• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.99-103
• /
• 1979

For the purpose of investigating the response of the periodontal tissue in relation to the experimental tooth movement, the rats were inhibited from collagen formation by adminstration of aminoacetonitrile. Findings were as follows: 1) In experimental group, the principal fibers of the periodontal ligament came to run parallel along the alveolar bone or root surface on the pressure side, while the decrease in density, irregular arrangement, and partial loss of principal fibers were observed on the tension side. 2) Sharpey's fibers at the alveolar bone decreased in number, and as the aminoacetonitrile administration continued, the capability of matrix formation decreased on the tension side, the narrowing of the alveolar septum and poor-bony trabeculation appeared on the pressure side. 3) In cementum, Sharpey's fibers were distributed irregularly. The formation of acellura cementum was decreased on the tension side, while the formative capability of cellular cementum was increased. 4) The degree of staining by Herovici technique decreased in the periodontal membrane. By PAS and ninhydrine -Schiff reaction it was appeared weakly positive in the region where the Sharpey's fibers existed.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.160-168
• /
• 2006

The conductances of trimethyltetradecylammonium bromide (TTAB) plus triphenyltetradecyl phosphonium bromide (TTPB) and TTAB plus trimethylhexadecylammonium bromide (HTAB) over the entire mole fraction range of TTAB were measured in water and in cyclodextrin plus water mixtures at fixed 4 and 8 mM of cyclodextrin at $30^{\circ}C$. The conductivity plot for both binary mixtures shows a single break from which the mixed critical micelle concentration and degree of micelle ionization were computed. From the slope of the conductivity curve, the equivalent ionic conductivities of the monomeric, associated, and the micelle states were calculated and discussed with respect to the surfactant-cyclodextrin complexation in the whole mole fraction range of both surfactant binary mixtures. The association constant K between the respective monomeric surfactant and cyclodextrin cavity of fixed 4 mM cyclodextrin was computed by considering 1:1 association from the surface tension measurement. A comparison among the K values for HTAB-cyclodetrin, TTAB-cyclodextrin, and TTPB-cyclodextrin shows that the former complexation is significantly stronger in comparison to the other ones due to the longer hydrophobic tail.

• Fibers and Polymers
• /
• 제4권1호
• /
• pp.32-37
• /
• 2003

The nonionic surfactant properties of ethoxylated azo dyes, such ai cloud point and surface tension have been investigated. The synthesized ethoxylated azo dyes could dye polyester fabric without any special pre-treatment. When the average number of ethylene oxide (EO) in the ethoxylated azo dye reached 6, its fixation could exceed $90^{\circ}C$ from the thermosol dyeing process. The average degree of condensation of ethylene glycol in the chain was interrelated with the dyeing results and did not affect on the maximum absorption wavelength (λmax) of the polyoxyethylene dye. When the average length of polyoxyethylene chain decreased, the molecular weight of dyes became smaller and the fixation of dyes was improved.

• 환경위생공학
• /
• 제11권3호
• /
• pp.69-77
• /
• 1996

The result of isolated and selected to the strain having the emulsifying activity from soil's strain the strain was identified as Candida genus. The strain was investigated with culture condition at pH culture temperature, flow rate of air, strring rate etc., and physicochemical properties of the biosurfactant were examined. The optimum composition of medium for a strain cultivation were obtained as follow : glucose ; 100g/L, yeast extract ; 10g/L, urea ; 1.0g/L, KH$_{2}$PO$_{4}$ ; 50mg/L, MgSO$_{4}$ ; 500mg/L, and the op condition of cultivation was as follow : pH ; 3.0, temperatlue ; 24$\circ $C, strring rate ; 40rpm. The maximum yield of biosurfactant was obtained by pH ; 3.0-3.5, and temperature ; 25$\circ $C. The degree of emulsification of syntesized biosurfactant was increased clearly by increasing concentration of biosurfactant and it's stability was maintained for a long time. The surface tension of biosurfactant was varied with pH, especially it was showed that the surface tension was high at acidic pH.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.395-406
• /
• 2004

