• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3001-3004
• /
• 2014

A series of hydroxyl-derivatized quaternized polymers were successfully synthesized by atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry), followed by quaternization reactions. ATRP was employed to synthesize poly(2-hydroxyethyl methacrylate) (PHEMA), followed by introduction of alkyne groups using pentynoic acid, leading to HEMA-Alkyne. 2-Azido-1-ethanol and 3-azido-1-propanol were combined with the HEMA-Alkyne backbone via click reaction, resulting in triazole-ring containing hydroxyl-derivatized polymers. Quaternization reactions with methyl iodide were conducted on the triazole ring of each polymer. Molecular weight, molecular weight distribution, and the degree of quaternization (DQ) were determined by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The average molecular weight ($M_n$) of the resulting polymers ranged from $5.9{\times}10^4$ to $1.05{\times}10^5g/mol$ depending on the molecular architecture. The molecular weight distribution was low ($M_w/M_n$ = 1.26-1.38). The transmission spectra of the 0.1 wt % aqueous solutions of the resulting quaternized polymers at 650 nm were measured as a function of temperature. Results showed that the upper critical solution temperature (UCST) could be finely controlled by the level of DQ.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.115-115
• /
• 1999

In this work a new process was developed for the sulfonation of the chemicallly stable engineering polymer polyethersulfone as membrane materials for electrodialysis or a flow battery applications. Commercially available polyethersulfone polymer was partially sulfonated using a CSA sulfonating agent in a dichloromethane solvent, which sulfonated polyethersulfone with various sulfonation levels have been prepared. Sulfonated polyethersulfone (SPES) membranes with different ion capacities were prepared for the purpose of identifying cation exchange membrane properties, in an attempt to find a low cost replacement for Nafion, which most of the perfluorinated membranes, known to exhibit a prolonged service life, are expensive and difficult to process. The following features were determined: the degree of sulfonation, water uptake, thermal analysis, and electrochemical properties such as ion exchange capacities, resistivity, selectivity of ion permeation. The surface of the cation exchange membranes, decomposed with the H202-treatment, were observed by using scanning electron microscope. The area resistivities of SPES mebranes in 5N-NaOH decreased from $2,150{\;}{\Omega}-cm2$ to less than $15{\Omega}-cm2$ as the ion exchange capacity (IEC) increased from 0.62 to 1.73 millieequivlants per dry gram(meq/dg).eq/dg).

• 한국물환경학회지
• /
• 제21권2호
• /
• pp.205-210
• /
• 2005

There has been a growing interest in NF membrane for drinking water treatment, because it can remove simultaneously both hardness and hazardous micro pollutants such as pesticides and THM precursors. In this work, a hollow fiber NF membrane known as a composite membrane was employed for the rejection properties of both hydrophilic solutes and micro organic pollutants, where the former was used to evaluate the molecular sieving effect of this membrane and the latter was employed for the investigation of solute-membrane interaction as hydrophobic materials. This membrane effectively rejected the hydrophilic solutes and the permeation of them was mainly controlled by the molecular sieving effects such as molecular weight and molecular width. In the case of all micro organic pollutants, the rejections were varied from 42.2% for Simazine to 91.6% for Malathion, and the parameters related to the steric hindrance could significantly play an important role in the rejection. In the batch type adsorption experiments, all micro organic pollutants were entrapped mildly on the membrane in spite of lower degree compared with that of aromatic compounds, and they were correlated with log K.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.541-546
• /
• 2007

The combination of atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of well-defined block copolymers. Bromo terminated poly(methyl acrylate) (pMA-Br) was prepared by an ATRP initiator, ethyl-2-bromoisobutyrate (EBiB). Subsequently, the bromine chain end of pMA-Br was converted to an azide group by simple nucleophilic substitution reaction. ${\alpha}-Alkyn-{\omega}-bromo-functionalized$ polystyrene was also synthesized by ATRP using the alkyn-functionalized initiator, propargyl-2-bromoisobutyrate (PgBiB). In both cases, the conversion was limited to a low level to ensure a high degree of chain end functionality. Then the coupling reaction between the azide end group in $pMA-N_3$ and alkyn-functionalized PgBiB-pSt was performed by Cu(I)catalysis. This coupling reaction was monitored by gel permeation chromatography (GPC). The synthesized block copolymer was characterized by FT-IR, $^1H-NMR$ spectroscopy and $^1H-^1H$ COSY correlation spectroscopy.

