• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.539-544
• /
• 2006

An $H_2$ filter is derived for time delay systems, where there are time delay terms in the state and in the output. A method to compute the $H_2$ norm of time delay systems is proposed. Based on the $H_2$ norm computation method, an $H_2$ filter design is formulated as a nonlinear optimization problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.395-400
• /
• 2004

In most physical processes, the transfer function includes time-delay, and in the general distributed control system using computer network, there exists inherent time-delay caused by the spatial separation between controllers and actuators. This work deals with the synthesis of a discrete-time controller for a nonlinear system and proposes a new effective method to compensate the influence of input time-delay. The controller is synthesized by using input/output linearization. Under the circumstance that input time-delay exists, the system response has more overshoot and tends to diverge. For these reasons, the controller has to produce future input value that will be needed for the system. In order to calculate the future input value, some predictors are adopted. Using the discretization via Euler's method, numerical simulations about the Van der Pol system are performed to evaluate the performance of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.719-727
• /
• 2006

This paper proposes a new method to obtain a maximum allowable delay bound for a scheduling of networked discrete control systems and event-based scheduling method. The proposed method is formulated in terms of linear matrix inequalities and can give a much less conservative delay bound than the existing methods. A network scheduling method is presented based on the delay obtained through the proposed method, and it can adjust the sampling period to allocate same utilization to each control loop. The presented method can handle three types of data (sporadic, emergency data, periodic data and non real-time message) and guarantees real-time transmission of periodic and sporadic emergency data using modified EDF scheduling method.

• 한국환경과학회지
• /
• 제23권4호
• /
• pp.605-613
• /
• 2014

In this work, the delay time for groundwater recharge was estimated by comparing simulated recharges by means of SWAT(Soil and Water Assessment Tool) model and WTF(Water Table Fluctuation) method. The delay time for groundwater recharge means that the time when the water from rainfall travelled through vadose zone just after getting out of soil zone bottom. As measuring this delay time is almost impossible, we used to compare the estimated values from modeling(SWAT) and analytic method(WTF). The test site is Hancheon watershed which has 8 groundwater measurement stations. The results show that the altitude has a linear relationship with the estimated delay time values. To validate these results, we conducted corelation analysis between transformed groundwater levels and observed ones. The results showed that computed groundwater levels have good corelation($R^2$=0.97, 0.87, respectively). The estimated delay time would be used for the groundwater behaviour characteristics in vadose zone. As recharge rates vary according to the height, the delay time is thought to be an import variable for the proper groundwater recharge estimation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1432-1435
• /
• 1996

This paper obtains maximum allowable delay bounds for stability of network-based control systems and presents a network scheduling method which makes the network-induced delay be less than the maximum allowable delay bound. The maximum allowable delay bounds are obtained using the Lyapunov theorem. Using the network scheduling method, the bandwidth of a network can be allocated to each node and the sampling period of each sensor and controller can be determined. The presented method can handle three kinds of data (periodic, real-time asynchronous, and non real-time asynchronous data) and guarantee real-time transmissions of real-time synchronous data and periodic data, and possible transmissions of non real-time asynchronous data. The proposed method is shown to be useful by examples in two types of network protocols such as the token control and the central control.

• 한국시뮬레이션학회논문지
• /
• 제13권2호
• /
• pp.1-12
• /
• 2004

This paper estimated the arrival angle and electric wave delay time using the space method law and the directions of arrival (DOA) estimation algorithm in case of signal correlation. Space method law is the method used to repress cross correlation before applying the weight value to the receiving signal. The values of the diagonal elements in the correlation matrix were averaged to replace as the diagonal elements value. In the area of wireless communication or mobile communication, there are high correlations in case of low delay time difference in multiple waves. This causes the quality of the communication to drop due to interference with the desired signal elements. This paper estimated the arrival angle and electric wave delay time using the space method law and the MUSIC algorithm. With the arrival angle algorithm, the arrival angle cannot be estimated below 5 in case of signal correlations because the angle resolution capacity decreases accordingly. The super resolution capacity was estimated to determine the arrival angle below 5 in this paper. In addition, the proposed algorithm estimated the short delay time difference to be below 20ns.

• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.119-121
• /
• 2005

This paper aims to estimate the delay time of multiple signals in a multi-path environment. It also seeks to carry out a comparative analysis with the existing delay time under the proposed algorithm to develop a new algorithm that applies the space average method in a MUSIC algorithm. Unlike the existing delay time estimation algorithm, the developed algorithm was able to estimate the delay time in 5ns low. Therefore, the algorithm proposed in this paper improved the existing delay time estimated algorithm.

• Structural Engineering and Mechanics
• /
• 제20권2호
• /
• pp.191-207
• /
• 2005

Time delay exists inevitably in active control, which may not only degrade the system performance but also render instability to the dynamic system. In this paper, a novel active controller is developed to solve the time delay problem in flexible structures. By using the independent modal space control method, the differential equation of the controlled mode with time delay is obtained from the time-delay system dynamics. Then it is discretized and changed into a first-order difference equation without any explicit time delay by augmenting the state variables. The modal controller is derived based on the augmented system using the discrete variable structure control method. The switching surface is determined by minimizing a discrete quadratic performance index. The modal coordinate is extracted from sensor measurements and the actuator control force is converted from the modal one. Since the time delay is explicitly included throughout the entire controller design without any approximation, the system performance and stability are guaranteed. Numerical simulations show that the proposed controller is feasible and effective in active vibration control of dynamic systems with time delay. If the time delay is not explicitly included in the controller design, instability may occur.

• 융복합기술연구소 논문집
• /
• 제5권2호
• /
• pp.37-42
• /
• 2015

This paper presents the effects of the computational time-varying delay on the stability of the haptic system that includes a virtual wall and a first-order-hold method. The model of a haptic system includes a haptic device model with a mass and a damper, a virtual wall model, a first-order-hold model and a computational time-varying delay model. In this paper, the maximum of the computational time-varying delay is assumed to be as much as the sampling time. Using the simulation, it is analyzed how the sample-hold methods and the computational time-varying delay affect the maximum available stiffness. As the maximum of computational time-varying delay increases, the maximal available stiffness of a virtual wall model is reduced.

• 화약ㆍ발파
• /
• 제41권4호
• /
• pp.41-50
• /
• 2023

본 연구에서는 굴착 물량 증대와 발파공해 저감을 위해서 전자뇌관을 이용한 수직방향 더블 데크 공법을 적용하였다. 더블 데크 공법은 상부 데크 발파 후 자유면이 완전히 형성되지 않은 상태에서 하부 데크 발파가 진행되면 발파 효율이 감소할 가능성이 있다. 이와 같은 이유로 더블 데크 공법은 데크 단차에 따라서 발파 효율이 달라진다. 따라서 본 연구에서는 홀 단차의 1~5배를 적용한 4가지 데크 단차를 제안하였고, 발파 후 파쇄도 분석을 통해 발파 효율을 평가하였다. 파쇄도 평가 결과 패턴 4(데크 단차=홀 단차×5)의 파쇄도가 가장 좋았으며, 패턴 3(데크 단차=홀 단차×3) 이상에서 파쇄효율이 큰 폭으로 증가하는 것을 확인할 수 있었다. 이에 따라 수직방향 더블 데크 발파 시 데크 단차는 최소 홀 단차의 3배 이상이 되어야 효율적인 발파 효과를 얻을 수 있다고 분석되었다.