• 펄프종이기술
• /
• 제40권5호
• /
• pp.1-10
• /
• 2008

Synthetic mineral microparticles (SMM) is a patented system which has been developed to promote drainage of water and retention of fine particles during papermaking. It is shown in patents that the SMM system can have advantages in both of drainage and retention, compared with montmorillonite (bentonite), which is one of the most popular materials presently used in this kind of application. Turbidity and gravity drainage time were measured using a Britt-Jar test with representative SMM formulations, in order to confirm the efficacy of SMM covering a wide range of compositions and discover effects of some key variables that have the potential to lead to unexpected advantages in terms of the effectiveness of the microparticles, when used in combination with a cationic polyacrylamide treatment of papermaking furnish. An iron silicate showed highest retention performance, as well as suitably fast drainage time relative to other metal silicate and bentonite. Zinc silicate improved retention and drainage. SMM synthesized from aluminum sulfate ($Al_2(SO_4){_3}$) did not show a benefit in retention and drainage, relative to bentonite. SMM synthesized from aluminum chloride ($AlCl_3$) performed better in drainage and retention than bentonite when the Al/Si ratios were 0.76 and 1.00. It was found that when the Al/Si ratio and neutralization are considered, pH variation due to the change of Al/Si ratio can be a key factor to control the size of primary metal silicate particles and the degree of coagulation of the primary particles.

• 대한치과의료관리학회지
• /
• 제11권1호
• /
• pp.38-46
• /
• 2023

Composite resins, commonly used in clinical practice, have been developed to improve aesthetics to obtain smooth surfaces. Although the restored composite resin has a smooth surface, it gradually becomes rough over time. Therefore, this study measured glossiness to evaluate the surface of various composite resins and attempted to evaluate the maintenance of glossiness of composite resins by observing surfaces that change to roughness. Specimens were produced using resin used in clinical practice: Gradia direct anterior (GA), Tetric N-Ceram (TN), Ceram.X Sphere TEC one (CX), Filtek Z350XT (FT), Estelite sigma quick (ES). After creating a smooth surface with slide glass, five locations were randomly selected to measure surface gloss, and the average was the representative value of the specimen. Roughness was applied to the specimen under water pouring at the same speed and pressure using SiC paper #2400, 1200, and 400. The gloss unit of different SiC papers was measured. To evaluate the gloss unit and gloss retention between composite resins, one-way analysis of variance and Tukey multiple comparisons test were used. As a result of the study, there was a difference in gloss unit of specimens produced under the same conditions. Although the degree differed depending on the composite resin, there was also a difference in gloss retention. Based on the findings, composite resins show differences in gloss due to their different characteristics. Ceram.X Sphere TEC one (CX) showing the lowest gloss retention and Estelite sigma quick (ES) showing the highest.

• 대한치과보철학회지
• /
• 제51권2호
• /
• pp.99-106
• /
• 2013

연구 목적: 본 연구의 목적은 다이의 수렴각과 치관길이의 차이와 시멘트 종류의 차이가 전부주조관의 유지력에 미치는 영향을 비교한 것이다. 연구 재료 및 방법: 치관 길이 5 mm와 10 mm의 금속다이를 각각 5, 10, 15, 25도의 수렴각을 갖도록 제작한 후 전부주조관을 치과용 시멘트 중, 인산아연 시멘트(Fleck's Zinc Phosphate Cement, Mizzy Co., Cherry Hill, NJ, USA), 레진-변형 글래스 아이오노머 시멘트(Vitremer, 3M Dental Products, St, Paul, MN, USA), 레진 시멘트(Panavia 21, Kuraray Co., Osaka, Japan)로 합착하고 500회 thermocycling을 시도한 후, Instron Universal Testing Machine (Instron Corp., Canton, MA, USA)에 장착시켜, 인장력을 가하여 전부주조금관이 분리될 때 까지 인장력을 측정하여 분리되는 순간의 최대하중값(N)을 측정, 비교하였다. 통계분석은 측정된 각 군간 유지력의 상호관계를 알아보기 위하여 one-way 및 two-way ANOVA를 시행하였고 동일 길이를 가진 시멘트 군 사이에서의 수렴각 차이에 따른 영향, 다이 길이 증가에 따른 영향 및 유지력 차이를 검정하기 위해 t-test를, 수렴각 증가 에 따른 유의성을 살펴 보기 위해서는 Tukey's HSD test를 시행하였다(${\alpha}$=0.05). 결과: 동일 수렴각에서 평균 유지력은 레진 시멘트, 인산아연 시멘트, 레진-변형 글래스 아이오노머 시멘트 순으로 높게 나타났으며 모든 시멘트에서 수렴각의 증가에 따 라서 평균 유지력은 유의차를 보이면서 감소하였다(P<.05). 동일 수렴각에서 10 mm 실험군은 다이 길이 5 mm 실험군과 비교해보았을 때 길이 증가에 따른 유지력의 증가가 통계학적으로 유의차를 나타내면서 증가된 결과를 보였다. 5 mm 실험군에서 유지력은 수렴각의 변화와 시멘트의 종류, 수렴각과 시멘트의 상호영향(interaction)에서 모두 유의성 있는 차이를 보였다(P=.001). 각 시멘트 군에서의 유지력은 10 mm 길이 금속 다이의 수렴각이 증가할수록 유의한 차이를 보이면서 감소한 것으로 나타났다 (P=.0001). 결론: 임상에서 사용되고 있는 특정 치과용 시멘트의 적용시 유지력은 지대치의 기하학적 형태에 영향을 받고 있으며 서로 다른 치관 길이와 수렴각을 가지는 경우 유지 력 증가를 위해 시멘트 선택에 있어 주의가 요망된다.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.373-382
• /
• 2022

