• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.943-947
• /
• 2008

Dynamic response characteristics of a beam undergoing impulsive force are investigated using the wavelet transform method in this study. When an impulse is applied to an arbitrary position of a beam, it will generate a structural deformation wave. The characteristics of the wave are changing in the domain of time and space. The maximum amplitude of each natural frequency mode and the time to reach the maximum amplitude are obtained in this study. The effects of the location of impulse on the variations of the dynamic characteristics is also investigated.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.107-114
• /
• 2017

Design of stepwise foam claddings subjected to air-blast is performed based on random Voronoialgorithm. FE models are constructed using the random Voronoialgorithm, and numerical analysis is carried out to simulate deformation mode and energy absorption of the cladding by the ABAQUS/Explicit software. The FE model is validated by test result, and good agreement is achieved. The deformation patterns are presented to give an insight into the influences of distribution on deformation mechanisms. The energy absorbed by the stepwise foam cladding is examined, and the parameter effects, including layer number, gradient, and blast loading, are discussed. Results indicate that the energy absorption capacity increases with the number of layer, gradient degree, and blast pressure increasing.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.463-474
• /
• 1995

When a tubular cantilever beam is loaded by a dynamic force applied transversely at its tip, the strain hardening of the material tends to increase the load carrying capacity and local buckling and cross-sectional overlization occurring in the tube section tends to reduce the moment carrying capacity and results in structural softening. A theoretical model is presented in this paper to analyze the deformation of a tubular beam in a dynamic response mode. Based on a large deflection analysis, the hardening/softening M-${\kappa}$ relationship is introduced. The main interest is on the curvature development history and the deformed configuration of the beam.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.753-777
• /
• 2014

This study investigates the behavior of precast concrete cantilever wall systems with new vertical connections under cyclic loading. C-type steel connections for PC wall systems are proposed for the transfer of bending moments between walls in the vertical direction, whereas a shear key in the center of the wall is prepared to transfer shear forces by bearing pressure. The proposed connections are assembled easily because the directions of the slots are different at the edges of the walls. Structural performance characteristics such as the strength, ductility, and failure modes of test specimens were investigated. The longitudinal reinforcing steel bars, which are connected to the C-type connections, yielded first. Ultimate deformation was terminated owing to premature failure of the connections. The strength and deformation obtained from the cross-sectional analysis were generally similar to experimental data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.353-358
• /
• 2004

We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{circ}C$, $-60^{circ}C$, $-80^{circ}C$, and $-100^{circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. And there is a difference between shot peened specimen and unpeened specimen. The purpose of this study is to predict the behavior of fatigue crack propagation as one of fracture mechanics on the compressive residual stress. Fatigue crack growth rate of shot peened metal was lower than that of unpeened metal. The compressive residual stress made an impact on tension and compression of the plasticity deformation in fatigue crack plasticity zone. That is. the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation.

• Structural Engineering and Mechanics
• /
• 제24권2호
• /
• pp.227-245
• /
• 2006

The performance of a three dimensional non-linear finite element model for hyperelastic material considering the effect of compressibility is studied by analyzing rubber blocks under different modes of deformation. It includes simple tension, pure shear, simple shear, pure bending and a mixed mode combining compression, shear and bending. The compressibility of the hyperelastic material is represented in the strain energy function. The nonlinear formulation is based on updated Lagrangian (UL) technique. The displacement model is implemented with a twenty node brick element having u, ${\nu}$ and w as the degrees of freedom at each node. The results obtained by the present numerical model are compared with the analytical solutions available for the basic modes of deformation where the agreement between the results is found to be satisfactory. In this context some new results are generated for future references since the number of available results on the present problem is not sufficient enough.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.973-978
• /
• 2007

본 논문에서 가정용 진공청소기의 여러 조건하에서의 열변형 형태를 유한요소해석을 통해서 예측하고 이를 실험을 통하여 비교하였다. 유한요소해석에 있어서 (1) 벨트장력에 의한 압축력이 작용하였을 경우 (2) 벨트와 회전축의 마찰열 (3) 벨트장력과 열하중이 각각 고려되었을 경우의 3가지 조건을 대입하여 흡입구 커버의 변형 상태를 예측하였다. 또한 해석 결과를 실(real) 제품의 성능테스트를 통하여 비교하였고 내부 온도 상승을 방지할 수 있는 근본적인 개선 대책을 제시하였다.

• Advances in materials Research
• /
• 제3권1호
• /
• pp.283-295
• /
• 2014

In this paper, the microstructure, hardness, tensile deformation and fracture behavior of high strength alloy steel X2M is presented anddiscussed. The influence of both composition and processing on microstructure of the as-provided material and resultant influence of microstructure, as a function of orientation, on hardness, tensile properties and final fracture behavior is highlighted. The macroscopic mode and intrinsic microscopic features that result from fracture of the steel specimens machined from the two orientations, longitudinal and transverse is discussed. The intrinsic microscopic mechanisms governing quasi-static deformation and final fracture behavior of this high strength steel are outlined in light of the effects oftest specimen orientation, intrinsic microstructural effects and nature of loading.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.37-45
• /
• 2024

Steel plate shear walls (SPSWs) have been recognized as an effective seismic-force resisting systems due to their excellent strength and stiffness characteristics. The infill steel plate in a SPSW is constrained by a boundary frame consisting of vertical and horizontal structural members. The main purpose of this study was to investigate deformation modes and hysteretic characteristics of steel plate shear walls (SPSWs) to consider the effects of their aspect ratios and width-to-thicness ratios. The finite element model (FEM) was establish in order to simulate cyclic responses of SPSWs which have the two-side clamped boundary condition and made of conventional steel grade. The stress distribution obtained from the FEA results demonstrated that the principal stresses on steel plate with large thickness-to-width ratio were more uniformly distributed along its horizontal cross section due to the formation of multiple struts.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.240-247
• /
• 2014

안압의 측정은 각막에 air puff 후 각막의 변형 즉, 각막의 두께나 변위 등 생역학적 성질을 관찰함으로써 이루어진다. 본 논문에서는 녹내장이나 라식의 진단을 위하여 사용되는 안압계의 air puff에 의한 각막의 변형을 주파수 영역에서 분석하였다. Air puff 후 각막의 중심부 주변의 변위에 대한 진동 주파수를 측정함으로써 환자와 정상인을 구별한다. 동영상으로부터 이진 영상을 구하고, 상하 변위 데이터와 곡선 정합의 차를 구하여 시간에 따른 각막 상하 진동 프로파일 데이터를 추출하였다. Fourier 변환으로 비정상인의 진동 주파수는 479.2Hz를 얻었고 정상인의 경우 단단함으로 인하여 702.8Hz의 고주파 성분을 볼 수 있었다. 또한 Hilbert-Huang 변환의 EMD 방법을 이용, 고유 모드 함수로 분해하여 국소적, 비선형, 비정상성을 가지는 데이터를 얻고 주파수와 전력을 분석하였다. 마지막으로 특정 고유 모드 함수에 대한 환자와 정상인의 전력비가 6배 이상 차이가 나는 것을 확인하였다.