• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.341-342
• /
• 2008

• 대한가정학회지
• /
• 제38권10호
• /
• pp.27-43
• /
• 2000

The CDP in Korea has been enforced for conserving resources and reducing environmental pollution since March, 1999. Therefore this thesis aims to investigate the degrees of consumer participation(CP), recognition and support, and to analysis of demographic variables, consumers' psychology, and attitudes which may influence the degrees of CP recognition, and support for the CDP. The results were as follows: First, the time of surrey was found to be statistically significant in consumer recognition and support. The degree of recognition was the lowest in first time. And the degree of consumer support was the highest in first time. Second, education, employment status and house shape were found to be statistically significant. The degree of consumer recognition was the highest among junior college graduates. The employed group was found to be the highest in the degree of participation. Third, the significant factors which influenced the degree of recognition was the time of survey, the perceived difficulty, effectiveness of the Consumer Deposit Program. The perceived difficulty, the time of survey were found to be related with the degree of consumer support. The most influential variables which influenced the degree of consumer participation were house shape, the perceived effectiveness, the degree of resource recycling, job and the degree of consumer recognition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.217-222
• /
• 1994

This paper describes the determination of optimal initial billet size for axisymmetric cold forging products using neural networks. The determination of optimal initial billet size is very important in forging design and forming sequence design, because the result of such designs and forming load can be different by variable initial billet sizes. The forming difficulty has been defined as the degree of difficulty in forming by 3 process ' forward extrusion, backward extrusion and upsetting. By neural networks a forming difficulty can be determined with the ratio of shape and forming process. From the graph of maximum, minimum, and average forming difficulties by variable billet sizes, the optimal billet size can be determined. The initial billets of a solid part and a hollow part whichwas determined by this study are compared with the sequence drawing generated by the one of forming sequence design system.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.233-238
• /
• 1998

To manage a phase of coding and unit-test, project managers have used to pay attention to a number of completed programs. And the manager makes a graph of progress. Usually, this graph of progress has S shape and doesn't linearly depend on the workload. So the degree of progress seems to be behind. In actual, many projects tend to be behind the schedule. Because of this reason, it is difficult to judge whether the project is behind or not in the early stage. In this paper, We propose the 'four-division model' to solve this difficulty.

• Structural Engineering and Mechanics
• /
• 제22권2호
• /
• pp.131-150
• /
• 2006

Exact analytical solutions for in-plane static problems of planar curved beams with variable curvatures and variable cross-sections are derived by using the initial value method. The governing equations include the axial extension and shear deformation effects. The fundamental matrix required by the initial value method is obtained analytically. Then, the displacements, slopes and stress resultants are found analytically along the beam axis by using the fundamental matrix. The results are given in analytical forms. In order to show the advantages of the method, some examples are solved and the results are compared with the existing results in the literature. One of the advantages of the proposed method is that the high degree of statically indeterminacy adds no extra difficulty to the solution. For some examples, the deformed shape along the beam axis is determined and plotted and also the slope and stress resultants are given in tables.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.445-454
• /
• 2008

The existing baseline taping methods were not applicable sometimes according to the body shape of dress form and they were often dependent on the personal ability and knowledge of modelist. It is very important to suggest the standardized baseline taping method which is applicable to various dress forms which have different body size and shape. It helps to communicate about clothing design and patternmaking between designer and manufacturer, and it also makes students to understand draping easily. So this study was performed to suggest the standardized baseline taping method which is easier and has consistency of taping result regardless of body shape of dress form. First, the existing 7 baseline taping methods were compared with 3 kinds of dress form which are reflecting different body shape and different age. Especially the location of baselines and landmarks which are important for draping are analyzed. Second, the new baseline taping method was developed with reference to the existing baseline taping methods, the standard body measurements of 2004 Size Korea and flat patternmaking. The standardized method for 12 landmarks and 11 baseline was suggested. Third, the appraisal group has performed baseline taping with both the existing method and new method on 2 kinds of dress form. The new method was superior to the existing method in uniformity of taping results as well as the degree of difficulty of taping. Development of the standardized baseline taping method which is applicable to various dress forms would make draping easier and be useful for both apparel industry and academia.

• 한국초등과학교육학회지:초등과학교육
• /
• 제38권2호
• /
• pp.216-233
• /
• 2019

The purpose of this study was to identify the aspects of elementary school students' interactions shown conceptual changes in collaborative scientific argumentation. Fifty sixth graders of an elementary school in Jeonju were selected for this study. Ten small groups consisting of five students each were organized evenly with considerations of their gender, science achievement, scientific discussion experience and degree of communication apprehension. 'Food web and Ecosystem' and 'Change of Moon shape' were selected as the proper topics of collaborative scientific argumentation in terms of difficulty to be understanded by the $6^{th}$ graders. The small group's dialogue was recorded. The students' activity sheets, field note and interviews of the participants were collected. Based on the collected data, we analyzed the aspect of small groups' interaction shown conceptual change of each student. The result of this study was as follows: The interaction aspects of the small group of students who showed conceptual changes in the collaborative scientific discussion have a tendency of showing their discussion responses, explanation-opposition discourse, the use of rigorous criteria, their collaborative attitude and participation.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.141-148
• /
• 2017

A process comprising a hot extrusion process and a warm forging process was designed to form a T-shaped aluminum structural component with a high degree of difficulty by the plastic forming method. A circular cylindrical part was extruded with a hot extrusion process, and then an embossing part was formed with a warm forging process. The formability and the maximum load required for forming were then determined using a forming analysis program. The hot extrusion process was executed at $450^{\circ}C$ under the extrusion speed at 6 mm/s, while the warm forging process was executed at $260^{\circ}C$ under the forging speed at 150 mm/s. For both the processes, a condition by which friction would not be generated between the mold and the material was implemented. The analysis results showed that the load required for hot extrusion was 1,019 tons, while the load required for the warm forging was 534 tons. The T-shaped part was manufactured by using a 1,600 tons capacity press. The graphite lubricant was coated on the mold as well as the material. A forming experiment was performed under the same condition with the analysis condition. The measured values from the load cell were 1,210 tons in the hot extrusion process and 600 tons in the warm forging process.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.127-136
• /
• 2002

본 논문은 교량 구조물의 손상위치 및 손상정도를 평가하기 위해 제한된 모드형상을 사용한 손상지수 방법에 기초한 실용적이며 개선된 손상평가 알고리즘을 제안한다. 손상평가 알고리즘에서 손상전 ·후의 구조물로부터 획득한 모드 벡터의 민감도 비에 근거한 손상지수를 사용하여 손상위치의 파악 및 손상정도를 평가한다. 그러나 모드형상의 진폭이 거의 영의 값을 가지는 요소에 손상이 존재하면 모드벡터 민감도 비는 무한대의 값을 가지게 되며, 이는 손상평가를 불가능하게 한다. 따라서 본 논문에서는 구조물의 모드형상과 비례하는 민감도 필터를 도입한 개선된 기법을 적용함으로써, 이러한 문제점을 극복하였으며 또한 기존의 방법보다 손상위치와 손상정도 평가에 있어 상당한 정확도의 향상을 구현하였다. 제안된 알고리즘을 검증하기 위해 단순보와 2경간 연속보에 대해 손상평가를 수행하였으며, 기존의 방법에 의한 결과와 비교하였다.