• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.42-50
• /
• 2008

To evaluate rock bolt integrity, destructive test such as pull-out test has been commonly carried out. This method is known as time consuming, expensive, and inaccurate procedure. To improve destructive method, non-destructive techniques using transmitted guided ultrasonic waves were suggested. Note for the transmission method, the source for the generation of ultrasonic waves should be installed during the rock bolt construction. The purpose of this study is to investigate the reflection method using reflected guided ultrasonic waves to evaluate the integrity of the rock bolt grouted, and to compare the results evaluated by the reflection and transmission methods. The guided waves are generated by PZT element and received by AE sensor. The measured signals are analyzed by the wavelet transform. The results show that the energy velocities of guided ultrasonic waves increase with the defect ratio in both transmission and reflection method. The reflection method produces the lower velocity in all defect ratio. This research demonstrates that the reflection method may be suitable and easer method for the field tests.

• 소성∙가공
• /
• 제1권1호
• /
• pp.66-74
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created in extrusion or drawing processes. The process factors which affect the generation of defects are semi-angle of die, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the possibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of round holes with process conditions such as semi-angle of die, reduction ratio of cross-sectional area and friction factor at the non-steady state of axisymmetrical extrusion process when the round hole is already existed inside the original billet. Also, the effects of process factors are investigated to prevent the possible defects.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.69-76
• /
• 2013

This paper presents the development of the FCF method for the manufacturing of final products using numbers related to the minimum amount of work. The utilized product is a drum clutch, which is part of the transmission of an automobile. A double acting press is secured first and a prediction of the forming load on the practical material is made through an experiment with a plasticine model. Also, a finite element simulation using product shape and properties is performed, as well as a press experiment. A double acting press is manufactured that is suitable for a double acting experiment with a conventional hydraulic press(200 tons). A peripheral device for the press is additionally designed for experimental purposes. And, the press has as its essential points the drive speed, stroke control, etc., all of which influence the forming and is modified. Especially, a laser system is used for velocity measurement of two punches. The forming load of a practical material is predicted in order to derive a forming load formula for cold conditions on the basis of approximate similarity theory. Finite element analysis of the relative velocity ratio(RVR), etc., for most suitable flow defect(unfilling, etc.) prevention is achieved as well. The results are verified through a press experiment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.291-291
• /
• 2011

1차원 반도체인 nanowires (NWs)는 전기적, 광학적으로 일반 bulk구조와 다른 특성을 가지고 있어서 현재 많은 연구가 되고 있다. 일반적으로 NWs는 Au 등의 금속 촉매를 이용하여 성장을 하게 되는데 이때 촉매가 오염물로 작용을 해서 결함을 만들어서 bandgap내에 defect level을 형성하게 된다. 본 연구는 Si(111) 기판 위에 Ga-droplet을 촉매로 사용을 하여 molecular beam epitaxy로 성장을 하였다. 성장온도는 600$^{\circ}C$로 고정을 하였고 growth rate은 GaAs(100) substrate에서 2.5 A/s로 Ga의 양을 고정하고 V/III ratio를 1부터 8까지 변화를 시켰다. As의 양에 따라서 생성되는 NWs의 개수가 증가하고 growth rate이 빨라지는 것을 확인할 수 있었다. Transmission Electron Microscopy 분석 결과 낮은 V/III ratio에서는 zincblende, wurtzite 그리고 stacking faults 가 혼재 되어 있는 것을 확인 할 수 있었다. 이러한 결함은 소자를 만드는데 한계가 있기 때문에 pure zincblende나 pure wurtzite를 가져야 하는데 V/III ratio : 8 에서 pure zincblende구조가 되었다. Gibbs-Thomson effect에 따르면 구조적 변화는 Ga droplet과 NWs의 접면에서 크기가 중요한 역할을 한다[1]. 연구 결과 V/III ratio : 8일 때 Ga droplet의 크기가 zincblende성장에 알맞다는 것을 예상할 수 있었다. laser confocal photoluminescence 결과 상온에서 1.43 eV의 bandgap을 가지는 bulk구조와는 다른 와 1.49eV의 bandgap을 가지는 것을 확인하였다.

• 한국재료학회지
• /
• 제2권4호
• /
• pp.248-256
• /
• 1992

본 논문에서는 ATi$O_3$(A=Ca, Sr, Ba) 조성을 갖는 단순 페롭스카이트 구조에서 생성되는 격자결함 구조에 대하여 고찰하였다. 페롭스카이트 구조는 고충전밀도를 갖기 때문에 프렌클 결함은 고려되지 않았다. 쇼트키결함이나, 고유전자결함도 자연적으로 포함된 억셉타 불순물 농도에 비하면 무시할 정도로 적은 양이다. 실제적으로 전기적 특성에 영향을 주는 것은 전하적 결함을 발생하는 aliovalent 불순물이다. 삼성분계이기 때문에 양이온간의 비화학양론이 발생하며 BaTi$O_3$나 SrTi$O_3$에서 수백 ppm이내의 AO나 Ti$O_2$의 용해도가 관찰되나, CaTi$O_3$에서는 상당량의 CaO와 $TiO_2의$ 용해가 가능하다.

