• 한국식품영양과학회지
• /
• 제20권4호
• /
• pp.337-345
• /
• 1991

식이 단백질과 칼슘의 수준이 납중독된 흰쥐의 혈액학적 성상 및 신기능에 미치는 영향을 관찰하기 위해, 흰쥐에게 납 2,000ppm을 함유한 식수를 제한 없이 주면서, 식이 단백질과 칼슘 수준을 각각 3수준, 사육기간을 3주와 7주로 한, 3$\times$3$\times$2 요인 실험으로 설계하고 대조군을 별도로 설정하여 조사한 결과는 다음과 같다. 납 급여군의 체중 증가량, 식이 섭취량 및 식이 효율은 대조군에 비해 감소하였고, 단백급여 수준이 정상보다 높으면서 칼슘 급여 수준이 높을 때 높게 나타났다. 간장, 신장, 비장 및 뇌의 체중 100g당 무게는 대조군에 비해 증가하였으며, 식이 칼슘 수준이 낮을 수록 증가했다. 헤마토크릿치, 헤모글로빈 함량 및 적혈구 수는 납 급여군에서 감소를 보였고, 식이 단백질과 칼슘 수준이 낮을 수록 감소하는 경향이었다. 뇨중 $\delta$-aminolevulinic acid 배설량은 납 급여시 증가하였고, 식이 칼슘 함량이 낮을수록 증가하였다. 뇨중 포도당 배설량은 납 급여 시 증가하였고. 식이 단백과 칼슘 함량이 낮을 수록 높아지는 경향을 보였다. Creatinine clearance는 식이 단백과 칼슘 함량이 충분할 때는 납의 영향을 받지 않는 것으로 나타났다.

• Carbon letters
• /
• 제21권
• /
• pp.16-22
• /
• 2017

Cobalt was electrodeposited onto chemical vapor deposition (CVD) graphene/Si/$SiO_2$ substrates, during different time intervals, using an electrolyte solution containing a low concentration of cobalt sulfate. The intention was to investigate the details of the deposition process (and the dissolution process) and the resulting magnetic properties of the Co deposits on graphene. During and after electrodeposition, in-situ magnetic measurements were performed using an (AGFM). These were followed by ex situ morphological analysis of the samples with ${\Delta}t_{DEP}$ 30 and 100 s by atomic force microscopy in the non-contact mode on pristine CVD graphene/$SiO_2$/Si. We demonstrate that it is possible to electrodeposit Co onto graphene, and that in-situ magnetic measurements can also help in understanding details of the deposition process itself. The results show that the Co deposits are ferromagnetic with decreasing coercivity ($H_C$) and demonstrate increasing magnetization on saturation ($M_{SAT}$) and electric signal proportional to remanence ($M_r$), as a function of the amount of the electrodeposited Co. It was also found that, after the end of the dissolution process, a certain amount of cobalt remains on the graphene in oxide form (this was confirmed by X-ray photoelectron spectroscopy), as suggested by the magnetic measurements. This oxide tends to exhibit a limited asymptotic amount when cycling through the deposition/dissolution process for increasing deposition times, possibly indicating that the oxidation process is similar to the graphene surface chemistry.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.335-341
• /
• 2009

본 논문에서는 MLS기반 유한요소에 대한 현재 개발상황에 대한 개관과 향후 예상할 수 있는 응용분야에 대한 제안을 하였다. 이동최소제곱근사를 이용하여 형상함수를 생성하는 MLS기반 유한요소는, 요소의 경계에서 기존 유한요소의 성질-크로네커 델타 조건-을 가지면서도 기존 요소가 갖지 못했던 임의의 절점 추가가 자유롭다는 장점이 있어 다양한 변절점 요소로의 개발이 이루어져 왔다. 선형 또는 이차형상함수를 갖는 2차원 변절점요소 뿐 아니라, 균열선단과 균열면을 포함하고 있는 2차원 균열요소와 3차원에서의 제한적인 변절점요소 등이 개발되어 다양한 불연속성 문제에 적용 가능함이 입증되었다. 이러한 MLS기반 유한요소는 향후 2차원 변절점 3각요소, 2차원 삼각균열요소, 변절점 쉘요소, 균열 쉘요소, 마칭큐브알고리즘에 적합한 3차원 다면체요소로의 개발이 가능할 것으로 예상되며, 본 논문에서는 그 일례로 3차원 다면체요소를 이용한 대퇴골의 요소망 생성을 보였다.

