• 제목/요약/키워드: density dependent

검색결과 1,172건 처리시간 0.034초

Frequency-dependent C-V Characteristic-based Extraction of Interface Trap Density in Normally-off Gate-recessed AlGaN/GaN Heterojunction Field-effect Transistors

  • Choi, Sungju;Kang, Youngjin;Kim, Jonghwa;Kim, Jungmok;Choi, Sung-Jin;Kim, Dong Myong;Cha, Ho-Young;Kim, Hyungtak;Kim, Dae Hwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권5호
    • /
    • pp.497-503
    • /
    • 2015
  • It is essential to acquire an accurate and simple technique for extracting the interface trap density ($D_{it}$) in order to characterize the normally-off gate-recessed AlGaN/GaN hetero field-effect transistors (HFETs) because they can undergo interface trap generation induced by the etch damage in each interfacial layer provoking the degradation of device performance as well as serious instability. Here, the frequency-dependent capacitance-voltage (C-V) method (FDCM) is proposed as a simple and fast technique for extracting $D_{it}$ and demonstrated in normally-off gate-recessed AlGaN/GaN HFETs. The FDCM is found to be not only simpler than the conductance method along with the same precision, but also much useful for a simple C-V model for AlGaN/GaN HFETs because it identifies frequency-independent and bias-dependent capacitance components.

지반조건의 변화가 개단강관말뚝의 거동에 미치는 영향 (Effects of Soil Conditions on the Behavior of Open -Ended Steel Pipe Pile)

  • 백규호;이종섭;이승래
    • 한국지반공학회지:지반
    • /
    • 제9권3호
    • /
    • pp.23-34
    • /
    • 1993
  • 지반조건이 개단강관말뚝의 거동에 미치는 영향을 규명하기 위하여 응력상태와 상대밀도의 조절이 가능한 토조내에 포설된 모래지반에서 모형말뚝실험이 수행되었다. 모형말뚝은 개단강관 말뚝의 각 부분에 작용하는 지지력을 분리측정하기 위하여 직경이 다른 두개의 파이프로 만들어졌다. 실험결과에 의하면 모래지반에 타입된 개단말뚝의 폐색정도와 관입저항력은 지반의 수직응력보다는 수평응력과 상대밀도에 의하여 좌우되었으며, 관내토지지력과 외주면마찰력, 그리고 전체 지지력도 수직응력보다는 수평응력과 상대밀도에 의하여 주로 영향받는 것으로 나타났다. 또 한 말뚝 외벽에 작용하는 수평응력은 원지반의 응력상태와는 관계없이 조밀한 지반의 경우에는 원지반의 수평응력보다 크게, 보통상태의 지반에서는 원지반과 비슷하게, 그리고 매우 느슨한 지반에서는 원지반보다 작게 측정되었다. 원지반의 수평응력에 대한 말뚝 설치후의 말뚝 외벽에 작용하는 수평응력의 비는 주어진 모래지반의 경우 원지반의 수평응력과 관계없이 상대밀도에 따라 일정한 값으로 나타났다.

  • PDF

Wheel형 분무건조기에 반응표면법에 의한 치즈 분말의 특성 해석 (Analysis of Powder Characteristics of Cheese by Using RSM in Spray Dryer with Rotating Wheel Atomizer)

  • 강안수;여경목;김용렬;김복남;안형환;이한섭
    • 공업화학
    • /
    • 제7권6호
    • /
    • pp.1147-1155
    • /
    • 1996
  • Wheel형 분무건조기에서 식품첨가제로 사용되는 치즈분말의 건조공정을 반응표면법에 의하여 원료의 고형분함량, wheel 회전속도 및 출구온도를 독립변수로 하고 분말제품의 수분함량, 겉보기밀도, 분말 입자크기 및 현탁액의 점도를 종속변수로 하여 중심합성계획법에 따라 분산분석한 후 유의성과 상관관계를 검증하였다. 독립변수와 종속변수들의 상관관계를 검증한 결과 입자크기와 수분함량은 wheel의 회전속도가 커질수록 감소하였고, 겉보기밀도는 출구온도가 높아짐에 따라 감소하였다. 현탁액의 점도는 wheel의 회전속도와 고형분함량이 커짐에 따라 증가하였다. 분말제품의 종속변수들의 상관관계에서 수분함량과 겉보기밀도는 비례 관계, 입자크기는 수분함량과 겉보기밀도와 반비례의 관계를 나타내었다.

  • PDF

Analysis of ITO on Polymer Substrate by External Bending Force

  • Han, Jin-Woo;Kim, Young-Hwan;Kim, Jong-Hwan;Hwang, Jeoung-Yeon;Seo, Dae-Shik
    • Transactions on Electrical and Electronic Materials
    • /
    • 제6권4호
    • /
    • pp.149-153
    • /
    • 2005
  • In this paper, we investigated the island density-dependent stress distribution of indium-tin-oxide (ITO) film on polycarbonate substrate by external bending force. We used e-beam and RF­sputter for SiON, ITO sputtering. It was found that there are influence of island density on the substrate and decreasing crack density as goes to the minimum density. From the result that crack density was increasing at maximum island density, it is evident that more stress is imposed on same island position as island density.

