• Applied Science and Convergence Technology
• /
• 제25권5호
• /
• pp.85-87
• /
• 2016

Coincidence Doppler broadening and positron lifetime methods in positron annihilation spectroscopy has been used to analyze defect structures in metal, semiconductor and polycrystal, respectively. The S parameter and the lifetime (${\tau}$) value show that the defects were strongly related with vacancies. A positive relationship existed between the scanning electron microscope (SEM) images and the positron annihilation spectroscopy (PAS). According to the SEM images and PAS results, measurements of the defects with PAS indicate that it was more affected by the defect than the purity.

• 해양환경안전학회지
• /
• 제3권2호
• /
• pp.13-21
• /
• 1997

This paper describes the effectiveness of laser pulse shaping in eliminating weld defects such as porosity, cracks and undercuts in pulsed Nd:YAG Laser welding. A large porosity was formed in a keyhole mode of deep penetration weld metal of any stainless steel. Solidification cracks were present in Type 303 with about 0.3%s. The conditions for the formation of porosity were determined in further detail in Type 316. With the objectives of obtaining a fundamental knowledge of formation and prevention of weld defects, the fusion and solidification behavior of a molten puddle was observed during laser spot welding of Type 310S. through high speed video photographing technique. It was deduced that cellular dendrite tips grew rapidly from the bottom to the surface, and consequently residual liquid remained at the grain boundaries in wide regions and enhanced the solidification cracking susceptibility. Several laser pulse shapes were investigated and optimum pulse shapes were proposed for the reduction and prevention of porosity and solidification cracking.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.59-63
• /
• 2010

This paper proposes computer visual inspection algorithms for various LCD defects which are found in a manufacturing process. Modular vision processing steps are required in order to detect different types of LCD defects. Those key modules include RGB filtering for pixel defects, gray-scale morphological processing and Hough transform for line defects, and adaptive threshold for spot defects. The proposed algorithms can give users detailed information on the type of defects in the LCD panel, the size of defect, and its location. The machine vision inspection system is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithms are quite successful.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.335-342
• /
• 2005

This study was undertaken to investigate possibility of the allogenic type I collagen inducing osteoinduction or osteoconduction at critical sized bone defect in the rabbit. Twenty Newzealand white rabbit, weighted from 2.8 kg to 3.5 kg, were used in this study. The skull was exposed and two bony defects were created with diameter of 10 mm. Group I(n=10), the bony defects was grafted from the other side bone. Group II(n=10), the bony defects was grafted by the allogenic type I collagen with bone morphogenic protein(BMP). Group III(n=10), the bony defects was grafted by the allogenic type I collagen only. Group IV(n=10), the bony defects was lefted with no grafts. The grafted bones and allogenic type I collagen were investigated with radiologic densitometry, histologic analysis and immunohistochemistry after 12 weeks. No major difference was observed in the gross finding between Group I, II, III, but dura mater was exposed in bony defect,the Group IV. The radiologic study demonstrated more bony opacity in the Group I, but the other groups did not demonstrate a significant difference. In the histologic study, grafted bone edge was completely consolidated with original bone in group I and new bone ingrew into the grafted allogenic type I collagen(group II, III),but there is no bone regeneration from the original bony edge in the group IV. The percent of the new bone formation by cross-sectional area was considered statistically significant at a p value of less than 0.05(p<0.05). In the immunohistochemistry study about BMP antibodies, the group IV demonstrated osteogenic activity in front of advancing original bone edge, in which the osteoblast stained strongly for BMP antibodies, but other group does not demonstrated any osteoblastic expression. There was no immunologic rejection. In conclusion, this results do not demonstrate that the allogenic type I collagen is useful for bone substitute, but the characters of the collagen, such as pliability, easy-handling, sponge-like structure, are useful in interpositional bone graft substitutes. The further evaluation of long term results about the resorption, immunologic tissue reaction, response of applied tissue growth factor to the allogenic collagen is needed.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1618-1625
• /
• 2006

During the last two decades, several guidelines have been developed and used for assessing the integrity of a defective steam generator (SG) tube that is generally caused by stress corrosion cracking or wall-thinning phenomenon. However, as some of SG tubes are also failed due to fretting and so on, alternative failure estimation schemes are required for relevant defects. In this paper, parametric three-dimensional finite element (FE) analyses are carried out under internal pressure condition to simulate the failure behavior of SG tubes with different defect configurations; elliptical wear, tapered and flat wear type defects. Maximum pressures based on material strengths are obtained from more than a hundred FE results to predict the failure of SG tube. After investigating the effect of key parameters such as defect depth, defect length and wrap angle, simplified failure estimation equations are proposed in relation to the equivalent stress at the deepest point in wear region. Comparison of failure pressures predicted by the proposed estimation scheme with corresponding burst test data showed a good agreement.

• 한국음향학회지
• /
• 제14권6호
• /
• pp.62-67
• /
• 1995

본 논문에서는 금속내부에 존재하는 결함의 다양한 형태로부터 반사된 초음파 신호를 디지탈 신호처리에 의하여 특징추출하는 방법을 연구분석하였다. 다양한 형태의 결함으로부터 반사된 초음파 신호는 잡음 등의 영향으로 그 특징의 구별이 애매하므로 자기 회기법(auto-regressive)을 이용한 위너 필터링(Wiener filtering)과 최소 절대치 노름(least-absolute-values norm) 기법을 사용하여 신호의 특징을 추출하고 상호 비교분석하였다. 실험에서는 알루미늄 시편에 평면결함, 사각결함, 원형결함의 세가지 결함형태를 제작하였으며, 초음파를 입사하고 펄스-에코 방법에 의하여 반사신호를 측정하였다. 반사신호의 디지탈 신호처리 결과, 이러한 특징추출방법은 다양한 형태의 결함으로부터 반사된 신호를 효율적으로 분류 할 수 있었다.