Unsaturated soil at high suctions is widespread. Many civil engineering projects are related to the hydro-mechanical behavior of unsaturated soils at high suctions, particularly in arid and semiarid areas. To investigate water retention behaviors of nine clayey soils (one is classified as fat clay and the others are classified as lean clay according to the unified soil classification system), the high suction (3.29-286.7 MPa) was imposed on the specimens at zero net stress by the vapor equilibrium technique. In this paper, the effect of void ratio on the water retention behavior at high suction was discussed in detail. Validation data showed that soil types, i.e., different mineralogical compositions, are critical in the soil water retention behavior at a high suction range. Second, the hysteresis behavior at a high suction range is mainly related to the clay content and the specific surface area. And the mechanism of water retention and hysteresis behavior at high suctions was discussed. Moreover, the maximum suction is not a unique value, and it is crucial to determine the maximum suction value accurately, especially for the shear strength prediction at high suctions. If the soil consists of hydrophilic minerals such as montmorillonite and illite, the maximum suction will be lower than 10⁶ kPa. Finally, using the area of hysteresis to quantify the degree of hysteresis at a high suction range is proposed. There was a good correlation between the area of hydraulic hysteresis and the specific surface area.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.30-36
• /
• 1994

Steam explosion process is one of the most efficient, pretreatment method for the utilization of lignocellulosic biomass. The carbxymethyl-cellulose(CMC) was prepared with steam exploded wood(EXW), pine(Pinus densiflora) and oak(Quercus mongolica), by standard method using isopropyl alcohol and monochloroacetic acid. The range of water solubility of carboxymethylated pine exploded wood was 45.2~66.8 % and those of oak was 60.7~84.7 %. The degree of substitution(D.S) of carboxymethylated pine exploded wood was 0.11~0.33 and oak exploded wood was 0.48~0.76. The color of carboxymethylated pine and oak exploded wood was brown-black. When carboxymethylated EXW was purified by sulfuric acid, the yield of carboxymethylated wood was lower than non-treated one. However, the color was still brown-black although after delignification. In carboxymethylated EXM prepared after delignification, the water solubility and degree of substitution(D.S) of pine were 81.4~95.9 % and 0.71~0.79, and those of oak were 76.2~89.5 % and 0.79~1.05. The values were higher than non-treated. The degree of substitution of purified carboxymethylated wood prepared with delignified EXM, pine and oak were 0.50~0.71 and 0.70~0.88. The color of carboxymethylated wood was white. In carboxymethylated wood preparde after delignification of EXM, swelling ratio and water retention value of pine were 95.9~96.5 and 580.0~751.2, those of oak were 76.2~89.5 and 124.3~307.6.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.800-817
• /
• 1996

In this study, we tried to evaluate the effect of Amalgambond liner application on the degree of marginal leakage and retention of amalgam restoration by comparing with that of the Copalite and All-bond 2. The results obtained from this experiment were as follows; 1. Tensile strength representing the bond between amalgam and tooth structure was the highest in Amalgambond, and All-Bond 2, Copalite in descending order. There were statistically significant difference between each group(P<0.05). 2. The degree of microleakage in Amalgambond was lower than that of All-Bond 2, and Copalite, but no stastically significant difference could be found (P>0.05). 3. The liner such as Amalgambond or All-Bond 2 were evaluated to be superior to the conventional Copalite in bond strength as well as in microleakage. But the result of this study could not show the superiority of one material over the others; Amalgambond and All-bond 2. Besides the results of the study, other factors, such as practical convenience, should be considered in determining the selection of material. The support of welldesigned clinical studies on this subject are in demand.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.141-142
• /
• 2019

