• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1394-1397
• /
• 1995

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be of explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, sand filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy: this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Eletrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of eletrode make-and-break speed and magnetic field magnitude.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.491-498
• /
• 2003

The advanced computer network technology enables connectivity of computers through an open network environment. There has been growing numbers of security threat to the networks. Therefore, it requires intrusion detection and prevention technologies. In this paper, we propose a network based intrusion detection model using FCM(Fuzzy Cognitive Maps) that can detect intrusion by the DoS attack detection method adopting the packet analyses. A DoS attack appears in the form of the Probe and Syn Flooding attack which is a typical example. The SPuF(Syn flooding Preventer using Fussy cognitive maps) model captures and analyzes the packet informations to detect Syn flooding attack. Using the result of analysis of decision module, which utilized FCM, the decision module measures the degree of danger of the DoS and trains the response module to deal with attacks. For the performance comparison, the "KDD′99 Competition Data Set" made by MIT Lincoln Labs was used. The result of simulating the "KDD′99 Competition Data Set" in the SPuF model shows that the probe detection rates were over 97 percentages.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1049-1056
• /
• 2005

The purpose of the study was to investigate adolescents' attitudes toward clothing advertisements and, to examine how much the influence of clothing ads on their clothing purchase depends on their clothing involvements. This research was based on a survey method using questionnaires. The subjects for the research were 508 middle and high school students in the area of Daegu City and Gyungbuk Province. Such methods as factor analysis, correlations, ANOVA, T-test and Scheff's test were used to analyze the collected data. The results of this study can be summarized as follows: 1. Adolescents' clothing involvements showed three dimensions such as interest and symbolism, fashion and danger perception. 2. They showed three different attitudes toward clothing ads: positive, negative, and reliant. 3. The degree of the influence of clothing ads on adolescents' clothing purchase was great in the order of media ads, shop ads, discount ads and brand ads. 4. The more interested they were in clothing, the more likely they were to purchase their clothing on their will and the more positive and reliant on clothing ads they were, which they recognized as useful information.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.63-70
• /
• 2012

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be the explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, powder filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy; this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Electrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type(International Electro-technical Commission) spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of electrode make-and-break speed.

• Journal of Navigation and Port Research
• /
• v.33 no.7
• /
• pp.463-467
• /
• 2009

In near future, more congested and dangerous marine traffic environment due to the rapid marine traffics increase and ship handling difficulty by enlargement of ship size is predicted. In this paper, an navigation supporting system proposal made to enhance the safe navigation by providing the collision avoidance informations to the navigator via marine traffic environment assessment. Proposed navigation supporting system displays results of marine traffic environment assessment, degree of the dangers and gives reason of danger which is enhance situational awareness of navigator. For this purpose, results of marine traffic environment assessment which is obtained via real time assessment sent to the designated server and through the connection with navigation supporting system navigator being enable to see all those informations on the computer screen Navigator would utilize those information to make a decision in the difficult waterways and thus safe navigation could be enhanced.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.19-30
• /
• 2009

Recent development in wireless communication technology and mobile equipment like PDA, cellular phone and GPS makes location-based services (LBSs) popular. However, because, in the LBSs, users continuously request a query to LBS servers by using their exact locations, privacy information could be in danger. Therefore, a mechanism for users' privacy protection is required for the safe and comfortable use of LBSs by mobile users. For this, this paper propose a grid-based cloaking area creation scheme supporting continuous LBSs. The proposed scheme creates a cloaking area rapidly by using grid-based cell expansion to efficiently support the continuous LBSs. In addition, to generate a cloaking area which makes the exposure probability of a mobile user to a minimum, we compute a privacy protection degree by granting weights to mobile users. Finally, we show from a performance analysis that our cloaking scheme outperforms the existing cloaking schemes, in terms of service time, privacy protection degree.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.73-80
• /
• 2015

The valve device is installed in hazardous areas, such as a chemical plant explosion has been sealed with fire protection device to prevent the risk of explosion. In this paper, due to the explosion-proof devices using external power the device can not be used in infrared sensors and Zigbee sensor valve device by measuring the open degree of valve opening and closing of the danger zone to check whether. Valve opening and closing operation log screen time, we propose a low-power operation monitoring system administrators to manage and control the plant. Develop power control relay board apply an improved algorithm to apply the asynchronous LPL power management. The plant monitoring system and explosion-proof valve opening and closing the valve system with the intelligent device designed and implemented and tested it.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.123-132
• /
• 2012

PURPOSES: This study is to investigate the consideration which relates with a disaster from route alignment process and proposed the method it will be able to evaluate a disaster danger fixed quantity. METHODS: Use the landslide disaster probabilistic map of GIS based and in about landslide occurrence of the route alignment at the time of neighboring area after evaluating a risk fixed quantity, it compared LCC expense in about each alternative route. It developed the system it will be able to analyze a LCC and a disaster risk in about the alternative route. In order to verify a risk analytical algorithm and the system which are developed it selected national road 59 lines on the demonstrative route and it analyzed a disaster risk. RESULTS: Demonstrative route not only the disaster risk to be it will be able to compare a disaster risk fixed quantity like the economical efficiency degree in compliance with LCC expense productions it compared and there being the designer will be able to decide the alternative route, it confirmed. CONCLUSIONS: Roads can be designed by considering occurs repeatedly landslides and debris flow caused by disasters in advance and expect to be able to effect that can reduce the overall cost to recover losses caused by the disaster, and temporally loss is expected.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.149-159
• /
• 2017

There are many studies on the health and protection of Old-growth and Giant Trees, concentrating on empirical judgment and basic protection measures. The problem this study addresses is the relative importance and priority of the health evaluation indicators of Old-growth and Giant Trees. Firstly, this study exports the evaluation indicators of Old-growth and Giant Trees. The evaluation system for the degree of danger of Old-growth and Giant Trees are composed of two layers: 5 fields and 46 indicators. Secondly, using the AHP and PCA method can determine the weight of each field and each index factor. The process of AHP establishes the relative importance judgment matrix of each field and fully proves that the main cause of danger is individual aging. The PCA method suggested that trunk rot status, light conditions, tree surgeries, bacterial diseases, and soil moisture level are the most important factors in each field. These aspects should be given priority in the management and protection of Old-growth and Giant Trees. Weight values obtained in this study seemed to be useful in the evaluation of Old-growth and Giant Trees.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.1-7
• /
• 2012

At the industrial work site, the manufacturing process is being automated to improve work efficiency. However, it is often difficult to automate the entire manufacturing process, and there are spaces in which workers there are constantly exposed to danger. To protect such workers from the danger, this paper studied a worker safety management system for the industrial work site which uses a location recognition system and which is based on the Ubiquitous-Wireless Sensor Network (U-WSN). Using wireless signals, the distance between two devices can be measured and the location of a worker can be calculated using triangularization in 3-D. But at the industrial work sites where there are a lot of steel and structures, errors occur due to signal reflection and multi-path, etc., which makes it difficult to get the accurate location. To address this problem the following was done: first, a circular polarization patch antenna appropriate to the work site was used to reduce the degree of error that may occur from the antenna emission pattern and the particular Line of Sight (LOS); second, a 3-D localization technique and a filtering algorithm were used to improve the accuracy of location determination. The developed system was tested by using it on a wharf crane to validate its accuracy and effectiveness. The proposed location recognition system is expected to contribute greatly in ensuring the safety of workers at industrial work sites.