Acknowledgement
Supported by : 한국연구재단
References
- C. L. Ong, R. C. Chu, T. C. Ko and S. B. Shen, "Composite patch reinforcement of cracked aircraft upper longeron : analysis and specimen simulation," Theoretical and Applied Fracture Mechanics, Vol. 14, No. 1, pp. 13-26 (1990) https://doi.org/10.1016/0167-8442(90)90040-7
- S. Naboulsi and S. Mall, "Characterization of fatigue crack growth in aluminum panels with a bonded composite patch," Composite Structure, Vol. 37, No. 3-4, pp. 321-334 (1997) https://doi.org/10.1016/S0263-8223(98)80003-2
- Hossein Hosseini Toudeshky, Bijan Mohammadi and Hamid Reza Daghyani, "Mixed-mode fracture analysis of aluminum repaired panels using composite patches," Composites Science and Technology, Vol. 66, No. 2, pp. 188-198 (2006) https://doi.org/10.1016/j.compscitech.2005.04.028
- Jean Denis Mathias, Xavier Balandraud and Michel Grediac, "Applying a genetic algorithm to the optimization of composite patches," Computers and Structures, Vol. 84, No. 12, pp. 823-834 (2006) https://doi.org/10.1016/j.compstruc.2005.12.004
- D. Quinas, B. Bachir Bouiadjar, B. Achour and N. Benderdouche, "Modelling of a cracked aluminum plate repaired with composite octagonal patch in mode I and mixed mode," Material and Design, Vol. 30, No. 3, pp. 590-595 (2009) https://doi.org/10.1016/j.matdes.2008.05.040
- C. T. Sun, J. Klug and C. Arendt, "Analysis of cracked aluminum plates repaired with bonded composite patch," AIAA Journal, Vol. 34, No. 2, pp. 369-375 (1996) https://doi.org/10.2514/3.13073
- Turaga V. R. S. Umamaheswar and Ripudaman Singh, "Modelling of a patch reapir to a thin cracked sheet," Engineering Fracture Mechanics, Vol. 62, No. 203, pp. 267-289 (1999) https://doi.org/10.1016/S0013-7944(98)00088-5
- F. Findik and H. Unal, "Development of thermal residual strain in a single sided composite patch," Composite Part B: Engineering, Vol. 32, No. 4, pp. 379-383 (2001) https://doi.org/10.1016/S1359-8368(01)00018-X
- P. Colimbi, A. Bassetti and A. Nussbauber, "Delamination effects on cracked steel members reinforced by prestressed composite patch," Theoretical and Applied Fracture Mechanics, Vol. 39, No. 1, pp. 61-71 (2003) https://doi.org/10.1016/S0167-8442(02)00138-6
- 김위대, "복합재 패치를 이용한 노후 항공기의 중앙균열 보수에 관한 연구", 한국항공우주학회지, Vol. 27, No. 8, pp. 71-78 (1999)
- 정기현, 양원호, 김철, "경사균열을 갖는 복합재료 보강판의 피로균열 성장에 관한 연구", 대한기계학회지 A권, Vol. 25, No. 12, pp. 2091-2099 (2001)
- 김만태, 이경엽, "탄소섬유/에폭시 복합재로 보수된 알루미늄의 피로특성에 대한 연구: 알루미늄 표면처리 효과", 한국정밀공학회지, Vol. 21, No. 11, pp. 149-154 (2004)
- A. Chukwujekwu Okafor, Navdeep Singh and Navrag Sinph, "Acoustic emission detection and prediction of fatigue crack propagation in composite patch repairs using neural networks", American Institute of Physics, pp. 1532-1539 (2007)
- 권오양, 김성진, 장용준, "복합재 패치로 보수된 알루미늄 패널의 피로균열 성장거동과 AE신호의 유형인식", 비파괴검사학회지, Vol. 27, No. 1, pp. 48-57 (2007)