• 멤브레인
• /
• 제9권3호
• /
• pp.170-177
• /
• 1999

Polysulfone을 술폰화하여 물-부탄올 용액의 분리를 위한 투과증발용 비대칭막을 제조하였다. 술론화제로는 chlorosulfoneic acid-trimethyulchlorosilane을 반응시킨 후 이용하였다. FT-IR과 $^1H$-NMR을 이용하여 치환여부를 살펴보았고 술폰화정도는 역적정법과 $^1H$H-NMR을 이용하여 구하였다. DSC와 TGA를 이용하여 열적특성변화를 알아보았다. 비대칭막을 제조하기 위하여 N-methyl-2-pyrrolidone(NMP)rhkdiethyleneglycol dimethyl ether (DGDE)의 혼합용매를 사용하였다. SEM을 이용하여 단면과 skinlayer 의 구조변화를 살펴보았다. 한 연구에서 제조한 비대칭막은 dense film에 비하여 물에 대한 선택도는 거의 변화가 없고 투과유량은 약 80배 정도 증가하였다.

• 멤브레인
• /
• 제21권1호
• /
• pp.13-21
• /
• 2011

본 연구는 폴리에틸렌 정밀여과 막을 이용한 $Al_2O_3$ 콜로이드 현탁액의 운전압력 순환변화에 따른 투과거동을 검토하였다. 운전압력의 순환은 0.49에서 1.96 bar까지 증가시키는 증압운전 후 다시 0.49 bar로 감소시키는 감압운전으로 행하였다. 연속적으로 운전압력을 순환변화 시킨 결과, 증압운전과 감압운전의 투과유속이 서로 다른 이력(hysteresis)을 나타냈다. 현탁액의 투과저항은 감압운전의 경우가 증압운전의 경우보다 컸으며, 투과저항 증가율도 컸다. 막오염 형태는 증압운전과 감압운전 모두 운전초기에 케익오염이 강하게 나타났으며, 막오염의 크기는 감압운전의 오염이 증압운전의 오염보다 컸다.

• 한국컴퓨터정보학회논문지
• /
• 제10권4호
• /
• pp.57-63
• /
• 2005

지하수 분석에서 투수도, 저류 계수, 경계조건 등의 입력 자료를 잘못 추정할 경우 수학적 해석해를 사용하는 수계산 방법보다 부정확한 결과를 얻을 수 있기 때문에 정확한 시스템 모델을 적용하기 위해서는 현장의 파라미터에 대한 정확하고 방대한 조사 작업이 필요하다. 최근 이러한 파라미터를 쉽게 다루고자하는 연구가 활발히 진행되어 왔다. 본 연구에서는 모델운영에 있어서 이러한 문제점을 방지하기 위하여 대표적으로 많이 사용되고 있는 MODFLOW 모델에 대한 조사를 수행하고, ArcView와 연계방법을 개발하여 입력자료 및 파라미터 등을 정확하고 쉽게 입력할 수 있는 방법을 제안한다. ArcView의 기능과 연계하여 구축된 시스템의 수행결과를 시각적으로 서비스 할 수 있도록 하였다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1997년도 춘계학술대회
• /
• pp.116-116
• /
• 1997

