• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.542-548
• /
• 1997

In this study an evaluation method of fatigue strength of membrane type LNG tank is presented with FEM analysis and experimental approach of seam and raised edge welds. The study contains the following : l)FEM analysis of test specimens 2)Fatigue tests of seam and raised edge welds 3)Estimation of cumulative damage factor of the welds on the basis of safe life design concept complying with the rules of classification society 4)Review of the effect of mean stress on the fatigue strength 5)Modelling of fatigue life of the welds which is changeable by weld heights With the results obtained in this study, a model ${\Delta}{\delta}/h^2=0.13553\;{N_{f}}^{-0.3151}$ for seam and raised edge welds having a given weld height is proposed to be useful for designers and inspectors.

• Journal of the Korean Mathematical Society
• /
• v.47 no.2
• /
• pp.425-443
• /
• 2010

We investigate the Schr$\ddot{o}$dinger type operator $H_2\;=\;(-\Delta_{\mathbb{H}^n})^2+V^2$ on the Heisenberg group $\mathbb{H}^n$, where $\Delta_{\mathbb{H}^n}$ is the sublaplacian and the nonnegative potential V belongs to the reverse H$\ddot{o}$lder class $B_q$ for $q\geq\frac{Q}{2}$, where Q is the homogeneous dimension of $\mathbb{H}^n$. We shall establish the estimates of the fundamental solution for the operator $H_2$ and obtain the $L^p$ estimates for the operator $\nabla^4_{\mathbb{H}^n}H^{-1}_2$, where $\nabla_{\mathbb{H}^n}$ is the gradient operator on $\mathbb{H}^n$.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.92-100
• /
• 1992

A Spectroscopic Ellipsorneter(SE) is fabricated. The PSA configuration of the rotating analyzer type where the effects of the imperfect optical elements can be minimized is adopted. The straight through operation shows that the standard deviations of tan$\psi$ and cos$\Delta$ are less than 0.2% in the spectral range of 300nm-850nm. From the film data of ellipsometric spectra the bulk dispersion relation of a few fluorides and the void distribution inside the fluoride thin films are obtained.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.1
• /
• pp.44-51
• /
• 1997

Background : The changes of the composition in the T-lymphocyte are important as an immunological abnormality in the pathogenesis of tuberculosis. Previously, the second type of TCR dimer(${\gamma}{\delta}$ T lymphocyte) that did not express CD4 or CD8 molecules was found. In other reports the presence of this type of lymphocytes was increased in the initial stage of tuberculous infections. Method : To determine whether there are some differences in the T-lymphocyte subsets in the peripheral blood or pleural effusion between pleural tuberculosis and other pleurisy. Thirty patients with pleural effusion among the forty-nine patients were examined T-lymphocyte subset analysis(CD4+T-cell,CD8+ T-cell,${\gamma}{\delta}$ T-lymphocytes) with anti- Leu4, anti-Leu3a, anti-Lea2a, anti HLA-DR and anti-TCR-${\gamma}{\delta}$-1(Becton & Dickinson Co.). Results : The average age of the patients was 50 years old(17-81year). There were 33 males and 16 female patients. Patiensts with tuberculosis are 30cases(tuberculous pleurisy 15), lung cancer 12cases(malignant effusion 9) and pneumonia 7cases(parapneumonic effusion 6cases) In T lymphocyte subsets of pleural effusion, helper T lymphocyte(54.6 + 13.8 %) of tuberculous pleurisy was higher than that(36.2 + 25.3 %) of non-tuberculous pleurisy(p=0.04). The peripheral blood ${\gamma}{\delta}$ T-lymphocytes in tuberculousis was insignificantly higher than non-tuberculous patients(p= 0.24). The peripheral blood ${\gamma}{\delta}$ T-lymphocytes and pleural ${\gamma}{\delta}$ T-Iymphocytes in tuberculous pleurisy was insignificantly higher than in non-tuberculous pleurisy(p= 0.16, p= 0.12). Conclusion : The percentage of -${\gamma}{\delta}$ T lymphocytes among the total T-lymphocytes is not significantly increased in the peripheral blood or pleural effusion of the pleural tuberculosis. ${\gamma}{\delta}$ T lymphocytes is less useful as a diagnostic method of pleural tuberculosis.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.111-118
• /
• 2017

In this paper, combustion tests were performed to investigate performance characteristics of a canted slit-type pintle injector engine which uses kerosene and liquid oxygen as propellants. The number of slits, slit angle and blockage factor were chosen as design variables of the pintle injector. ${\Delta}SR$ was newly defined as the difference of skip ratio caused by both sides of the tip of the canted slit. The experimental results showed that optimal combustion was performed when the blockage factor is about 1 and the difference is less than 0.26.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.67-74
• /
• 2018