• Elastomers and Composites
• /
• 제39권2호
• /
• pp.95-104
• /
• 2004

방진고무의 내한성을 향상시키기 위하여 NR 컴파운드에 유리전이온도가 상대적으로 낮은 BR을 섞거나 오일 함량을 늘리는 방법을 이용하여 새로운 컴파운드를 제작하였다. 저온환경에서 기계적물성 실험을 수행하여 NR/BR 조성비 및 오일 함량에 따른 영향을 조사하였다. BR 함량이 증가할수록 경도 및 모듈러스가 증가한 반면 인장강도 및 신율은 감소하였고, 오일 함량이 많을수록 경도, 모듈러스 및 인장강도는 감소하였으나 신율은 거의 변화가 없었다. NR/BR 블렌드 고무컴파운드는 NR과 BR의 유리 전이 온도인 $-50^{\circ}C$와 $-90^{\circ}C$에서 저장탄성계수의 급격한 전이와 손실계수인 tan ${\delta}$가 최대값을 보여 두 컴파운드간의 비상용성을 나타내었다.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.171-177
• /
• 1999

In the $(Pb_{1-x}M_x)[(Mn_{1/3}Sb_{2/3})_{0.05}Zr_yTi_{0.95-y}]O_3$ system, where M=Ca and Sr, the piezoelectric properties were evaluated to examine the possibility of application to piezoelectric transformer. A Rosen-type piezoelectric transformer was formed, then the electrical properties of voltage step-up ratio, frequency characteristics etc. were analysed. The morphotropic phase boundary was determined to be y=0.475 in $Pb[(Mn_{1/3}Sb_{2/3})_{0.05}Zr_yTi_{0.95-y}]O_3$ system and the piezoelectric properties of this composition was kp=0.59, Qm=1600 and $\varepsilon_r$=1150. Moreover, when 1-2 mol% of Sr are substituted, enhanced piezoelectric properties of kp=0.61, Qm=1600 and $\varepsilon_r$=1400 were shown. The temperature rising (ΔT) of a piezoelectric transformer with $Pb[Mn_{1/3}Sb_{2/3})_{0.05}Zr_{0.475}Ti_{0.475})]O_3 $ composition was $10^{\circ}C$, and the voltage step-up ratio was 500 when the output voltage was 4000V, whereas the ΔT was below $3^{\circ}C$ and the resonant frequency variation ($\Delta f_r$) as a function of load resistance was below 5% when the output voltage was 2000 V. These characteristics are superior to the properties of materials, which were substituted by Ca or without substitution.

• 한국조경학회지
• /
• 제14권1호
• /
• pp.45-60
• /
• 1986

The purpose of the present studies is to establish more rational and practical planning theory for trails of gradient. The results drawn from this research work are as follow ; Mean angle according to topography of Jiga road is $3^{\circ}$33'in low part, $8^{\circ}$17'in middle park and $12^{\circ}$48'in high part. Here, we can find that the highest gradient of Jige roacl is $12^{\circ}$48, Which is showing the fact that jigs road is the most function road when we compare other roads. The regression coefficient between potential model pattern and calculuted model pattern is 0.8 withinTEX>$ 0~<5^{\circ}$, 0.5 within$ 6~10^{\circ}$, and 0.53 within $11~16^{\circ}$. The linear of these model pattern is lower in R & L value, and lager in S & A value according to be steeping gradient. It is thought that these fact are closely related with between human fatigue and R.S.A.L value. Accordingly, when we plan the trails of the gradient in city park, the from of trails is right to mix straight line with curve line within $0~5^{\circ}$, and sine wave close curve line within $6~10 ^{\circ}$, $l1~16^{\circ}$. But, in fact, It is absurd that potential model pattern is applied to the city park in park of corner, widely road and facilities. Therefore, It is thought that the study of this problems will be proceeded in the future. I can reduce the following equation in relation R & S by gradient ; 22 log (R-6.0)=47.96-$\delta$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.336-337
• /
• 2005

ZnO varistor ceramics were fabricated as a function of the amount of $Y_2O_3$ addition and sintered at $1250^{\circ}C$ for 2 hour. The average grain size was decreased from 14.2 ${\mu}m$ to 8.3 ${\mu}m$ with the amount of $Y_2O_3$ addition, and varistor voltage was increased from 433 V to 563 V with $Y_2O_3$ addition. Nonlinear coefficient a of all specimens were increased with the amount of $Y_2O_3$ more than 67, in case of $Y_2O_3$ 0.01wt% addition showed the excellent results of 87. And leakage current was less than $1{\mu}A$ at 82% of varistor voltage. The clamping voltage ratio of the specimens added 0.01wt% $Y_2O_3$ was 1.41 at 25A [8/20${\mu}s$]. At the specimen 0.01wt% $Y_2O_3$ addition. endurance of surge current and deviation of varistor voltage were 5700A/$cm^2$ and $\Delta$-2.86%, respectively.

