• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.1-14
• /
• 2005

Statement of problem. Among the physical properties of adhesion luting cement, the aspect that requires the most important factor is the degree of solubility and water sorption. Dissolution or an inadequate due to excessive water sorption inside the oral cavity compromises the while concurrently increasing the susceptibility to secondary dental caries. Susceptibility to dissolution and difficulty of removing remnant cement from the gingival sulcus have hindered the use of dental resin cement in the clinical practice, but the improved characteristics of newer generation resin cements have interest in and enabled resin cements to be widely used in adhesion of fixed prosthesis, such as laminate veneers and all-ceramic crowns. Purpose. The purpose of this study is to compare and analyze the degrees of solubility and water sorption of a variety of resin cements widely used for clinical purposes with different curing methods. Material and methods. Self-curing resin cements, $Avanto^{(R)}$, $C&B^{TM}$ CEMENT and Superbond C&B cements comprised group 1, 2 and 3. The dual-curing resin cements $Panavian^{TM}$ F, $Calibra^{(R)}$ and $Variolink^{(R)}$ II were divided into groups 4, 5, and 6, respectively. The investigation was carried out using disc-shaped specimens as specified by ANSI/ADA Specification No. 27. The degree of water sorption, water solubility and lactic acid solubility of each test group was analyzed statistically leading to the following conclusion. Results. The degree of water sorption was shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. There were significant differences between the water sorption of each group. Results of the degree of water solubility were shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. Statistically significant differences were found between each group, with the exception of groups 1 and 3. Finally, the degree of lactic acid solubility was found to increase in the following order : group 6,5,4,2,3 and 1. Significant differences were found between each group. In general dual-curing resin cements displayed substantially lower values than self-curing resin cements with regard to water sorption, water solubility, and lactic acid solubility. Conclusions. From the results of this study, dual-curing resin cements show a significantly lower degree of water sorption and solubility than their self-curing counterparts. Clinically, when selecting resin cements, the product with a lower degree of water sorption and solubility are preferred. The results of this study indicate that the use-of dual-curing resin cements is preferable to self-curing cements.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.302-305
• /
• 2002

Scoria is a bomb-sized, generally vesicular pyroclast that is red or black in color and light in weight. In this study, scoria from Cheju was examined for the use as a sorbent. It is composed of plagioclase, olivine, hornblende, pyroxene, and glass, with an average composition of 49.84% SiO$_2$, 14.07% A1$_2$O$_3$, End 9.14% Fe$_2$O$_3$. Studies on kinetic isotherm sorption of Zn(II) onto scoria under various parameters such as initial zinc concentration, particle size, and adsorbent/adsorbate ratio were carried out using an agitated batch. The results suggest that the smaller scoria size and the larger adsorbent/adsorbate ratio produce the higher degree of Zn(II) removal. More effective removal also appears at lower initial Zn concentration. The sorption behavior of Zn(II) onto scoria seems to be mainly controlled by cation exchange. Studies on equilibrium isotherm sorption of other heavy metals (Pb, Cu, Cd) onto scoria were also conducted and compared with those onto powdered activated carbon (PAC) and non-organic matter scoria (NOS), The results suggest that the Cheju scoria has the slightly higher sorption capability than PAC and NOS, and the order of the effective sorption onto scoria and PAC is Pb > Cu > Zn > Cd. The monometal sorption onto scoria is more stronger than the competitive sorption.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1093-1097
• /
• 2020

A composite iodine sorbent was obtained in the form of porous polymer matrix with activated carbon particles impregnated with triethylenediamine deposited on its surface. A comparative assessment of the radioactive methyliodide capturing efficiency by the composite sorbent and a sample of industrial charcoal sorbent was conducted. It was shown that under the selected testing conditions, the hydraulic resistance of the composite sorbent is lower, and the sorption capacity is higher than that of the industrial charcoal sorbent. A method for comparing the effectiveness of iodine sorbents, based on the calculation of the ratio of the sorption capacity index to the minimum capacity index, needed for the required purification degree was proposed.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.227-235
• /
• 1996

poly(acrylic acid)(PAA)-poly(vinyl alcohol)(PVA) membranes have been prepared by crosslinking reaction between the carboxylic acid groups of PAA and the hydroxylic groups of PVA. In the measurements of the swelling and preferential sorption of the membranes, sorption behaviors of the membranes in pure water, pure acetic acid and a mixture of them have been investigated, respectively. From the measurements of the preferential sorption in 90wt% acetic acid of aqueous mixture, the sorption of water component was found to be more enhanced at high PAA content in the membrane than that of acetic acid component due to the interaction of water with acetic acid. The sorption behavior and the degree of crosslinking influenced competitively the permeation behavior of permeants. Permeation behavior of perrecants through the membranes was analyzed by using permeation activation energies which had been obtained from the Arrhenius plots of fluxes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.113-120
• /
• 1994

The Purpose of this study was to improve the moisture related properties of viscose rayon fibers. Viscose rayon filament yarns were partially etherified to make CMC fibers. CMC fibers were converted to the sodium, calcium, and ferric salt forms by an ion exchange method. The property changes of ion exchanged CMC fibers were examined. Cation contents of fibers were varied depending on the degree of substitution of CMC fibers. The strength of Na, Ca, Fe-CMC was higher than H-CMC owing to the plasticization by moisture sorption and the crosslinking by cations. The moisture regain was increased by carboxymethylation and that of Fe-CMC showed the highest value. The degree of swelling determined by the water retention value was observed to be Na-CMC > Ca-CMC > H-CMC > Fe-CMC. The solution retention value was decreased in the order . Ca-CMC > Na-CMC > H-CMC > Fe-CMC.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.398-402
• /
• 1989