Thermoelectric thin film devices of the in-plane configuration consisting of 8 pairs of n-type $Bi_2Te_3$ and p-type $Sb_2Te_3$ legs were processed on Si submounts by electrodeposition. The thermoelectric generation characteristics of the thin film devices were investigated with respect to the apparent temperature difference ${\Delta}T$ caused by LED lighting as well as the change of the leg thickness. When ${\Delta}T$ was 7.4 K, the open circuit voltages of 6.1 mV, 7.4 mV, and 11.8 mV and the maximum output powers of 6.6 nW, 12.8 nW, and 41.9 nW were measured for the devices with the thermoelectric legs of which thickness were $2.5{\mu}m$, $5{\mu}m$, and $10{\mu}m$, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.467-474
• /
• 2010

Stainless steel sheets are widely used as the structural material for railroad cars and commercial vehicles. Structures made of stainless steel sheets are commonly fabricated by gas welding, For the fatigue design of gas welded joints such as fillet joints, it is necessary to obtain design information of the stress distribution at the weldment as well as the fatigue strength of the gas-welded joints. Further, the influence of the geometrical parameters of gas-welded joints on stress distribution and fatigue strength must be evaluated. in this study, ${\Delta}P-N_f$ curves were obtained by fatigue tests. and, the ${\Delta}P-N_f$ curves were rearranged on the basis of the ${\Delta}{\sigma}-N_f$ relation for the hot-spot stresses at the gas-welded joints. These results, were used for conducting an accelerated life test(ALT) From the experiment results, an acceleration model was derived and factors were estimated. The objective is to obtain the information required for the analysis of the fatigue lifetime of fillet welded joints and for data analysis by the statistic reliability method to save time and cost and to develop optimum accelerated life prediction plans.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.235-244
• /
• 2012

A thiazole type accelerator MBT (2-mercapto benzothiazole) was added into silica filled natural rubber (NR) compound with various concentrations (0, 1, 2, 3, 4 phr). The effects of MBT on the cure rate, mechanical property, degree of rubber-filler interaction (${\alpha}_F$), crosslinking density, and viscoelastic property ($tan{\delta}$) were investigated. As accelerator concentration increased, the $t_{s2}$ and $t_{90}$ decreased and the crosslinking density and modulus at 300% elongation increased. The tensile strength and elongation increased up to 3 phr and no further increased at 4 phr. The $tan{\delta}$ value measured at room temperature was higher than that of the $70^{\circ}C$. The ${\alpha}_F$ value was not affected by the addition of MBT. The mechanisms for the vulcanization rate were reviewed.

• Journal of Adhesion and Interface
• /
• v.8 no.4
• /
• pp.14-22
• /
• 2007

In the present study, the effect of milled glass powder and liquid-type nitrile rubber (NBR) on the thermal stability of phenolic resin and the dynamic mechanical properties of glass braid/phenolic composites has been investigated by means of thermogravimetric analysis and dynamical mechanical analysis. It was found that both milled glass power and NBR filled in the waterborne phenolic resin significantly influenced the thermal stability of phenolic resins and the storage modulus and tan delta of the composites. The presence of glass powder increased the thermal stability of the phenolic resin, whereas the presence of NBR resulted in the weight loss in the specific temperature range. The thermal stability of the phenolic resins without and with the fillers was dependent not only on the cure temperature but also on the cure time. The variation of the storage modulus and tan ${\delta}$ of strip-type glass braid/phenolic composites was also influenced with the introduction of glass powder and NBR to the phenolic matrix as well as by the cure conditions given.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.8
• /
• pp.1288-1298
• /
• 2019

Bacterial ATP synthases drive ATP synthesis by a rotary mechanism, and play a vital role in physiology and cell metabolism. Corynebacterium glutamicum is well known as an industrial workhorse for amino acid production, and its ATP synthase operon contains eight structural genes and two adjacent genes, cg1360 and cg1361. So far, the physiological functions of Cg1360 (GenBank CAF19908) and Cg1361 (GenBank CAF19909) remain unclear. Here, we showed that Cg1360 was a hydrophobic protein with four transmembrane helices (TMHs), while no TMH was found in Cg1361. Deletion of cg1360, but not cg1361, led to significantly reduced cell growth using glucose and acetic acid as carbon sources, reduced F1 portions in the membrane, reduced ATP-driven proton-pumping activity and ATPase activity, suggesting that Cg1360 plays an important role in ATP synthase function. The intracellular ATP concentration in the ${\Delta}cg1360$ mutant was decreased to 72% of the wild type, while the NADH and NADPH levels in the ${\Delta}cg1360$ mutant were increased by 29% and 26%, respectively. However, the ${\Delta}cg1361$ mutant exhibited comparable intracellular ATP, NADH and NADPH levels with the wild-type strain. Moreover, the effect of cg1360 deletion on L-valine production was examined in the L-valine-producing V-10 strain. The final production of L-valine in the $V-10-{\Delta}cg1360$ mutant reached $9.2{\pm}0.3g/l$ in shake flasks, which was 14% higher than that of the V-10 strain. Thus, Cg1360 can be used as an effective engineering target by altering energy metabolism for the enhancement of amino acid production in C. glutamicum.