• Journal of Chest Surgery
• /
• 제10권2호
• /
• pp.268-273
• /
• 1977

During the period from March, 1963, to November, 1977, forty-eight patients with secundum type atrial septal defects have undergone surgical repair using cardiopulmonary bypass with a pump oxygenator at the Seoul National University Hospital. Twenty-six [55 percent] of the patients were females and Twenty-two [45 percent] were males. The patients varied in age from 3 years to 51 years. We have divided secundum defects into three types. These are: 1] the high defect; 2] Ovale type defect; and 3] low defect including the defect in the area of the coronary sinus. An ovale type defect was present in forty-one cases [85 percent]. Partial anomalous pulmonary venous connections were present in two patients in the high defect group. All of the forty-eight patients had had right heart catheterization before operation. The pulmonary to systemic flow ratio [Qp/Qs] was determined in our 38 patients. The Qp/Qs was less than 1.5/1 in only five of the 38 patients. Among the 33 patients with moderate and severe left-to-right shunts [Qp/Qs 1.6-3.5/1], the systolic pulmonary artery pressures. ranged from 30 to 80 mm Hg. Large left-to-right shunts [Qp/Qs>3.6/1] were present in 13 patients. The postoperative complications occurred in 13 patients [27. 1 percent]. Postoperative wound infections were the most frequent complications being present in 6 patients [12.5%]. Forty-six of the patients with secundum atrial septal defects survived surgical repair of their defects. Thus the hospital mortality of surgery was 4.2 percent. The causes of death in the early postoperative period were: 1] low cardiac output syndrome related to severe pulmonary hypertension in one case; and 2] postoperative several bleeding in one case.

• 산업경영시스템학회지
• /
• 제45권4호
• /
• pp.157-166
• /
• 2022

In the case of a die-casting process, defects that are difficult to confirm by visual inspection, such as shrinkage bubbles, may occur due to an error in maintaining a vacuum state. Since these casting defects are discovered during post-processing operations such as heat treatment or finishing work, they cannot be taken in advance at the casting time, which can cause a large number of defects. In this study, we propose an approach that can predict the occurrence of casting defects by defect type using machine learning technology based on casting parameter data collected from equipment in the die casting process in real time. Die-casting parameter data can basically be collected through the casting equipment controller. In order to perform classification analysis for predicting defects by defect type, labeling of casting parameters must be performed. In this study, first, the defective data set is separated by performing the primary clustering based on the total defect rate obtained during the post-processing. Second, the secondary cluster analysis is performed using the defect rate by type for the separated defect data set, and the labeling task is performed by defect type using the cluster analysis result. Finally, a classification learning model is created by collecting the entire labeled data set, and a real-time monitoring system for defect prediction using LabView and Python was implemented. When a defect is predicted, notification is performed so that the operator can cope with it, such as displaying on the monitoring screen and alarm notification.

• 한국건축시공학회지
• /
• 제17권4호
• /
• pp.385-391
• /
• 2017

공동주택의 공종별 책임 하자 보증기간은 과학적인 분석에 근거를 두지 않고 있어. 기간의 적절성이 분쟁의 원인이 되고 있다. 이에 따라 본 연구에서는 2010~2011기준 국토교통부 하자심사 분쟁조정위원회에 접수된 하자제기건수 중 공동주택 하자 중 가장 많이 제기된 마감공사의 하자실태를 파악하여 하자보수기간의 적절성을 평가하고자 하였다. 마감공사의 하자청구건수를 분석한 결과 대부분의 공종별 하자는 2년 이후에도 나타나고 있으며, 60% 정도만이 하자담보책임기간 내에 청구되고 있는 실정이다. 공종별 하자는 상호간에 연관성을 가지고 있으며 이러한 점은 시공의 관리 차원에서 고려되어 공법의 개선이 필요한 것으로 나타났다. 공동주택의 선호도에 큰 영향을 끼치는 시공능력평가 순위와 하자발생의 상관성이 낮은 것으로 보아 실제 수행하는 전문업체의 하자관련 검증 절차가 필요한 것으로 판단된다.

• 한국결정성장학회지
• /
• 제11권3호
• /
• pp.89-95
• /
• 2001

규소 결정의 용융 온도 근처인 $1350^{\circ}C$에서 Ar과 $O_{2}$gas를 이용하여 규소 wafer의 열처리시 vacancy ty[e 결함의 거동에 대해 알아보았다. 이 열처리에서는 wafer의 표면보다 wafer내부에서 결함의 용해속도가 매우 높음을 확인하였다. 이는 $1350^{\circ}C$에서는 규소내의 평형산소농도가 대부분의 CZ silicon에서의 산소농도보다 높아 산소의 understaturation현상과 silicon interstitial농도의 영향에 기인된 것으로 예상된다. 열처리 분위기의 영향을 알아보기 위하여 Ar과 $O_{2}$ 분위기에서 열처리한 결과 vacancy type 결함의 용해속도는 wafer의 내부에서는 차이가 없었고, wafer의 표면에서는 Ar이 $O_{2}$의 경우보다 결함의 용해속도가 높았다. $O_{2}$의 경우에는 표면산화막 성장시 유입된 silicon interstitial의 농도가 높아 결함의 용해속도가 떨어지는 것으로 판단된다. 이는 기존 연구에서 예상된 silicon interstitial이 vacancy cluster로 알려진 결정결함의 제거에 기여한다는 예상과는 상반된다. 본 연구의 결과 silicon interstitial의 존재는 void외부 산화막의 용해속도를 늦추어 결함 용해속도를 떨어뜨리는 것으로 예상된다.