• 미생물학회지
• /
• 제40권1호
• /
• pp.7-11
• /
• 2004

eIF5B는 단백질합성의 개시 인자로서 Met-$tRNA^{Met}$을 AUG 개시코돈에 전달하고, 리보솜의 두 소단위체 결합을 유도한다. 이 인자의 기능을 연구할 목적으로 eIF5B를 코딩하는 FUN12 유전자의 5'말단 부위를 삭제하는 연구를 수행하였다. 프로모터의 대부분을 삭제한 FUN12를 함유한 pRS효모벡터를 FUN12가 삭제되어 천천히 자라는 돌연변이주 ($fun12{\Delta}g$)에 전달하였을 때 그 표현형을 부분적으로 상보하였다. 위와 같이 제조된 벡터에서 N-말단이 상실된 eIF5B 단백질이 발현되었고, 그 양이 정상 균주에서 발현되는 eIF5B 양의 약 5%에 불과하였다. 이와 같이 부분적으로 성장을 상보한 균주에서 발현된 적은 양의 단백질합성개시 인자 eIF5B는 직접적으로 그 성장을 제한하는 요소로 작용한다. 이러한 균주에서 성장의 제한인자인 eIF5B는 in vitro 에서도 역시 전체 단백질 합성의 활성을 조절하였다.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.644-649
• /
• 2011

[ $A_{3-2x/3}Al_{1-z}In_{z}O_4F:Eu_x^{3+}$ ](A = Ca, Sr, Ba, x = -0.15, z = 0, 0.1) oxyfluoride phosphors were simply prepared by the solid-state method at $1050^{\circ}C$ in air. The phosphors had the bright red photoluminescence (PL) spectra of an $A_{3-2x/3}Al_{1-z}In_{z}O_4F$ for $Eu^{3+}$ activator. X-ray diffraction (XRD) patterns of the obtained red phosphors were exhibited for indexing peak positions and calculating unit-cell parameters. Dynamic excitation and emission spectra of $Eu^{3+}$ activated red oxyfluoride phosphors were clearly monitored. Red and blue shifts gradually occurred in the emission spectra of $Eu^{3+}$ activated $A_3AlO_4F$ oxyfluoride phosphors when $Sr^{2+}$ by $Ca^{2+}$ and $Ba^{2+}$ ions were substituted, respectively. The concentration quenching as a function of $Eu^{3+}$ contents in $A_{3-2x/3}AlO_4F:Eu^{3+}$ (A = Ca, Sr, Ba) was measured. The interesting behaviors of defect-induced $A_{3-2x/3}Al_{1-z}In_{z}O_{4-{\alpha}}F_{1-{\delta}}$ phosphors with $Eu^{3+}$ activator are discussed based on PL spectra and CIE coordinates. Substituting $In^{3+}$ into the $Al^{3+}$ position in the $A_{3-2x/3}AlO_4F:Eu^{3+}$ oxyfluorides resulted in the relative intensity of the red emitted phosphors noticeably increasing by seven times.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.174-180
• /
• 2004

If Fiber Reinforced Metal Laminates(FRMLs) were delaminated, the decrease of stiffness and fiber bridging effect would result in the sudden aggravation of fatigue characteristics. It was reported that the delamination of FRMLs resulted from the crack of metal layers and that it depended on the crack growth. While cracks were made in FRMLs containing a saw-cuts under fatigue loading, cracks could be produced or not in FRMLs with circular holes under the same condition. When the FRMLs with the circular holes produce not the crack but the delamination, it is not possible to analyze it by the conventional fracture parameters expressed as the function of the crack. And so, this research suggests a new analytical model of the delamination to make the comparison of the delamination behavior possible whenever the cracks occur or not. Therefore, a new analytical model called Pseudo Crack Model(PCM) was suggested to compare the delaminations whether cracks were made or not. The relationship between the crack energy consumption rate( $E_{crack}$) and the delamination energy consumption rate( $E_{del}$) was discussed and it was also known that the effect of $E_{del}$ was larger than that of $E_{crack}$.