• 한국진공학회지
• /
• 제13권2호
• /
• pp.92-98
• /
• 2004

양전자 소멸 분광법으로 시료에서 원자 크기 정도 결함의 특성을 조사하였다. 양전자와 전자의 쌍소멸에서 발생하는 511 KeV 감마선 스펙트럼의 수리적 해석 방법인 S-변수를 사용하여, 결함의 정도를 측정하였다. 임상에서 X-선 증감지로 0, 2, 4, 6년 동안 사용한 시료를 실험하였다. 각 시료들에서 측정된 S-변수는 0.4932부터 0.4956 정도의 변화를 보였다. 이에 상응하는 실험 방법으로 같은 시료에 X-선의 에너지와 조사시간 즉 6 MV 및 15 MV의 X-선을 사용하여 3, 6, 9, 그리고 12 Gy의 조사량을 변화시키면서 결함의 정도를 측정 비교하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.89-93
• /
• 2002

This paper introduces a vision-based on-line fabric inspection methodology of woven textile fabrics. Current procedure for determination of fabric defects in the textile industry is performed by human in the off-line stage. The advantage of the on-line inspection system is not only defect detection and identification, but also 벼ality improvement by a feedback control loop to adjust set-points. The proposed inspection system consists of hardware and software components. The hardware components consist of CCD array cameras, a frame grabber and appropriate illumination. The software routines capitalize upon vertical and horizontal scanning algorithms characteristic of a particular deflect. The signal to noise ratio (SNR) calculation based on the results of the wavelet transform is performed to measure any deflects. The defect declaration is carried out employing SNR and scanning methods. Test results from different types of defect and different style of fabric demonstrate the effectiveness of the proposed inspection system.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.50-58
• /
• 2008

The SM45C metallic coupons have been tested under static tensile loading with acoustic emission (AE) as the load-deflection curve mainly. In this study, we used AE to detect the yielding of material and AE techniques was applied to rapidly estimate the mechanical characteristics of a material. First, coupons without an artificial defect were tested at different cross-head speed. For all cases in this analysis, yielding point of SM45C coupons did not appear definitely compared to mild steel, whereas coupons start to generate AE counts upon yielding. So all cases are normalized to know the possibility of accelerated life test of a material. And next, coupons with different from sizes of circular hole defects were tested at the same cross-head speed of 5 mm/min. Results were classified into 3 classes and analyzed by AE amplitude & signal strength as a function of time. Summarizing the specific conclusions, we need to additional research considering plate with width-ratio in order to estimate the fracture mechanism.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.272-280
• /
• 1991

The aims of this study were to investigate the feasivility of analyzing a few sorting factors such as size, coloration and defect of apples with a monochrome image processing system and to find apparent properties which could be effectively used for apple sorting. The results are summarized as follows. 1. A computer program was made to analyze the projection area, coloration and defect of an apple with a monochrome image processing system. 2. The algorithm developed to compute the projedtion area of an apple was between on the proportional relation between a given reference area and the corresponding number of pixels, and the computing time was 0.74 to 0.82 second depending on the size of apple. 3. The coloration of an apple was expressed as the ratio of the gray value of a reference color to that of a given bounded area of the stem end surface (defined as coloration index), and the computing time was about 3.0 seconds with this algorithm. 4. Defect of an apple could be isolated by lowpass filtering and image subtraction but it took about 20 seconds in computing time. 5. The coloration of the Fuji apple could be classified into 3 to 4 groups by the coloration index and also, it was found that the correlation coefficient between the indices and sugar contents was 0.74. 6. The coloration index obtained from a given bounded area of the stem end side of the Fuji apple could represent the coloration of total surface with a correlation coefficient of 0.922.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.162-167
• /
• 2010

We investigated the adsorption and desorption characteristics of benzene molecules on $Si(001)-2{\times}n$ surfaces using a variable-low temperature scanning tunneling microscopy. When benzene was adsorbed on a $Si(001)-2{\times}n$ surface at a low coverage, five distinct adsorption configurations were found: tight-binding (TB), standard-butterfly (SB), twisted-bridge, diagonal-bridge, and pedestal. The TB and SB configurations were the most dominant ones and could be reversibly interconverted, diffused, and desorbed by applying an electric field between the tip and the surface. The population ratios of the TB and SB configurations were affected by the benzene coverage: at high coverage, the population ratio of SB increased over that of TB, which was favored at low coverage. The desorption yield decreased with increasing benzene coverage and/or density of vacancy defect. These results suggest that the interaction between the benzene molecules is important at a high coverage, and that the vacancy defects modify the adsorption and desorption energies of the benzene molecules on Si(001) surface.