• Title/Summary/Keyword: delta type

Search Result 998, Processing Time 0.021 seconds

Preparation of Yogurt from Milk Added with Purple Sweet Potato (자색고구마 첨가 요구르트의 제조 및 특성)

  • 전승호;이상욱;신용서;이갑성;류일환
    • The Korean Journal of Food And Nutrition
    • /
    • v.13 no.1
    • /
    • pp.71-77
    • /
    • 2000
  • New type yogurt base were prepared from milk added with skim milk powder or purple sweet potato, and fermented by lactic acid bacteria (Streptococcus thermophilus and Bifidobacterium infantis, 1:1, v/v). The yogurt proudcts were evaluated for acid production(pH, titratiable acidity), number of viable cell, viscosity, sensory properties, and color value. The composition of some organic acids was also analyzed by GC. The acid production slightly decrerased by addition with purple sweet potato. There was no significant difference in viable cell counts between control (yogurt added with only skim milk powder) and yogurt added with purple sweet potato, and viable cell counts of all samples were above 9.08 log cfu/ml. Viscosity of yogurt added with purple sweet potato(36,800∼46,000 centipoise) was higher than that of yogurt added with only skim milk powder(32,200 centipoise). The overall sensory score of yogurt added with purple sweet potato(38.6%, dry base) was the best of tested yogurt. The major organic acid of yogurt added with purple sweet potato was lactic acid. its content was 0.997∼1.203%. malic acid, succinic acid, oxalic acid, and fumaric acid were analyzed out a little. Lightness and yellowness decreased by addition with purple sweet potato but redness increased. Total color difference($\Delta$E) with yogurt addition with purple sweet potato and only skim milk powder were very high(above 11.46).

  • PDF

Geochemical Water Quality and Genesis of Carbonated Dalki Mineral Water in the Chungsong Area, Kungpook (경북청송지역 달기 탄산약수의 지화학적 수질특성과 생성기원)

  • 정찬호
    • Economic and Environmental Geology
    • /
    • v.32 no.5
    • /
    • pp.455-468
    • /
    • 1999
  • Carbonated mineral waters fo $Ca(Mg)-HCO_3$ type spring out fissure of Jurassic granite in the valley floor of the Chungsong area. The water has been long as a Dalki medicinal water because of its unique therapeutic effect against clacium deficit, stomach and skin troubles, ect. The water has a high $CO_2$ concentration ($P_{CO_2}$=0.51~1.12atm) and exhibits strong pH buffering (5.9~6.26) by $H_2CO_3/HCO_3$ couple. Electrical conductivity ranges from 1,900 to 3100 $\mu$S/cm. Environmental isotopic data $(^{2}H/^{1}H, ^{18}O/^{16}O \;and \;^3H)$ indicates that the water is of meteoric origin recharged in the Cretaceous sedimetary strata distributed in upper part of the catchment area at least before 1950s, The high $P_{co_2}$ and carbon isotope data (${\delta}^{13}C=-3\sim-0.2\textperthousand$) suggest that the potential source of carbonated mineral water was originated in deep-seated $CO_2$ as wel as aboundant carbonate minerals of sedimentary desimetary rocks. The major source minerals of the dissoved species in the carbonated mineral water appear to be carbonate minerals, albite and K-feld-spar in sedimentrary rocks.

  • PDF

Demonstration of rapid single-flux-quantum RS flip-flop using YBCO/Co-YBCO/YBCO ramp-edge Josephson junction with and without ground plane (YBCO/Co-YBCO/YBCO ramp-edge 접합을 이용한 RS flip-flop 회로 제작과 동작)

  • Kim, Jun-Ho;Sung, Geon-Yong;Park, Jong-Hyeok;Kim, Chang-Hun;Jung, Gu-Rak;Hahn, Taek-Sang;Kang, Jun-Hui
    • 한국초전도학회:학술대회논문집
    • /
    • v.10
    • /
    • pp.189-192
    • /
    • 2000
  • We fabricated rapid single-flux-quantum RS flip-flop circuits with and without Y$_1$Ba$_2$Cu$_3$O$_{7-{\delta}}$(YBCO) ground plane. The circuit consists of SNS-type ramp-edge Josephson junctions that have cobalt-doped YBCO and Sr$_2$AITaO$_6$(SAT) for barrier layer and insulator layer, respectively. The fabricated Josephson junction showed a typical RSJ-like current-voltage(I-V) characteristics above 50K. We sucessfuly demonstrated RS flip-flop at temperatures around 50K. The RS flip-flop fabricated on ground plane showed more definite set and reset state in voltage-flux(V-${\phi}$) modulation curve for read SQUID, which may be attributed to a shielding effect of the YBCO ground plane.

