• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.29-33
• /
• 2010

The purpose of LiDAR ground classification is to archive both goals which are acquiring confident ground points with high precision and describing ground shape in detail. In spite of many studies about developing optimized algorithms to kick out this, it is very difficult to classify ground points and describing ground shape by airborne LiDAR data. Especially it is more difficult in a dense forested area like Korea. Principle misclassification was mainly caused by complex forest canopy hierarchy in Korea and relatively coarse LiDAR points density for ground classification. Unfortunately, a lot of LiDAR surveying performed in summer in South Korea. And by that reason, schematic LiDAR points distribution is very different from those of Europe. So, this study propose enhanced ground classification method considering Korean land cover characteristics. Firstly, this study designate highly confident candidated LiDAR points as a first ground points which is acquired by using big roller classification algorithm. Secondly, this study applied weighted gradient kernel(WGK) algorithm to find and include highly expected ground points from the remained candidate points. This study methods is very useful for reconstruct deformed terrain due to misclassification results by detecting and include important terrain model key points for describing ground shape at site. Especially in the case of deformed bank side of river area, this study showed highly enhanced classification and reconstruction results by using WGK algorithm.

• Journal of the Korean Geographical Society
• /
• v.45 no.4
• /
• pp.431-443
• /
• 2010

The morphometric characteristics of 13 alluvial fans in the southern parts of the Korean Peninsula are studied and relationships between their distributions and causes are discussed by comparing them with 690 alluvial fans in Japan, Taiwan and the Philippines. The relationships between the surface gradient of alluvial fans and source basin area, the surface gradient and the relief ratio of the source basin, and the source basin area and the relief ratio were investigated. The alluvial fans in South Korea have typical characteristics of the Asian fans, although their frequency and density are relatively low, and the size and the relief ratio of their source basins are relatively small and steep, respectively. Moreover 36 major Korean river basins without alluvial fans tend to have lower altitude and relief ratios. Contrary to the argument by Blair and McPherson, the natural depositional gaps on the gradient of alluvial fans were not found. The Gyeongju alluvial fan is probably a fluvial fan with gentle gradient, whereas the other Korean fans seem to be debris-flow related on the base of their gradients.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.99-111
• /
• 2012

The purpose of this study is to identify the change of geographical (or geomorphological) location environment of the dwelling site and its cause in Daejon Basin during transition from the Bronze Age to the Proto Three Kingdoms Period. In order to achieve this goal, it was divided into (1) 'comparison of the total number of dwelling sites of a group of remains (or high-density dwelling remains)' and (2) 'comparison of the total number of dwelling sites in certain remains including locations of dwelling of two periods' and location environment was compared to each other in aspects of altitude, gradient, 'distance from the river of water available for use' and 'the difference between the highest altitude and lowest altitude of river bed of water available for use' based on change of period. The results were as follows: 1. looking at a change of individual factors, the altitude was elevated and the gradient was increased. The distance from the river of water available for use was decreased or increased in case of 'small scale river' and it was very little difference or increased in case of 'medium scale river'. The difference between the highest altitude and lowest altitude of river bed of water available for use was increased in case of 'small scale river' and it was increased or decreased in case of 'medium scale river'. If comparing the individual factors to each other, the increase and decrease of altitude, gradient and the difference between the highest altitude and lowest altitude of river bed of water available for use have the similar pattern. Especially, it was shown that the increase of gradient affected the increase of altitude and the difference between the highest altitude and lowest altitude of river bed of water available for use. In addition, it was shown that the increase and decrease of distance from the river of water available for use had the different pattern from those of altitude, gradient and 'the difference between the highest altitude and lowest altitude of river bed of water available for use'. 3. With above results, it was thought that combination of micro landform characteristics (eg. Characteristics of gradient) of low hills distributed within Daejeon Basin and rich aquatic environment surrounding the low hills affected the selection of location of dwelling sites at the time. Especially, it was shown that 'gradient and distance from the river of water available for use' were relatively more important factors for the inhabitants at the time to select the location of dwelling sites compared to 'altitude and difference between the highest altitude and lowest altitude of river bed of water available for use' upon selecting the location of dwelling.

• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.673-677
• /
• 2008

Calcia (CaO) stabilized cubic-$HfO_2$ is studied by density functional theory (DFT) with generalized gradient approximation (GGA). When a Ca atom is substituted for a Hf atom, an oxygen vacancy is produced to satisfy the charge neutrality. The lattice parameter of a $2{\times}2{\times}2$ cubic $HfO_2$ supercell then increases by $0.02\;{\AA}$. The oxygen atoms closest to the oxygen vacancy are attracted to the vacancy as the vacancy is positive compared to the oxygen ion. When the oxygen vacancy is located at the site closest to the Ca atom, the total energy of $HfO_2$ reaches its minimum. The energy barriers for the migration of the oxygen vacancy were calculated. The energy barriers between the first and the second nearest sites, the second and the third nearest sites, and the third and fourth nearest sites are 0.2, 0.5, and 0.24 eV, respectively. The oxygen vacancies at the third and fourth nearest sites relative to the Ca atom represent the oxygen vacancies in undoped $HfO_2$. Therefore, the energy barrier for oxygen migration in the $HfO_2$ gate dielectric is 0.24 eV, which can explain the origin of gate dielectric leakage.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.5
• /
• pp.190-195
• /
• 2014

Because of the temperature gradient occurring during the growth of the ingot with directional solidification method, defects are generated and the residual stress is produced in the ingot. Changing the growth and cooling rate during the crystal growth process will be helpful for us to understand the defects and residual stress generation. The defects and residual stress can affect the properties of wafer. Generally, it was found that the size of grains and twin boundaries are smaller at the top area than at the bottom of the ingot regardless of growth and cooling condition. In addition to that, in the top area of silicon ingot, higher density of dislocation is observed to be present than in the bottom area of the silicon ingot. This observation implies that higher stress is imposed to the top area due to the faster cooling of silicon ingot after solidification process. In the ingot with slower growth rate, dislocation density was reduced and the TTV (Total Thickness Variation), saw mark, warp, and bow of wafer became lower. Therefore, optimum growth condition will help us to obtain high quality silicon ingot with low defect density and low residual stress.

• 한국해양학회지
• /
• v.25 no.1
• /
• pp.36-48
• /
• 1990

This study was carried out to obtain some informations on the species composition and distribution pattern of Polychate community on the continental shelf and slope area in the East Sea. Fauna samples were collected from three sampling cruises in April of 1985, and April and October of 1987. Total 112 polychaete taxa included in 36 families were collected. Dominant species in the study area were Chaetozone setosa, Aglaophamus malmgreni, Ampharete arctica Terebellides horikoshii, Tharyx sp., and Magelona pacifica. Northern and cold water species were major contributors of polychaete communities in this study area. Dominant species showed their specific depth ranges from shelf area to upper slope and middle slope depth. The overall density was 300 indiv./m$\^$2/ and species richness was around 12 species/0.2m$\^$2/. Significant changes in mean polychaete density and species richness along depth gradient were found approximately at 600 m or deeper depth. Among physical factors, water depth, temperature and clay content, mean grain size were significantly correlated with the mean density of dominant species.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.77-85
• /
• 2010

Fingerprint image quality checking is one of the most important issues in on-line fingerprint recognition because the recognition performance is largely affected by the quality of fingerprint images. In the past, many related fingerprint quality checking methods have typically considered the local quality of fingerprint. However, It is necessary to estimate the global quality of fingerprint to judge whether the fingerprint can be used or not in on-line recognition systems. Therefore, in this paper, we propose both local and global-based methods to calculate the fingerprint quality. Local fingerprint quality checking algorithm considers both the condition of the input fingerprints and orientation estimation errors. The 2D gradients of the fingerprint images were first separated into two sets of 1D gradients. Then，the shapes of the PDFs(Probability Density Functions) of these gradients were measured in order to determine fingerprint quality. And global fingerprint quality checking method uses neural network to estimate the global fingerprint quality based on local quality values. We also analyze the matching performance using FVC2002 database. Experimental results showed that proposed quality check method has better matching performance than NFIQ(NIST Fingerprint Image Quality) method.

• Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2017

Background: Though the biomass of floral vegetation in understory plant communities in a forested ecosystem only accounts for less than 1% of the total biomass of a forest, they contain most of the floral resources of a forest. The diversity of understory honey plants determines visitation rate of pollinators such as honey bee (Apis mellifera) as they provide rich food resources. Since the flower visitation and foraging activity of pollinators lead to the provision of pollination service, it also means the enhancement of plant-pollinator relationship. Therefore, an appropriate management scheme for understory vegetation is essential in order to conserve pollinator population that is decreasing due to habitat destruction and disease infection. This research examined the diversity of understory honey plant and studied how it is related to environmental variables such as (1) canopy density, (2) horizontal heterogeneity of canopy surface height, (3) slope gradient, and (4) distance from roads. Vegetation survey data of 39 plots of mixed forests in Chuncheon, Korea, were used, and possible management practices for understory vegetation were suggested. Results: This study found that 113 species among 141 species of honey plant of the forests were classified as understory vegetation. Also, the understory honey plant diversity is significantly positively correlated with distance from the nearest road and horizontal heterogeneity of canopy surface height and negatively correlated with canopy density. Conclusions: The diversity of understory honey plant vegetation is correlated to vegetation structure and human impact. In order to enhance the diversity of understory honey plant, management of density and height of canopy is necessary. This study suggests that improved diversity of canopy cover through thinning of overstory vegetation can increase the diversity of understory honey plant species.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.303-310
• /
• 2017

Pressure retarded osmosis(PRO) has attracted much attention as potential technology to reduce the overall energy consumption for reverse osmosis(RO) desalination. The RO/PRO hybrid process is considered as the most logical next step for future desalination. The PRO process aims to harness the osmotic energy difference of two aqueous solutions separated by a semipermeable membrane. By using the concentrated water(RO brine) discharged from existing RO plants, the PRO process can effectively exploit a greater salinity gradient to reduce the energy cost of processing concentrated water. However, in order to use RO brine as the draw solution, PRO membrane must have high water flux and enough mechanical strength to withstand the high operational pressure. This study investigates the development of a thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on the overall power density was studied using the characteristic factors of PRO membranes. Finally, the performance test of an 8-inch spiral wound module was carried out under various operating conditions(i.e. hydraulic pressure, flow rate, temperature). As the flow rate and temperature increased under the same hydraulic pressure, the PRO performance increased due to the growth of water permeability coefficient and osmotic pressure. For a high performance PRO system, in order to optimize the operating conditions, it is highly recommended that the flow pressure be minimized while the flow rate is maintained at a high level.

• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.26-32
• /
• 1997

Quartz single crystals were grown hydrothermally and growth defects such as dislocations, etch channels and impurities were examined. Growth rates were 0.25-0.65 mm/day under the growth conditions of following. 1. Mineralizer: $4wt.\%$ NaOH. 2. Growth temperature: $340-360^{\circ}C$. 3. Temperature gradient: $20-40^{\circ}C$. 4. Seed: ZY plate. 5. Nutrient: synthetic quartz. Defects of the quartz which was grown with optical grade synthetic nutrient, low dislocation density seed and horizontal seed setting technique were as follows. 1. Dislocation density: 20.0 each/$cm^2$. 2. Etch channel density: 5.0 each/$cm^2$ (1st grade by IEC 758 standard). 3. Impurity (larger than 10$\mu$) concentration: 2.4 each/$cm^3$ (Ia grade by IEC 758 standard). 4. Alpha value: 0.019 (A grade by IEC 758 standard).