골다공증에 따른 치조골 방사선사진농도와 하악하연두께의 변화에 대한 연구 (An Experimental Study of Radiographic Density of Alveolar Bone and Cortical Thickness of Mandible by Osteoporosis)

  • 이병도
    • Imaging Science in Dentistry
    • /
    • 제30권4호
    • /
    • pp.235-242
    • /
    • 2000
  • Purpose: To evaluate the effect of the systemic osteoporosis on radiographic density of alveolar bone and cortical thickness of mandible. Materials and Methods: The bone mineral density values of lumbar and femur were measured by dual-energy X-ray absorptiometry and T scores of lumbar, femur were obtained respectively. Radiographic densities of alveolar bones and panorama mandibular index (PMI, represents as cortical thickness) were analysed statistically according to age and T score variables. Results: The radiographic density of alveolar bone of maxillary molar showed significant difference by age and femur T group. That of mandibular molar showed significant difference between femur T group. Panorama mandibular index showed significant difference between age groups. Conclusion: The radiographic density of alvealar bones was more dependent on age and femur T than lumbar T. Cortical thickness of mandible was correlated with increasing age.

  • PDF

구치부 치관삭제가 생쥐 해마복합체에 미치는 영향에 관한 조직학적 연구 (Influence of Molarless Condition on the Hippocampal Formation in Mouse: a Histological Study)

  • 김용철;강동완
    • 구강회복응용과학지
    • /
    • 제23권2호
    • /
    • pp.179-186
    • /
    • 2007
  • The decrease of masticatory function caused by tooth loss leads to a decrease of cerebral blood flow volume resulting in impairment of cognitive function and learning memory disorder. However, the reduced mastication-mediated morphological alteration in the central nervous system (CNS) responsible for senile deficit of cognition, learning and memory has not been well documented. In this study, the effect of the loss of the molar teeth (molarless condition) on the hippocampal expression of glial fibrillary acidic protein (GFAP) protein was studied by immunohistochemical techniques. The results were as follows : 1. The molarless mice showed a lower density of pyramidal cells in the cornu ammonis 1 (CA1) and dentate gyrus (DG) region of the hippocampus than control mice. 2. Immunohistochemical analysis showed that the molarless condition enhanced the time-dependent increase in the cell density and hypertrophy of GFAP immunoreactivity in the CA1 region of the hippocampus. The molarless condition enhanced an time-dependent decrease in the number of neurons in the hippocampal formation and the time-dependent increase in the number and hypertrophy of GFAP-labeled cells in the same region. The data suggest a possible link between reduced mastication and histological changes in hippocampal formation that may be one risk factor for senile impairment of cognitive function and spatial learning memory.

Comparative Analysis of Growth-Phase-Dependent Gene Expression in Virulent and Avirulent Streptococcus pneumoniae Using a High-Density DNA Microarray

  • Ko, Kwan Soo;Park, Sulhee;Oh, Won Sup;Suh, Ji-Yoeun;Oh, TaeJeong;Ahn, Sungwhan;Chun, Jongsik;Song, Jae-Hoon
    • Molecules and Cells
    • /
    • 제21권1호
    • /
    • pp.82-88
    • /
    • 2006
  • The global pattern of growth-dependent gene expression in Streptococcus pneumoniae strains was evaluated using a high-density DNA microarray. Total RNAs obtained from an avirulent S. pneumoniae strain R6 and a virulent strain AMC96-6 were used to compare the expression patterns at seven time points (2.5, 3.5, 4.5, 5.5, 6.0, 6.5, and 8.0 h). The expression profile of strain R6 changed between log and stationary growth (the Log-Stat switch). There were clear differences between the growth-dependent gene expression profiles of the virulent and avirulent pneumococcal strains in 367 of 1,112 genes. Transcripts of genes associated with bacterial competence and capsular polysaccharide formation, as well as clpP and cbpA, were higher in the virulent strain. Our data suggest that late log or early stationary phase may be the most virulent phase of S. pneumoniae.

Frequency-constrained polygonal topology optimization of functionally graded systems subject to dependent-pressure loads

  • Thanh T. Banh;Joowon Kang;Soomi Shin;Lee Dongkyu
    • Steel and Composite Structures
    • /
    • 제51권4호
    • /
    • pp.363-375
    • /
    • 2024
  • Within the optimization field, addressing the intricate posed by fluidic pressure loads on functionally graded structures with frequency-related designs is a kind of complex design challenges. This paper thus introduces an innovative density-based topology optimization strategy for frequency-constraint functionally graded structures incorporating Darcy's law and a drainage term. It ensures consistent treatment of design-dependent fluidic pressure loads to frequency-related structures that dynamically adjust their direction and location throughout the design evolution. The porosity of each finite element, coupled with its drainage term, is intricately linked to its density variable through a Heaviside function, ensuring a seamless transition between solid and void phases. A design-specific pressure field is established by employing Darcy's law, and the associated partial differential equation is solved using finite element analysis. Subsequently, this pressure field is utilized to ascertain consistent nodal loads, enabling an efficient evaluation of load sensitivities through the adjoint-variable method. Moreover, this novel approach incorporates load-dependent structures, frequency constraints, functionally graded material models, and polygonal meshes, expanding its applicability and flexibility to a broader range of engineering scenarios. The proposed methodology's effectiveness and robustness are demonstrated through numerical examples, including fluidic pressure-loaded frequency-constraint structures undergoing small deformations, where compliance is minimized for structures optimized within specified resource constraints.