  • PDF

SHORT-PERIOD VARIABILITY SURVEY (SPVS) IN BOAO (보현산천문대 단주기변광성 탐사(SPVS)연구)

  • Jeon, Young-Beom;Kim, Seung-Lee;Park, Yoon-Ho;Park, Byeong-Gon;LeeK, Chung-Uk;Lee, Eun-Jeong;Kim, Min-Su;Lee, Kyung-Hoon
    • Publications of The Korean Astronomical Society
    • /
    • v.20 no.1 s.24
    • /
    • pp.21-27
    • /
    • 2005
  • We have been performing a wide-field photometric monitoring program, named SPVS (Short-Period Variability Survey), at the Bohyunsan Optical Astronomy Observatory (BOAO). The observation system consists of a small refracting telescope (D = 155 mm, f = 1050 mm) and a $2k{\times}3k$ CCD Camera. The field of view is $1.0^{\circ}{\times}1.5^{\circ}$. Detection limit is about V = 13 for short-period small amplitude variables such as ${\delta}$ Scuti-type pulsating stars, and about V = 15 for long-period large amplitude variables such as eclipsing binaries and RR Lyrae stars. The instrument is designed to be remote-controlled through internet. The primary purpose of this project is to search for variable objects in bright Galactic open clusters. We present results of test observations conducted towards NGC 7092.

Low k Materials for High Frequency High Integration Modules

  • Na, Yoon-Soo;Lim, Tae-Young;Kim, Jin-Ho;Shin, Hyo-Soon;Hwang, Jong-Hee;Cho, Yong-Soo
    • Journal of the Korean Ceramic Society
    • /
    • v.46 no.4
    • /
    • pp.413-418
    • /
    • 2009
  • Glass systems based on Ca, Sr, Ba, and Zn modified alumino-boro silicates were investigated in order to improve the dielectric and mechanical properties of a typical LTCC (low temperature co-fired ceramic) which was developed for high frequency highly-integrated modules. The glass was prepared by a typical melting procedure and then mixed with cordierite fillers to fabricate glass/ceramic composite-type LTCC materials. The amount of cordierite filler was fixed at 50 volumetric%. For an optimal glass composition of 7.5% CaO, 7.5% BaO, 5% ZnO, 10% $Al_2O_3$, 30% $B_2O_3$, and 40% $SiO_2$ in mole ratio, the resultant LTCC composite showed a dielectric constant of 5.8 and a dielectric loss ($tan{\delta}$) of 0.0009 after firing at $900^{\circ}C$. An average bending strength of 160MPa was obtained for the optimal composition.

Fatigue Strength Evaluation of SPCC Cross-Tension Spot Weld Joints (냉간 압연강판 십자형 점용접부의 피로강도 평가)

  • Kim, Ho-Kyung;Choi, Deok-Ho;Yang, Kyoung-Tak
    • Journal of the Korean Society of Safety
    • /
    • v.21 no.5 s.77
    • /
    • pp.17-21
    • /
    • 2006
  • In this study, SPCC cross-tension type specimens produced under various spot welding conditions were tensile and fatigue tested. Decrease of 2 kA in normal current condition of 10 kA caused a large amount of reduction in both static joining strength and fatigue life. And 2 kA increase resulted in increase of static joining strength and an increase in low cycle regime but a decrease in high cycle regime, revealing the fact that fatigue strength rather than static joining strength would be a major factor during design process in view of the body endurance. As a results of estimating the fatigue lifetimes of various types of spot weld specimens. equivalent stress intensity factor is the proper parameter for predicting the lifetimes of various types of specimens. which can be expressed as ${\Delta}K_{eq}(N/nm^{1.5})=11550N^{-0.36}_{f}$.

Effect of milling on the electrical properties of Ba(Fe1/2Ta1/2)O3 ceramic

  • Mahto, Uttam K.;Roy, Sumit K.;Chaudhuri, S.;Prasad, K.
    • Advances in materials Research
    • /
    • v.5 no.3
    • /
    • pp.181-192
    • /
    • 2016
  • In this work effect of high energy milling on the structural and electrical properties of $Ba(Fe_{1/2}Ta_{1/2})O_3$ (BFT) ceramic synthesized using standard solid-state reaction method were investigated. X-ray diffraction studies indicated that the unit cell structure for all the samples to be hexagonal (space group: P3m1). FTIR spectra also confirmed the formation of BFT without any new phase. The milled (10 h) BFT ceramic showed the formation of small grain sizes (<$2{\mu}m$) which is beneficial for dielectric applications in high density integrated devices. Besides, the milled (10 h) BFT ceramic sample exhibited superior dielectric properties (enhancement in ${\varepsilon}^{\prime}-value$ and reduction in $tg{\delta}-value$) compared to un-milled one. Impedance analysis indicated the negative temperature coefficient of resistance (NTCR) character. The correlated barrier hopping model (jump relaxation type) is found to successfully explain the mechanism of charge transport in present ceramic samples.