Moisture sorption and cooking properties of two varieties of Korean soybean(Jangyup and Whangkeum) were studied. When soybean was stored under the various relative humidities (RH) of 33-86% at 16'E for 125hours, its sorption behaviors were divided into two : desorption at the RHs of 33 and 44% and adsorption at the RHs of above 55%. The sorption rate was decreased rapidly during storage. In comparisons with only storage humidities, the sample stored at higher RH held the higher sorption rate. The relationships between storage time and sorption rate were applied well to the equation, log dw/dt= b log t+ log a, where w is the moisture content(%, db), t is time(hour) and a and b are the parameters which were calculated from the experimental data. The calculated moisture contents from the equation agreed well with the measured moisture contents. On the other hand, the cooking degrees of soybean which was steamed in an autoclave at $106-121^{\circ}C$ were compared by the maximum cutting forces. The cooking time to attain the same degree of cooking decreased logarithmically as the cooking temperature increased. The z-values which were calculated from the time-temperature combinations that gave the same degree of cooking for Jangyup and Whangkeum were $13.3^{\circ}C$ and $12.8^{\circ}C$ respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.116-123
• /
• 1991

Two solution to soil ratios, 2 : 1 and 5 : 1 were tested to determine the appropriate ratio in the sorption measurement off. sulfoxide for Wahiawa soil samples, 0-20 cm, 40-60 cm and 100-120 cm. and Salinas soil samples, 0-15cm and 115-130cm. One ${\mu}$ mol/L f.sulfoxide was used as an initial equilibration concentration. Sorption of f.sulfoxide at 5 : 1 ratio showed appropriate mixing, while sorption at 2 : 1 ratio indicated insufficient mixing during the various batch equilibration times (4, 12, 24 and 48 hours). For most samples the degree of sorption was about 20-50%, which falls in the desired range (20-80%) at the 5 : 1 ratio. An exception was with the low-sorptive Wahiawa subsoil in which the ranges were below 20%. Thus the 5 : 1 ratio can be used for f.sulfoxide sorption measurement. Four equilibration times (4, 12, 24 and 48 hours) and four concentrations(0.1, 1.0, 5.0 and $10{\mu}mol/L$) were used to determine the appropriate equilibration time for Wahiawa and Salinas soils. Sorption increased over all equilibration times, indicating no complete equilibrium within 48 hours. Apparent equilibrium was reached in 4 hours, and sorption increased slowly until 24 hours and faster thereafter, except for the Wahiawa soil, 100-120 cm. The recommended equilibration time is 24 hours, since it may eliminate the insufficient sorption and yet avoid undesirable transformation.

• Korean Journal of Food Science and Technology
• /
• v.18 no.3
• /
• pp.234-240
• /
• 1986

Soybean hydrolysate (SHT) was prepared from defatted soybean by hydrolysing with papain and ${\alpha}-amylase$ and water sorption isotherms were determined as a function of proteolysis degree. The moisture content and B.E.T. value of SHT at a certain water activity $(A_w=0.80)$ increased lineraly with increasing degree of proteolysis. However, they changed drastically above 70% proteolysis. The water holding capacity of 78% SHT was similar to that of sorbito. The results indicate the increase of water sorption capacity is due to the release of polar groups through hydrolysis. Mizrahi equation generally gave the best fit for isotherms of SHT. Storage stability of intermediate moisture foods containing $5{\sim}10%$ SHT increased considerably, although some favorable characteristics decreased.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.969-973
• /
• 1999

In this work, we studied the degree of hydrolysis of ion exchanger in $NH_4OH$ solution and sorption characteristics of $NH_3$ by potentiometric titration curves with using carboxylic acid ion exchanger Fiban K-4. We knew that the theoretical pH values agreed with the experimental pH values on the $NH_4OH$ concentrations in various concentrations of supporting electrolyte $(NH_4)_2SO_4$. The sorption values of $NH_3$ using the ion exchanger can be calculated from equivalent sorption curves for various pH. Also, the degree of hydrolysis increased with decreasing concentration of supporting electrolyte and pH. In order to obtain the mono ion form below 0.01 M as the decreasing concentration of supporting electrolyte, the pH values should be increased. From these results, therefore, the concentrations of supporting electrolyte and pH values were determined.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.30-36
• /
• 2013

Hydrophobic property of Kapok fiber was investigated by sequential removal of its components by different extraction methods. Acetone extraction for the removal of the hydrophobic extractives, holo-cel-lulose preparation after the removal of lignin and xylan extraction by potassium hydroxide was applied. The degree of hydrophobicity of each samples were measured by the water sorption ability. The water sorption ability of Kapok fiber was increased by the sequential treatment of acetone extraction, holocellulose preparation and xylan removal. Based on holocellulose compositional analysis by $^1H$-NMR spectroscopic method, the unusual high amount of the acetyl groups in the holocellulose of Kapok partially contributed to the hydrophobicity of Kapok holocellulose fiber.