• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1038-1043
• /
• 2002

The demand for multimedia service using Ka-band satellite communication are growing rapi이y. So, in this paper, we have analyzed rain attenuation with typical model, and proposed prediction model of rain attenuation in high frequency(over 20[GHz]). Path loss model by rain attenuation is based upon rain rate of representative region(6 cities). Proposed prediction model of rain attenuation and parameter of satellite link can be available for the Ka-band satellite communication.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.887-896
• /
• 1994

It is common practice in the case of optimum reservoir operation model that the reservoir inflow series are generated by stochastic model with keeping other variable such as water demands from the reservoir constant. However, when the input and output of the water distribution system have close relationship the output variables can be stochastically generated in relation with the input variables. In the present study the reservoir inflow series, the input of the system, is generated by periodic autoregressive model with constant parameter, and the agricultural water demand series, the output, is generated using periodic multivariate autoregressive model with constant parameter. The time period of the data series generated is taken as 10-day which is the common period used for agricultural water uses. The results of data generation by two different models showed that the periodic stochastic models well represent the characteristics of the historical time series, and that in the case of generating model for agricultural demand series it has closer relation with reservoir inflow than with the series itself.

• Earthquakes and Structures
• /
• v.5 no.1
• /
• pp.49-65
• /
• 2013

This article presents the statistical characteristics of elastic floor acceleration spectra that represent the peak response demand of non-structural components attached to a nonlinear supporting frame. For this purpose, a set of stiff and flexible general moment resisting frames with periods of 0.3-3.6 sec. are analyzed using forty-nine near-field strong ground motion records. Peak accelerations are derived for each single degree of freedom non-structural component, supported by the above mentioned frames, through a direct-integration time-history analysis. These accelerations are obtained by Floor Acceleration Response Spectrum (FARS) method. They are statistically analyzed in the next step to achieve a better understanding of their height-wise distributions. The factors that affect FARS values are found in the relevant state of the art. Here, they are summarized to evaluate the amplification and/or reduction of FARS values especially when the supporting structures undergo inelastic behavior. The properties of FARS values are studied in three regions: long-period, fundamental-period and short-period. Maximum elastic acceleration response of non-structural component, mounted on inelastic frames, depends on the following factors: inelasticity intensity and modal periods of supporting structure; natural period, damping ratio and location of non-structural component. The FARS values, corresponded to the modal periods of supporting structure, are strongly reduced beyond elastic domain. However, they could be amplified in the transferring period domain between the mentioned modal periods. In the next step, the amplification and/or reduction of FARS values, caused by inelastic behavior of supporting structure, are calculated. A parameter called the response acceleration reduction factor ($R_{acc}$), has been previously used for far-field earthquakes. The feasibility of extending this parameter for near-field motions is focused here, suggested repeatedly in the relevant sources. The nonlinearity of supporting structure is included in ($R_{acc}$) for better estimation of maximum non-structural component absolute acceleration demand, which is ordinarily neglected in the seismic design provisions.

• The Journal of Society for e-Business Studies
• /
• v.23 no.3
• /
• pp.225-237
• /
• 2018

The demand for processing large data streams is growing rapidly as the generation and processing of large volumes of data become more popular. A variety of large data processing technologies are being developed to suit the increasing demand. One of the technologies that researchers have particularly observed is the data stream clustering with sliding windows. Data stream clustering with sliding windows may create a new set of clusters whenever the window moves. Previous data stream clustering techniques with sliding windows exploit the coresets, also known as group features that summarize the data. In this paper, we present some reformable elements of a group-feature based algorithm, and propose our algorithm that modified the clustering algorithm of the original one. We conduct a performance comparison between two algorithms by using different parameter values. Finally, we provide some guideline for the selective use of those algorithms with regard to the parameter values and their impacts on the performance.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.701-712
• /
• 2013

The e-learning industry status survey statistic provides information about the actual conditions of supply and demand of the e-learning industries. NIPA (National IT Industry Promotion Agency) has published the annual report of the survey results since 2004. Due to the 9th version of the KSIC (Korean standard industrial classification) revised in 2008, a refinement of the sampling design for the survey becomes necessary, especially that for the business demand sector. This article, based on the 9th revision of the KSIC, constructs a stratification of the target population used for the e-learning industry status survey on the business demand sector. Classification of strata in the business population is based on the industrial type and employment scale of business. Under the stratified population, we design a sampling scheme by using the power allocation method that enables us to satisfy a target coefficient of variation of each industrial stratum. In order to secure an accurate survey results based on the proposed sampling design, we consider the problem of calculating the design weights, derivation of parameter estimators, and formulas of their standard errors.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1799-1810
• /
• 2011