Effect of Aging on Physicochemical and Pasting Properties of Nonwaxy Rice Flour and its Starch (쌀의 저장기간에 따른 쌀가루와 생전분의 특성)

  • Kim, Wan-Soo
    • Korean Journal of Human Ecology
    • /
    • v.14 no.6
    • /
    • pp.1037-1046
    • /
    • 2005
  • Using three consecutive years' harvested rices and their starches isolated from rice flours by alkaline method, it was found that no significant aging effect on rice flour and starch was observed based on following results. Proximate data of flours or starches showed in similarity, except high level of crude fat in rice flour and rice starch harvested in 2002. In SEM, the surface of aged rice flour had slightly layered shape due to possible abrasion during storage, and that of aged starch showed more smooth and less rigid polygonal shape. X-ray diffraction patterns of flours and starches were all A type, and crystallinity of rice starch harvested in 2000 had the smallest. From tristimulus colorimetry (Hunterlab Color), total color difference ($\Delta$E) calculated from L, a, and b gave less color difference with the darkest in 2002 harvested one among flours and the lightest in 2001 one among starches. WBCs of both 2002 rice flour and starch were the lowest among samples studied. At 80$^{\circ}C$, swelling power and solubility of rice starches harvested in 2000, 2001 and 2002 were 14.35, 9.75; 14.04, 9.6; and 12.49, 8.82, respectively. The highest peak viscosities measured by RVA were shown both in 2001 rice flour and in its starch. Starch and milled rice flour harvested in 2000 had higher hydrolytic $\alpha$-amylase, compared to other flour and starch samples.

  • PDF

Effects of the Photic Stimulation on Electroencephalogram in Pediatric Epilepsy Patients

  • Yoon, Joong Soo;Choi, Hyun Ju
    • Biomedical Science Letters
    • /
    • v.18 no.4
    • /
    • pp.428-434
    • /
    • 2012
  • Epilepsy is a chronic neurological disease showing a symptom of repeated seizures without any other physical disorders. Among the diagnostic examination for epilepsy, the electroencephalogram (EEG) has been known as an important test. This study aimed to investigate the EEG with photic stimulation in the pediatric epilepsy patients. They underwent digital sleep and waking EEGs or waking EEGs with photic stimulation. Epilepsy type, seizure history, and season of occurring seizure were analyzed. Epilepsy patients showed more response during the period of photic-on and eye close at the frequency of 10~20 Hz during the EEG activation procedure. Photoparoxysmal response (PPR) was shown in 206 patients out of total 1,551 epilepsy patients. PPR was appeared more frequently during summer and winter seasons, and especially in the patients who had a history of seizure. During the PPR, EEG pattern showed spike (77.18%), theta (9.71%), and spike + theta (13.11%). On the other hand, beta and theta waves were not significantly changed by photic stimulation. However, alpha wave was decreased and delta wave was increased by photic stimulation (P<0.05). These changes may be due to temporarily altered electrophysiological function of the epileptic patient's brain by the photic stimulation. There was no difference in the EEG pattern between the left and right side in the brain. In conclusion, condition of photic-on with closed eyes and frequency of 10~20 Hz during the procedure of EEG activation could be appropriate for obtaining a definite photoparoxysmal response in the electroencephalogram of the pediatric epilepsy patients.

A Fault Detection and Location Algorithm Using a Time Constant for DC Railway Systems (시정수를 이용한 직류철도급전계통에서의 고장판단 및 고장점표정 알고리즘)

  • 양언필;강상희;권영진
    • The Transactions of the Korean Institute of Electrical Engineers A
    • /
    • v.52 no.10
    • /
    • pp.563-570
    • /
    • 2003
  • When a fault occurs on railway feeders it is very important to detect the fault to protect trains and facilities. Because a DC railway system has low feeder voltage, The fault current can be smaller than the current of load starting. So it is important to discriminate between the small fault current and the load starting current. The load starting current increases step by step but the fault current increases at one time. So the type of $\Delta$I/ relay(50F) was developed using the different characteristics between the load starting current and the fault current. The load starting current increases step by step so the time constant of each step is much smaller than that of the fault current. First, to detect faults in DC railway systems, an algorithm using the time constant calculated by the method of least squares is presented in this paper. If a fault occurs on DC railway systems it is necessary to find a fault location to repair the faulted system as soon as possible. The second aim of the paper is to calculate the accurate fault location using Kirchhoff's voltage law.