Browse > Article
http://dx.doi.org/10.3795/KSME-A.2004.28.2.174

Evaluation of Delamination for Fiber Reinforced Metal Laminates Using a Pseudo Crack Model  

Song, Sam-Hong (고려대학교 기계공학과)
Kim, Cheol-Woong (고려대학교 공학기술연구소 및 인덕대학 기계시스템)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.28, no.2, 2004 , pp. 174-180 More about this Journal
Abstract
If Fiber Reinforced Metal Laminates(FRMLs) were delaminated, the decrease of stiffness and fiber bridging effect would result in the sudden aggravation of fatigue characteristics. It was reported that the delamination of FRMLs resulted from the crack of metal layers and that it depended on the crack growth. While cracks were made in FRMLs containing a saw-cuts under fatigue loading, cracks could be produced or not in FRMLs with circular holes under the same condition. When the FRMLs with the circular holes produce not the crack but the delamination, it is not possible to analyze it by the conventional fracture parameters expressed as the function of the crack. And so, this research suggests a new analytical model of the delamination to make the comparison of the delamination behavior possible whenever the cracks occur or not. Therefore, a new analytical model called Pseudo Crack Model(PCM) was suggested to compare the delaminations whether cracks were made or not. The relationship between the crack energy consumption rate( $E_{crack}$) and the delamination energy consumption rate( $E_{del}$) was discussed and it was also known that the effect of $E_{del}$ was larger than that of $E_{crack}$.
Keywords
Fiber Reinforced Metal Laminates; Crack Growth Rate; Stress Intensity Factor Range; Pseudo Crack Model; Crack Energy Consumption Rate; Delamination Energy Consumption Rate;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Sam-Hong Song and Cheol-Woong Kim, 2003, 'Fatigue Crack and Delamination Behavior in the Composite Material Containing a Saw-cut and Circular Hole (I) - Aramid Fiber Reinforced Metal Laminates -,' Transaction of the KSME, A, Vol. 27, No. 1, pp. 58-65   과학기술학회마을   DOI
2 Sam-Hong Song and Cheol-Woong Kim, 2003, 'The Analysis of Fatigue Behavior Using the Delamination Growth Rate $(dA_D/da)$ and Fiber Bridging Effect Factor $F_{BE}$ in Al/GFRP Laminates,' Transaction of the KSME, A, Vol. 27, No. 2, pp. 317-326   과학기술학회마을   DOI
3 Jin-Ho Hwang and Woon-Bong Hwang, 1999, 'Effect of Crack Propagation Directions on the Interlaminar Fracture Toughness of Carbon/Epoxy Composite Materials,' Transaction of the KSME, A, Vol. 23, No. 6. pp. 1026-1038   과학기술학회마을
4 Huh J. S., Hwang W. B., Park H. C, and Han K. S., 1996, 'Fatigue Life Prediction of Circular Notched CFRP Laminates,' Transaction of the KSME, A, Vol. 20, No. 3, pp. 832-842   과학기술학회마을
5 Marissen R., 1988, 'Fatigue Crack Growth in ARALL ; A Hybrid Aluminum-Aramid Composite Material,' Ph. D. Thesis, Univ. of Delft, The Netherlands
6 Takamatsu T., Shimikawa T., Matsumura T., Miyoshi Y., and Tanabe Y., 2002, 'Evaluation of Fatigue Crack Growth Behavior of GLARE3 Fiber/metal Laminates Using a Compliance Method,' Engineering Fracture Mechanics, Vol. 37, No. 2, pp. 268-282
7 Toi Y., 1995, 'An Experimental Crack Growth Model for Fiber/metal Laminates,' 18th Symposium of ICAF, Melbourne, pp. 899-909
8 Nuismer R. J., and Whitney J. M., 1975, 'Uniaxial Failure of Composite Laminates Containing Stress Concentrations,' Fracture Mechanics of Composites, ASTM STP 593, pp. 117-121
9 Glyn Lawcock, Lin Ye and Yiu-Wing Mai, 1997, 'Progressive Damage and Residual Strength of a Carbon Fiber Reinforced Metal Laminates,' Journal of Composite Materials, Vol. 31, No. 8, pp. 762-787   DOI   ScienceOn
10 Akbar Afaghi-Khatibi and Lin Ye, 1997, 'Residual Strength Simulation of Fiber Reinforced Metal Laminates Containing a Circular Hole,' Journal of Composite Materials, Vol. 31, No. 19, pp. 1884-1904   DOI   ScienceOn
11 Sam-Hong Song and Cheol-Woong Kim, 2001, 'The Delamination and Fatigue Crack Propagation Behavior in A15052/AFRP Laminates Under Cyclic Bending Moment,' Transaction of the KSME, A, Vol. 25, No. 8, pp. 1277-1286   과학기술학회마을