Origin-Destination(OD) trip survey being used in travel demand forecasting has been obtained through totalizing process with direct sample survey techniques such as plate license survey, roadside interview, household travel survey, and cordon line counts. However, the OD survey has many discrepancies in sampling, totalizing process, and such discrepancies contains problems of difference between forecasted traffic volume and observed data. On the other hand, transit smart card data recently collected has credible resource of obtaining travel information for bus and metro. This paper presents parameter estimation of gravity model by using transit smart card data. Through the parameter estimation method, we estimated =0.57, ${\beta}$=0.14 of gravity model for bus, and ${\alpha}$=-0.21, ${\beta}$=0.05 for metro. The statistical test such as T-test, coefficient of correlation, Theil`s inequality coefficient showed no difference between observed volume and estimated volume. Elasticities of bus and metro derived in this paper are also reasonable.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.333-339
• /
• 2016

Technology to optimize and utilize the use and supply of the electric power between consumer and supplier has been on the rise among the smart grid power market network in electric power demand management based on the Internet. Open Automated Demand Response system protocol, which can deliver Demand Response needed in electric power demand management to electricity supplier, system supplier and even the user is openADR 2.0b. This paper used the most credible, cosmopolitanly proliferated EPRI open source and analysed the variety of security vulnerability that developed VEN and VTN system may have. Using the simulator for attacking openADR protocol, the VEN/VTN system that has been implemented as EPRI open source was conducted to attack in a variety of ways. As a result of the analysis, we were able to get the results that the VEN/VTN system has security vulnerabilities to the parameter tampering attacks and service flow falsification attack. In conclusion, if you want to implement the openADR2.0b protocol system in the open or two-way communication environment smart grid network, considering a variety of security vulnerability should be sure to seek security technology and services.

• Structural Monitoring and Maintenance
• /
• v.5 no.3
• /
• pp.325-343
• /
• 2018

This study aims to propose a performance-based design method of a novel passive base isolation system, BIO isolation system, which is inspired by an energy dissipation mechanism called 'sacrificial bonds and hidden length'. Fragility functions utilized in this study are derived, indicating the probability that a component, element, or system will be damaged as a function of a single predictive demand parameter. Based on PEER framework methodology for Performance-Based Earthquake Engineering (PBEE), a systematic design procedure using performance and fragility objectives is presented. Base displacement, superstructure absolute acceleration and story drift ratio are selected as engineering demand parameters. The new design method is then performed on a general two degree-of-freedom (2DOF) structure model and the optimal design under different seismic intensities is obtained through numerical analysis. Seismic performances of the biologically inspired (BIO) isolation system are compared with that of the linear isolation system. To further demonstrate the feasibility and effectiveness of this method, the BIO isolation system of a 4-storey reinforced concrete building is designed and investigated. The newly designed BIO isolators effectively decrease the superstructure responses and base displacement under selected earthquake excitations, showing good seismic performance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.74-82
• /
• 2011

The Bass model is a cornerstone in diffusion theory which is used for forecasting demand of durables or new services. Three well-known estimation methods for parameters of the Bass model are Ordinary Least Square (OLS), Maximum Likelihood Estimator (MLE), Nonlinear Least Square (NLS). In this paper, a hybrid method incorporating OLS and NLS is presented and it's performance is analyzed and compared with OLS and NLS by using simulation data and empirical data. The results show that NLS has the best performance in terms of accuracy and our hybrid method has the best performance in terms of stability. Specifically, hybrid method has better performance with less data. This result means much in practical aspect because the avaliable data is little when a diffusion model is used for forecasting demand of a new product.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.15-21
• /
• 2010

Recently, there is a demand for a thermal imaging microscope in the medical field as well as the semi-conductor industry Although the demand of the advanced thermal imaging microscope has been increased, it is very difficult to obtain the technology of developing a thermal camera, because it is used for defense industry. We developed the ${\times}5$ zoom microscope which has $3\;{\mu}m$ spatial resolution to research the design and fabrication of the IR (Infrared) optical system. The optical system of the IR microscope consists of four spherical lenses and four aspheric lenses. We verified individual sensitivity of each optical parameter as the first order approach to the analysis. And we also performed structure and vibration analysis. The optical elements are fabricated using Freeform 700A. The measurement results of surface roughness and form accuracy using NT 2000 and UA3P are Ra 2.36 nm and P-V $0.13\;{\mu}m$. Finally we ascertained resolution power of $3\;{\mu}m$ using USAF (United State Air Force) 1951 IR resolution test chart.