• Proceedings of the Optical Society of Korea Conference
• /
• 1990.07a
• /
• pp.101-105
• /
• 1990

• Proceedings of the Optical Society of Korea Conference
• /
• 1988.06a
• /
• pp.47-54
• /
• 1988

아홉 개의 TEA Co 레이저선에 대한 암모니아 매질의 비선형 굴절계수 (n%)를, 매질을 통과한 광속이 self-focusing 또는 self-defocusing 에의해 겪게되는 공간적 광속 변화를 측정함으로써 결정하였다. 암모니아 매질을 통과하여 변형된 광속의 전장은 가우스 함수의 금수로 주어지는 스미스의 표현(5)으로 근사할수 있었으며, 실험치와 비교하여 보았다. 아홉 개의 레이저선중 여덟 개의 레이저선은 self-focusing 현상을 나타애렀으며9R(16) line은 self-defocusing 현상을 나타내었다.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.99-102
• /
• 2005

This study was conducted for obtaining the optimized data to build the mixer or micro fluid device as measuring the three dimensions flow field in micro mixer. To acquire the rapid diffusion on the region of low Reynolds (Re < 100), the staggered herringbone mixer using chaotic advection was selected in this case. At first, by conducting the numerical analytical virtual experiment using CFD-ACE+, three dimensions flow field in the micro mixer was estimated As this flow field was proven using defocusing particle tracing method, the behavior of micro flow with three dimensional aspects could be analyzed. Numerical analysis and flow pattern in the micro mixer by experimental verification made to be able to analyze the chaotic advection. These can be important sources for building more optimized form. Verifying the information of three dimensional flow structure, these information can be used as the data for developing and improving the $\mu$ -TAS.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.184-188
• /
• 1986

The gain variations of paraboloid reflector antenna with an axially and perpendicularly defocused feed are investigated using the Huygens-Fresnel Principle. The theoretical calculations and the experimental for the reflector antenna with an axially defocused feed are compared. Although there were about 3dB difference between two results in a range from focal point to 2.0 wave-length, we could know that it was property approached to theoretical results. However, when the magnitude of defocusing is increased, the differences are also increased because of the influence by a weak received signal and interference of external noises. In addition, it can be shown that gain variations are acutely decreased more in perpendicular defocusing than in axial defocusing in the paraboloid reflector antenna.

• Journal of information and communication convergence engineering
• /
• v.13 no.4
• /
• pp.270-274
• /
• 2015

In this paper, we propose an improved framework to analyze an N-ocular imaging system under fixed constrained resources such as the number of image sensors, the pixel size of image sensors, the distance between adjacent image sensors, the focal length of image sensors, and field of view of image sensors. This proposed framework takes into consideration, for the first time, the defocusing effect of the imaging lenses according to the object distance. Based on the proposed framework, the N-ocular imaging system such as integral imaging is analyzed in terms of depth resolution using two-point-source resolution analysis. By taking into consideration the defocusing effect of the imaging lenses using ray projection model, it is shown that an improved depth resolution can be obtained near the central depth plane as the number of cameras increases. To validate the proposed framework, Monte Carlo simulations are carried out and the results are analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.981-988
• /
• 2013

In this paper, we propose a method to generate defocusing images at the focusing plane using the 3D spatial information of object through pickup process of integral imaging technique. In the proposed method, the focusing and defocusing images are generated by the convolution operation between elemental images and ${\delta}$ function array. We observed the image difference by defocusing degree according to the distance of focusing plane. To show the feasibility of the proposed method, some preliminary experiments are carried out and the results are presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.219-220
• /
• 1998

Although a single-element synthetic aperture system can produce high-resolution beam profile, it is not a highly practical system because of its low signal to noise ratio against conventional system's. A multi-element synthetic aperture processing has been proposed with defocusing in this paper. A multi element subaperture defocused to emulate a single element spatial response with high acoustic power. The results have higher signal to noise and better contrast resolution than conventional synthetic aperture method.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.63-70
• /
• 1999

Surface hardening of plain carbon steel (SM45C) by Laser are usually much finer and stronger than those of the base metals. The present study was under taken to investigate the wear resistance and a processing parameters such as, power density, pulse width, defocusing distance, and molten depth for surface modification of plain carbon steel. The wear test was carried out under experimental condition using the wear test device, and in which the annular surfaces of wear test specimens as well as mating specimen of alumina ceramics($Al_2O_3$) was rubbed in dry sliding condition. It is shown that molten depth and width depend on defocusing distance. The wear loss on variation of sliding speed was much in lower speed range below 0.2m/sec and in higher speed range above 0.7m/sec, but wear loss was little in intermediate speed range. It depends on oxidation speed and wear speed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.292-299
• /
• 1998

Case hardening behavior of tool steel(SK5) was investigated after YAG laser irradiation. In the case of beam passes, martensite formed in the melt zone and in former pearlite regions of the austenization zone exhibited very high Vickers Hardness values. The molten depth and radius, micro structure, hardness were investigated as a function of defocusing distance, pulse width, and power density.