motor, a composite effect of slot-opening uniquely existing in IPM motor, which additionally causes enhancement of air gap flux density due to magnet flux path distortion in iron core between the buried PM and rotor surface. This phenomenon is represented by a proposed assistant model, which simply deals with this additional effect by modifying magnetic pole-arc using an effective method. The validity of this proposed analytical model is applied to predict the air gap flux density distribution in an IPM motor model and confirmed by finite element method (FEM).