In this study, we conducted a comparative analysis of the effects of retention time and resuscitation method on the degree of resuscitation after reapplying mortar with much FA replacement. Results After applying NaOH to the top surface of 60 % FA-substituted mortar, the degree of resuscitation at $40^{\circ}C$ was high enough to increase the overall curing time, but there was no significant difference. However, with regard to the curing method, middle curing showed the greatest manifestation, followed by wrapping and underwater curing, but there was no significant difference. The resuscitation level on the 28th of the lumber was found to be revived to about 70~80 % at around 30 % without resuscitation.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.99-108
• /
• 1998

Results obtained from this research showed that the anaerobic contact process was applicable to pear waste with COD removal efficiencies of up to $95\%$ depending on conditions, provided ammonium and phosphate salts were added as well as other nutrients, present in the commercial fertilizer, Milorganite or in yeast extract. These latter materials were required in minimum concentrations of 5 and 1.5 g/L, respectively, in the feed independent of HRT and volatile solids loading rate, with part of the effect due to the mineral fraction. Digestion was satisfactory over the whole range of volatile solids loading rates and liquid retention time of 30 to 0.5 days tested, although treatment efficiency dropped off noticeably between 1 and 0.5 day liquid retention time because of poorer flocculation and separation of anaerobic bacteria. Settling of anaerobic bacteria including methane producing bacteria was related to settling of mixed liquor suspended solids only at 1 to 5 days liquid retention times, at other liquid retention times anaerobic microorganism settled markedly less efficiently than mixed liquor suspended solids. Further studies are being made to provide information of practical and basic interest. Data on the composition of the active fraction of yeast extract might solve many practical nutrient problems encountered with the anaerobic contact process and improve its economics. Further improvement in the flocculation and settling of anaerobic bacteria as well as other bacteria would improve overall performance and allow the use of shorter liquid retention times with dilute waste. Knowledge about the numbers of methane formers present would allow a degree of understanding and control of the process not presently attainable.

• 영어어문교육
• /
• 제10권2호
• /
• pp.89-111
• /
• 2004

The purpose of this article is to study the effect of finger play teaching method on the reproduction of children's English words. The hypotheses are as follows: 1) there will be the difference of the reproduction of children's English words between the experimental group(that is taught by finger play teaching method) and the controlled group (that is taught by only oral teaching method). 2) there will be the difference of children's retention capacity of reproducing English words between the experimental group and the controlled group, The researcher made the time series data The measure tool was the check list for reproduction test of children's English words that was made by Run-Soon Oh and J. Eden(2004). The researcher analyzed the data using the Repeated Measures ANOVA and the Analysis of Covariance. The findings of research are as follows: 1) the more the frequency of teaching increases, the more there are the difference of reproducing English words according to frequencies and groups. The reproduction capacity of the experimental group is better than that of the controlled group. A degree of statistical significance is p<.001. 2) The difference of retention capacity of reproducing English words between the experimental group and the controlled group is a statistical significant, p<.05. The experimental group is better than the controlled group.

• 한국산림과학회지
• /
• 제57권1호
• /
• pp.14-19
• /
• 1982

고수율(高收率) 설파이트 펄프제조시 생성(生成)되는 미세섬유(微細纖維)는 쇄목(碎木) 펄프제조시 생성(生成)되는 미세섬유(微細纖維)보다 더 높은 보수도(保水度)를 갖이므로 종이제조시 전체적(全體的) 혹은 부분적(部分的)으로 섬유표면(纖維表面)에 유착되어 섬유간(纖維間) 결합(結合)에 기여함으로서 종이의 강도(强度)를 증진(增進)시킨다. 반면 섬유(纖維)의 연화(軟化) 및 미세섬유(微細纖維)의 높은 팽윤성(膨潤性)은 종이의 비산란계수(比散亂係數)를 현저히 감소(減少)시킨다. 이와 같은 경향은 전처리수율(前處理收率)이 낮을수록 그리고 미세섬유(微細纖維)의 보수도(保水度)가 높을수록 현저(顯著)하다.