Complex formation of practically insoluble dexamethasone dipropionate (DDP) with ${\beta}$-cyclodextrin (${\beta}$-CD), dimethyl-${\beta}$-cyclodextrin (DMCD), trimethyl-${\beta}$-cyclodextrin (TMCD), 2-hydroxypropyl-${\beta}$-cyclodextrin (HPCD) and sulfobutyl ether ${\beta}$-cyclodextrin (SBCD) in water was investigated by solubility method at various temperatures. Water solubility of DDP was found to be 1.78 $\mu\textrm{g}$/$m\ell$ at 37$^{\circ}C$. Propylene glycol (PG)-water cosolvent increased the solubility of DDP, but the solubilization was not sufficient (8.93 $\mu\textrm{g}$/$m\ell$ in 20% PG). The addition of CD markedly increased the solubility of DDP in water, and A$\sub$L/ type phase solubility diagrams were obtained with ${\beta}$-CD, TMCD, HPCD and SBCD, where the apparent stability constants of the soluble complexes at 25$^{\circ}C$ were determined to be 1388, 216, 1054, and 1992 M$\^$-1/, respectively. However, DMCD remarkably increased the solubility of DDP, and showed an A$\sub$P/ type diagram, suggesting that DMCD forms a soluble complex of high order with DDP. The stability constant for the DDP-DMCD complex at 25$^{\circ}C$ was determined to be 19132 M$\^$-1/. The thermodynamic parameters were calculated for the inclusion complex formation in aqueous solution. CD (1${\times}$10$\^$-2/M) remarkably decreased the partition coefficients of DDP between isopropyl myristate/water in the order of TMCD < ${\beta}$-CD < HPCD < SBCD < DMCD, and in squalane/water system in the order of HPCD < TMCD < ${\beta}$-CD < DMCD < DMCD $\leq$ SBCD. This finding represents that, in a o/w type cream, cyclodextrin complexation with DDP may result in high concentration of DDP in aqueous phase. The permeation of DDP through a cellophane membrane was highly suppressed by the addition of CD, and the degree of suppression was different among CDs, indicating that CD may control the skin permeation of DDP. The dissolution rates of solid dispersions with CDs were much faster than those of drugs alone and corresponding physical mixtures. All DDP-CD solid dispersions exceeded the equilibrium solubility. Consequently these results suggest that complex formation of DDP with CDs may provide useful means to markedly enhance the solubility, and CDs are useful in the semi-solid preparations such as creams and gels for topical application.

• 한국응용과학기술학회지
• /
• 제41권1호
• /
• pp.1-8
• /
• 2024

화장품 소재는 안전성이 무엇보다 중요시된다. 화장품에 사용되는 기존의 보존제인 PE에 대장균 효소 𝛽-gal을 이용하여 안전성이 증가된 PE-gal을 생합성하였다. 화장품 소재로 사용하기 위해 생합성된 생성물인 PE-gal의 피부 흡수도를 기존의 보존제인 PE와 비교하기 위해 Franz Diffusion cell Assay 시스템을 이용하여 경피투과도를 측정하였다. 같은 질량농도의 시료를 사용하였을 때 PE의 Flux 값, Kp 값은 시간이 지날수록 증가하는 것으로 나타났으나 PE-gal은 투과도를 측정할 수 있을 만큼 투과되지 못하였다. 이는 PE의 피부투과도가 생합성된 PE-gal 배당체보다 높다는 것을 나타낸다. Marzulli 등에 따라 Kp 값을 이용하여 투과 정도를 확인하였을 때 PE의 투과속도는 1mg/mL의 농도에서 느림(slow)으로 측정되었다. 따라서 배당체 형태의 PE-gal은 PE에 비해 경피 투과도가 현저히 낮게 나타났다.

• 한국잠사곤충학회지
• /
• 제50권2호
• /
• pp.145-149
• /
• 2012

세크로핀(cecropin)은 곤충의 체액성 면역에 있어서 효과적인 방어인자로 작용하는 항균 펩타이드로 잘 알려져 있다. 본 연구에서는 면역 유도된 천잠, Antheraea yamamai 유충 혈림프로부터 세크로핀 항균 펩타이드 분리 및 정제를 실시하였다. 먼저 항균 펩타이드를 분리하기 위해서, 면역 유도된 유충 및 정상 유충으로부터 추출된 혈림프 단백질 시료에 대한 단백질 전기영동(SDS-PAGE)를 통하여 비교분석하였다. 정상누에 혈림프 시료에 비해 면역 유도된 혈림프 추출물에서만 특이적으로 발현되는 분자량 4,223.01 Da의 펩타이드 밴드를 검출하였다. 선발된 면역유도 특이적 발현 펩타이드의 특성 분석을 위해서 이온교환 크로마토그래피 및 gel permeation 크래마토그래피을 수행하여 특이적으로 발현되는 펩타이드를 성공적으로 순수 정제하였다. 정제된 펩타이드는 Edman degradation법으로 N말단 아미노산 서열을 결정하였고 다른 나비목곤충의 세크로핀과 매우 높은 상동성을 나타내어 세크로핀으로 동정하였다. 또한 정제된 천잠 세크로핀 항균 펩타이드는 그람음성세균, 그람양성세균 및 곰팡이에 대해 폭 넓은 항균 스펙트럼을 나타냈었다.