The spectral element model is known to provide very accurate structural dynamic characteristics, while reducing the number of degree-of-freedom to resolve the computational and cost problems. Thus, the spectral element model for an axially moving Bernoulli-Euler beam subjected to axial tension is developed in the present paper. The high accuracy of the spectral element model is then verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension on the vibration characteristics, wave characteristics, and the static and dynamic stabilities of a moving beam are investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.487-490
• /
• 2004

In this paper, we investigated the characteristics of initiation and propagation behavior for fatigue crack observed by changing various shapes of initial crack and magnitudes of loading in modified compact tension shear(CTS) specimen subjected to shear loading. In the low-loading condition, the secondary fatigue crack was created in the notch root due to friction on the pre-crack face grew to a main crack. In the high-loading condition, fatigue crack under shear loading propagated branching from the pre-crack tip. Influenced by the shear loading condition, fatigue crack propagation retardation appeared in the initial propagation region due to the reduction of crack driving force and friction on crack face. In both cases, however, fatigue cracks grew in tensile mode type. The propagation path of fatigue crack under the Mode II loading was 70 degree angle from the initial crack regardless of its shape and load magnitude.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.176-184
• /
• 1999

Dynamic characteristics of pantograph-catenary system that supplies electrical power to high-speed trains are investigated. A simple catenary is composed of the contact and messenger wires connected by hamgers possessing bi-directional stiffness properties. The influences of parameters that determine the contact properties of pantograph-catenary system are investigated through numerical simulations. For the catenary, a finite difference model composed of 10 spans is constructed. The contact and messenger wires are modeled as strings with respective tension and damping ratio values. The pantograph is modeled as a linear 3-degree-of-freedom system. It is found that the tension, number of hangers and damping ratios as well as the speed of the train significantly influence the contact forces and contact separation rate

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.302-307
• /
• 2004

This paper reviewed characteristics of fatigue crack behavior observed by changing various shapes of initial crack and magnitudes of loading in compact tension shear(CTS) specimen subjected to shear loading. In the high-loading condition, fatigue crack under shear loading propagated branching from the pre-crack tip. Meanwhile, the secondary fatigue crack in the low-loading condition which was created in the notch root due to friction on the pre-crack face grew to a main crack. Influenced by the mode II loading condition, fatigue crack propagation retardation appeared in the initial propagation region due to the reduction of crack driving force and friction on crack face. In both cases, however, fatigue cracks grew in tensile mode type. Propagation path of fatigue crack under the shear loading was 70 degree angle from the initial crack regardless of its shape and load magnitude.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.831-834
• /
• 2008

The spectral element model is known to provide very accurate structural dynamic characteristics, while reducing the number of degree-of-freedom to resolve the computational and cost problems. Thus, the spectral element model with variational method for an axially moving Bernoulli-Euler beam subjected to axial tension is developed in the present paper. The high accuracy of the spectral element model is the verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension the vibration characteristics, wave characteristics, and the static and dynamic stabilities of a moving beam are investigated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1092-1096
• /
• 2009

스펙트럴요소법 (SEM)은 계산되는 행렬의 크기를 줄여 비용과 시간을 절감하면서 구조물의 동역학적 특성을 정확하게 알 수 있는 해석법이다. 본 연구에서는 변분법을 이용하여 양단에서 축 방향으로 장력을 받으며 같은 방향으로 이동하는 현을 스펙트럴요소법 (SEM) 을 이용하여 해석하였다. 또 결과의 정확도를 비교하기 위하여 스펙트럴요소법 (SEM)과 유한요소법 (FEM)과 엄밀해를 비교하였다. 그리고 현이 움직이는 속도와 양단에 작용하는 장력이 진동특성, 파동특성 그리고 정, 동적 안정성에 어떤 영향을 미치는지 연구하였다.