• 비파괴검사학회지
• /
• 제31권1호
• /
• pp.53-61
• /
• 2011

본 연구는 편측 노치가 삽입된 A16061-T6 알루미늄 합금 평판 시편에 대해 유리섬유강화플라스틱(GFRP) 복합재 패치의 적층수를 변수로 하여 보수히고, 인장 하중에 따른 시편의 손상 과정을 음향방출법(acoustic emission, AE)으로 실시간 분석하였다. AE 에너지 발생률(AE energy rate), hit 발생률(hit rate), AE 진폭(AE amplitude) 거통과 파형 및 1차 중심주파수(1st peak frequency)의 대역을 조사하여, 시편 파괴시 알루미늄 크랙(Al cracking), 섬유 파단(fiber breakage), 수지 균열(resin cracking), 층간 분리(delamination)로 분류하였다. 시편의 변위를 음향방출 특성에 따라 구간(region) I, II, III으로 나눌 수 있었으며, 패치 자체가 실제 파괴되는 구간인 구간 II를 세부적으로 분석하여 패치의 적층수에 따른 AE 특성 차이를 구하였다.

• Structural Monitoring and Maintenance
• /
• 제3권3호
• /
• pp.277-296
• /
• 2016

There is a need for rapid and objective assessment of concrete bridge decks for maintenance decision making. Infrared Thermography (IRT) has great potential to identify deck delaminations more objectively than routine visual inspections or chain drag tests. In addition, it is possible to collect reliable data rapidly with appropriate IRT cameras attached to vehicles and the data are analyzed effectively. This research compares three infrared cameras with different specifications at different times and speeds for data collection, and explores several factors affecting the utilization of IRT in regards to subsurface damage detection in concrete structures, specifically when the IRT is utilized for high-speed bridge deck inspection at normal driving speeds. These results show that IRT can detect up to 2.54 cm delamination from the concrete surface at any time period. It is observed that nighttime would be the most suitable time frame with less false detections and interferences from the sunlight and less adverse effect due to direct sunlight, making more "noise" for the IRT results. This study also revealed two important factors of camera specifications for high-speed inspection by IRT as shorter integration time and higher pixel resolution.

• 비파괴검사학회지
• /
• 제25권2호
• /
• pp.81-86
• /
• 2005

본 논문에서는 반도체 패키지 내부결함의 비파괴 정량평가를 위한 ESPI 기법을 이용한 시스템 및 검사기 법을 제안하고 있으며, 검사시스템은 ESPI 검사장치, 열변형유도장치, 단열챔버로 구성되어있다. 기존 초음파, X-ray 기반의 검사기법에 비하여 측정시간 및 검사방법이 용이하며, 결함의 정량검출이 가능하다는 장점이 있다. 검사결과에서 대부분의 결함이 열 방출이 많은 칩 주위에서 박리결함으로 나타났으며, 원인은 층간 접착강도의 약화와 열분배 설계에서 문제점인 것으로 사료된다.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.299-306
• /
• 2001

본 논문에서는 ESPI 시스템을 이용하여 복합재료 구조물의 인위, 자연 결함을 검출하였다. 복합재료 구조물에서의 ESPI의 적용성을 알아보기 위해 복합재료 적층판 시험편, 하니컴 구조물 시험편, 접착조인트 시험편을 사용하였다. 결함을 검출하기 위해 시편의 표변변형을 쉽게 발생시킬 수 있는 열하중법을 선택하였다. 실험결과는 ESPI를 이용하여 복합재료 구조물의 결함을 쉽게 검출말 수 있고, 다른 여러 복합재료 구조물의 결함의 걸출에도 적용할 수 있을 확인하였다.

• 비파괴검사학회지
• /
• 제24권3호
• /
• pp.246-252
• /
• 2004

복합재료는 이방성의 특징으로 매우 복잡한 역학거동을 하며, 해석 및 신뢰성 검사에 많은 어려움이 있다. 특히, 기존의 비파괴검사기법으로 내부손상을 검출하는 것은 매우 어려운 실정이다. 이에 본 연구에서는 복합재구조물의 가장 취약한 분야인 충격에 의한 손상이 발생할 경우 효과적인 검출기법을 개발하고, 충격에 따른 내부결함의 정량평가에 ESPI를 활용하였다. 인공결함을 이용하여 ESPI기법의 신뢰성을 확보하고 실제 충격손상 시험편에 대해 적용하여 5%이내의 오차율로 결함을 정량평가하였다.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.99-103
• /
• 2005

