• 한국표면공학회지
• /
• 제18권3호
• /
• pp.105-115
• /
• 1985

Lead-tin-copper ternary alloy electrodeposition is conducted onto the inner bore surface of plain bearings as an overlay in order to investigate the effect of slot width, current density and fluoboric acid concentration on the uniformity of overlay. The thickness of overlay is analyzed by means of current distribution resulting from the overvoltage of plating bath and the apparent distance between cathode and anode. The result demonstrate that the uniformity of overlay is remarkably dependent of the slot size and current density, but has little bearing on the fluoboric acid concentration over 100g/L. This present study indicates that uniform overlay is obtainable within the tolerable thickness of ${\pm}2{\mu}m$ by using the slot width of 22mm. The surface morphology examination also shows the important role of concentration polarization of the micro-uniformity of overlay. The micro-uniformity has improved at the low concentration polarization which resulted from operating at the low current density and high fluoboric acid concentration. The surface morphology of deposits exhibits the vivid pyramid crystalline in the plating condition of low concentration polarizatio and all deposits have columnar structure parallel to the applied electric field regardless of the electroplating condition used.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.785-790
• /
• 1994

The active noise control which regards the acoustic power as a target function to be minimized, is analyzed to test its feasibility of which simplifies the measurement system compared with the global acoustic energy based active noise control system. In fact, it is found that the acoustic power based active noise control strategy is equally likely as good as the global acoustic energy based active noise control method if the acoustic field of interest is diffusive or very low model density one. In the intermediate model density field, we also demonstrate that the power based control gives the similar results as the energy based control in terms of global sound energy reduction for the lightly damped enclosure which might be most important system in practical application. From all the theoretical and power based control strategy is dependent on the characteristics of the acoustic field to be controlled; i.e., the model density distribution, the degree of reverberation, and on the strength of modal interaction of the control source with the primary source; i.e., the location of control source.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권2호
• /
• pp.107-114
• /
• 2001

Objectives : To compare jaw bone density of young adults (control group) and post-menopausal women(experimental group) in periapical and panoramic film. Materials and Methods : The bone mineral density values of lumbar and femur were measured by dual-energy X-ray absorptiometry(DEXA) and T scores of lumbar were obtained. T scores were classified into 3 group (T<-2.5, $-2.5{\leqq}T<-1$, $-1{\leqq}T$). Radiographic densities of alveolar bones were measured from interdental bones of premolar, molar areas in the maxilla and mandible and expressed into copper step wedge thickness by Scion $Image^{(R)}$ program. We considered these values of step wedge thickness as bone density of alveolar bone. Panorama mandibular index(PMI) was calculated by the method that the height of the inferior cortex of the mandible was divided by the height from the lower border of the mandible to the superior edge of the mental foramen. Bone density of alveolar bone and PMI were analysed statistically. Results : There were significant differences in bone mineral density of lumbar and femoral neck between control and experimental groups. There were also significant differences in bone density of premolar and molar area of jaw between control and experimental groups by MANOVA test. When considered lumbar T variables, there was only difference in interdental bone density of maxillary molar area between control and experimental group, but there was interaction. Interdental bone density of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. There was significant difference in PMI between control and experimental groups, but there was also inter action, thus, PMI of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. Conclusion : There were significant differences of alveolar density and cortical bone thickness between young men and post-menopausal women in periapical and panoramic film. These differences were dependent on lumbar T.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3405-3411
• /
• 2009

본 논문은 일개 농촌주민들을 대상으로 신체구성, 운동(과거 운동여부), 체력상태, 골밀도를 조사하고, 골밀도와의 관련된 요인을 파악하여 농촌 주민들의 골다공증 예방을 위한 기초자료를 제시하고자 143명을 대상으로 연구하였고, 결과로서 조사대상자들 연령이 증가할수록, 교육수준이 낮을수록 골밀도가 낮았으며(p<0.05), 만성질환이 있는 경우는 없는 경우보다 골밀도가 낮았다(p<0.05). 그리고, 체중 BMI 체지방량 제지방량이 많이 나가는 경우가 낮은 경우보다 골밀도가 유의하게 높았으며(p<0.01), 과거 운동을 했던 경우와 기초 대사량이 높은 경우, 근육량이 많은 경우 골밀도가 높았다(p<0.01). 또한, 악력 윗몸일으키기 팔굽혀펴기 등 체력이 좋은 경우 골밀도가 높았으며(p<0.01), 골밀도 수치를 종속변수로 한 다중 회귀분석결과 연령, 만성질환 유무, 과거 운동유무가 유의한 변수로 나타났다.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2005년도 International Meeting of the Microbiological Society of Korea
• /
• pp.210.1-210
• /
• 2005

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.1-7
• /
• 1998

This paper reports a dispersion compensation technique to implement tje distortionless transmission line by satisfying the heaviside conditon. Because of the skin depth for aconductor, compensation condition is dependent on the freuqncy variation. For this reason, first, the resistance have been chaacterized in awide range of frequencies, and then found the effective conductivity of the substrate which satisfied the heaviside condition. The phase velocity and the characteristics impedance are prresented nearly constant over a wideband frequency range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.219-221
• /
• 1993

In this study, piezoceramics/polymer composites with 3-3 connectivity were made by BURPS(Burnout Plastic Sphere) technique with PZT ceramics and plastic sphere. And the properties dependent on the Dextrin wt.% were investigated. The density of porous piezoceramic and piezoceramic/polymer composites were decreased almost linearly with increasing the Dextrin wt.%.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.285-286
• /
• 2007

Current distributions according to electrode patterns in vertical structured InGaN/GaN LED (light emitting diode) were investigated quantitatively by utilizing three dimensional electrical circuit modeling method. The uniformity of the injected current density in the active layer was compared among different electrode patterns. It was found that the current uniformity was greatly dependent on the electrode pattern in vertical InGaN/GaN LEDs.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2173-2178
• /
• 2007

Dynamics of plasma sheath was analyzed using simple ion fluid model with poison equation. Incident ion current, energy, potential distribution and space charge density profile were calculated as a function of time. The effects of initial floating sheath on the evolution of biased sheath were compared with ideal matrix sheath. The effects of finite rising time of pulse bias voltage on the ion current and energy was studied. The influence of surface charging on the evolution of sheath was also investigated

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.366-371
• /
• 2003

In this paper, it was studied about the red-sensitive layer. UV-Vis data of the dye at monomeric and J-state were considered with respect to their performance(contrast, speed, density and fog) in photographic emulsion. The sensitizing effect of the dye is found to be strongly structure-dependent. Naphthctbiazolo carbocyanine dye can be used as red sensitizing dye for the spectral sensitization of photographic emulsion.