It is generally accepted that fracture toughness of fiber-reinforced polymer composites is affected by strain rate in an atmospheric pressure condition. For a present study, the strain rate effect on the fracture toughness of fiber-reinforced laminated composites in the hydrostatic pressure condition was investigated. For this purpose, fracture tests have been conducted using graphite/epoxy laminated composites applying three steps of the strain rate at 270 MPa hydrostatic pressure condition. The strain rates applied were $0.05\%/sec,\;0.25\%/sec$, and $0.55\%/sec$. Fracture toughness was determined from the work factor approach as a function of applied strain rate. The result showed that fracture toughness decreased as the strain rate increased. Specifically, the fracture toughness decreased $12\%$ as the strain rate increased from $0.05\%/sec$ to $0.55\%/sec$.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.183-190
• /
• 2003

Major device failures such as die cracking, interfacial delamination and warpage in flip chip packages are due to excessive heat and thermal gradients- There have been significant researches toward understanding the thermal performance of electronic packages, but the majority of these studies do not take into account the combined effects of thermo-mechanical interactions of the different package constituents. This paper investigates the thermo-mechanical performance of flip chip package constituents based on the finite element method with thermo-mechanically coupled elements. Delaminations with different lengths between the silicon die and underfill resin interfaces were introduced to simulate the defects induced during the assembly processes. The temperature gradient fields and the corresponding stress distributions were analyzed and the results were compared with isothermal case. Parametric studies have been conducted with varying thermal conductivities of the package components, substrate board configurations. Compared with the uniform temperature distribution model, the model considering the temperature gradients provided more accurate stress profiles in the solder interconnections and underfill fillet. The packages with prescribed delaminations resulted in significant changes in stress in the solder. From the parametric study, the coefficients of thermal expansion and the package configurations played significant roles in determining the stress level over the entire package, although they showed little influence on stresses profile within the individual components. These observations have been implemented to the multi-board layer chip scale packages (CSP), and its results are discussed.

• 한국세라믹학회지
• /
• 제44권4호
• /
• pp.214-218
• /
• 2007

The decrease of polarization resistance in cathode is the key point for operating at intermediate temperature SOFC (solid oxide fuel cell). In this study, the influence of Co substitution in B-site at complex perovskite on the electronic conductivity of PSCM ($Pr_{0.3}Sr_{0.7}Co_xMn_{(1-x)}$) was investigated. The PSCM series exhibits excellent MIEC (mixed ionic electronic conductor) properties. The ASR (area specific resistance) of PSCM3773 was $0.174{\Omega}{\cdot}cm^2\;at\;700^{\circ}C$. The activation energy of PSCM3773 was also lower than other compositions of PSCM. The TEC(thermal expansion coefficient) was decreased by addition of Mn. The ASR values were increased gradually during the thermal cycling test of PSCM37773 due to the delamination between electrolyte and cathode materials. The delamination was caused by the difference of TEC.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.23-29
• /
• 2009

The hybrid composite materials are recently used in many field as an advanced material due to their high resistance to fracture. However, hybrid composite materials have several problems, especially delamination, compared with homogeneous materials such as an aluminum alloy, etc. In this study, we carried out the tensile test to study the tension failure appearances and tensile ultimate strength of CFRP/Al/CFRP hybrid composite materials. The CFRP material used in the experiment is a commercial material known as CU175NS in unidirectional carbon prepreg. Also Al/CFRP/Al hybrid composites with three kind length of a single edge crack were investigated for the relationship between an aluminium volume fraction and a crack length. The crack length was measured by a traveling microscope under a universal dynamic tester. Futhermore the stress intensity factor behavior was examined according to a volume fraction and an initial crack length ratio to a width.

• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.371-382
• /
• 2017

Concrete filled steel tubes are extensively applied in engineering structures due to their resistance to high tensile and compressive load and convenience in construction. But one major flaw, their vulnerability to environmental attack, can severely reduce the strength and life of these structures. Degradation due to corrosion of steel confining the concrete is one of the major durability problems faced by civil engineers to maintain these structures. The problem accelerates as inner surface of steel tube is in contact with concrete which serves as electrolyte. If it remains unnoticed, it further accelerates and can be catastrophic. This paper discusses a non-destructive degradation monitoring technique for early detection corrosion in steel tubes in CFST members. Due to corrosion, damage in the form of debonding and pitting occurs in steel sections. Guided ultrasonic waves have been used as a feasible and attractive solution for the detection and monitoring of corrosion damages in CFST sections. Guided waves have been utilized to monitor the effect of notch and debond defects in concrete filled steel tubes simulating pitting and delamination of steel tubes from surrounding concrete caused by corrosion. Pulse transmission has been used to monitor the healthy and simulated damaged specimens. A methodology is developed and successfully applied for the monitoring of concrete filled steel tubular sections undergoing accelerated chloride corrosion. The ultrasonic signals efficiently narrate the state of steel tube undergoing corrosion.